This page was exported from Exam for engine [ http://blog.test4engine.com ] Export date:Mon Nov 18 2:28:32 2024 / +0000 GMT ___________________________________________________ Title: EMC DEA-5TT1 Real Exam Questions Guaranteed Updated Dump from Test4Engine [Q18-Q37] --------------------------------------------------- EMC DEA-5TT1 Real Exam Questions Guaranteed Updated Dump from Test4Engine Verified Pass DEA-5TT1 Exam in First Attempt Guaranteed Q18. A network administrator wants to use a subnet that will only have two host addresses. Which subnet mask meets this requirement?  255.255.255.248  255.255.255.252  255.255.255.254  255.255.255.256 Q19. What accurately describes the Simple Network Time Protocol (SNTP)?  Time synchronization algorithms are more complex and account for clock drift.  Client makes sudden changes in time to keep synchronized.  Client synchronizes among a set of distributed time servers.  Implemented on a Dell EMC Network OS 9 and OS 10. Q20. What is the correct sequence of steps that occur in the communications between the client and server to obtain an IP address from a DHCP server? Q21. On which OSI layers do standard ACL filters operate?  2 and 3  2 and 7  3 and 4  4 and 7 ExplanationExplanation/Reference:Q22. Which IEEE standard defines the Data Link Layer, Discovery protocol?  802.1AB  802.1AX  802.1D  802.1W Reference:http://www.ieee802.org/3/frame_study/0409/blatherwick_1_0409.pdfQ23. A Dell EMC Networking N-Series switch is configured on a port channel with LACP using the interfaces Te1/0/1 and Te1/0/2. How is the egress traffic distributed among the interfaces?  Traffic overflow will be sent to the second interface  Interfaces will be used in active/passive  Load balanced per packet using round robin  Load balanced using a hash function Q24. What is the default route preference value for a Border Gateway Protocol (BGP) internal route?  40  110  200  253 Reference:https://downloads.dell.com/manuals/all-products/esuprt_ser_stor_net/esuprt_networking/ networking-n2128px-on_Administrator-Guide_en-us.pdf page 1528.Q25. Which IP address is in the Class B range?  100.100.90.87  126.16.20.48  191.56.44.200  192.15.48.130 Q26. What is the Organizationally Unique Identifier (OUI) in the MAC address 00:C4:4F:23:AF:4A?  00:C4:4F  00:C4:4F:23  23:AF:4A  4F:23:AF:4A Q27. On which OSI layers do standard ACL filters operate?  2 and 3  2 and 7  3 and 4  4 and 7 Q28. In which Spanning Tree protocol state does a port record MAC addresses but does not forward the data?  Forwarding  Blocking  Learning  Listening Q29. What are Network Address Translation (NAT) inside global addresses?  Addresses used by NAT router when sending frames to devices on the local network  Public IP addresses used by the local network to communicate with the Internet  Private IP addresses used by the local network  Pubic addresses used by other networks outside of the local network Q30. Which BASE-T Ethernet standard specifies a CAT6 cable type?  2.5GBASE-T  5GBASE-T  10BASE-T  10GBASE-T Q31. Which port type should be used for only VLAN-unaware devices?  Access port  General port  Hybrid port  Trunk port Q32. Which criteria is used to define an extended MAC ACL filter?  Destination MAC address and Ethernet frame type  Ethernet frame type and frame size  Destination TCP port number and source MAC address  Source and destination MAC addresses Q33. What is the aggregated lanes’ maximum speed rating for a QSFP28 transceiver?  4 Gbps  40 Gbps  112 Gbps  128 Gbps Q34. What accurately describes the Network Time Protocol (NTP)?  Implemented on a Dell EMC Network OS 6.  Time synchronization algorithms do not account for clock drift.  Client synchronizes among a set of distributed time servers.  Client makes sudden changes in time to keep synchronized. Q35. A network administrator is troubleshooting an OSPF routing issue. There are two paths to a destination network from one switch. In addition, one path is comprised of four 1 Gb links. The other path is comprised of two 1 Gb and two 100 Mb links. The administrator ran several trace routes and notices that the packets are swapping back and forth between the two paths.Which corrective action must be taken on the switch infrastructure to correct this issue?  Manually specify the OSPF Router ID on each switch within the path.  Break the paths into multiple OSPF areas.  Change the reference speed used by OSPF in cost calculations on all switches within the path.  Switch all routing protocols to RIPv2. Q36. Router A is directly connected to Router B over an Ethernet link. The local interface address for the Router A Fo0/48 interface is 144.254.32.2/24. Which routing table entry is visible on Router A?  144.254.0.0/16  144.254.0.0/24  144.254.32.0/24  144.254.32.2/24 Q37. Which component translates data, signaling, and protocols to facilitate the data flow between the end device and the network?  Switch  Transceiver  NIC  Port  Loading … Download Real EMC DEA-5TT1 Exam Dumps Test Engine Exam Questions: https://www.test4engine.com/DEA-5TT1_exam-latest-braindumps.html --------------------------------------------------- Images: https://blog.test4engine.com/wp-content/plugins/watu/loading.gif https://blog.test4engine.com/wp-content/plugins/watu/loading.gif --------------------------------------------------- --------------------------------------------------- Post date: 2022-05-23 11:19:35 Post date GMT: 2022-05-23 11:19:35 Post modified date: 2022-05-23 11:19:35 Post modified date GMT: 2022-05-23 11:19:35