This page was exported from Exam for engine [ http://blog.test4engine.com ] Export date:Mon Nov 18 6:24:34 2024 / +0000 GMT ___________________________________________________ Title: [Q15-Q37] Real H35-211_V2.5 dumps - Real Huawei dumps PDF in here [Jul-2022] --------------------------------------------------- Real H35-211_V2.5 dumps - Real Huawei dumps PDF in here [Jul-2022] Realistic Test4Engine H35-211_V2.5 Dumps PDF - 100% Passing Guarantee NEW QUESTION 15(Radio) Regarding multicast, the following description is incorrect  Add Lgmp user under BTV, and by default, multicast users can watch 8 programs.  The user-issued Report is captured in the single board logic and sent to the single board CPU  Device-based global configurations of Layer 2 groups refer to common parameters of protocols ( IGMPProxy, GMP Snoop) to all  When the igmp match mode disables, you need to configure the multicast program group NEW QUESTION 16(Multi-select) esight is a network management software positioned in the enterprise network scenario, whichcan view the details of onu devices, including the following information?  UNT port information  speed  Optical module temperature  The optical module transmits power NEW QUESTION 17(Single choice) The following statement about the PITP protocol is incorrect  The PITP protocol includes pitp P mode and PITP V mode  The purpose of the PITP feature is to provide the upper authentication server with the physical locationinformation of the access user, and the BRAS device can realize the user account and the press positionafter obtaining the user access location information  Bind the authentication of the information to avoid the theft and roaming of the user account  In pitp V mode, the user’s physical location information is added to the PPPOE message sent by the userside to cooperate with the upper-level server for user authentication  PITP P mode can also be called PPOE+ mode NEW QUESTION 18(Radio) To improve link reliability, the LT device passes through two upstream ports 0/19/0 and 0/20/0Configure the Timedelay protection group, which of the following commands is optional  huawei(config)#interface giu 0/19huawei (config-if-giu-0/19)hoffline-tx-off-time 0 500  huawei(protect-group-0)hprotect-group member port 0/19/0 role work  huawei(protect-group-0)aprotect-group enable  huawei(config)=protect-group 0 protect-target sth-nni port workmode timedelay NEW QUESTION 19(Single) A total of 100 multicast users on OLT are watching 20 multicast programs, assuming that eachmulticast program occupies 2M bandwidth, then how much multicast traffic is currently on the OLT upstreamport  200M  100M  40M  50M NEW QUESTION 20The maximum spectroscopic ratio supported by 10G GPON is (Radio) ?  1:64  1:256  1128  132 NEW QUESTION 21Under the H.248 protocol, if the signaling IP and media IP are both 10. 1 1 100/8, voice gateway is 10. 1 1 1.When configuring voIP service, the following command is incorrect  Using the command ip address media10 in voip mode. 1 1 10010 1 1 1 Configure the media IP  Use the reset coldstart command under Voice Interface to make the interface property configuration takeeffect  Use the if-h248 attributei command to configure interface properties under the voice interface  Using the command ip address signaling10 in voip mode. 1 1 10010 1 1 1 Configure the signaling IP NEW QUESTION 22(Single-choice) An IPTV user reflects that the TV cannot be watched, open the debug switch on the OLT side,and the debug printing information is as follows: huawei( config).This can be judged by the results of the query  The poN port multicast bandwidth is insufficient  The user does not have permission to watch the show  IGMP Sakamoto Fussel  User bandwidth validation failed NEW QUESTION 23The number of users under the OLT can also determine whether the VLA is single-layer or dual-layer VLA.Single-layer VLANs can be used when the number of users is small, and dual-layer VLANs must be usedwhen the need to distinguish services and the number of users is second to ().  2K  4K  CS  1K NEW QUESTION 24The Class D multicast address range is from 224. 0 0 0 to 238. 255 255 255  True  False NEW QUESTION 25Layer 2 enables IGMP-snooping , and when the switch port receives an IGMP join packet, it listens for thepacket and adds the corresponding port to the multicast group  wrong  Right NEW QUESTION 26(Radio) In the FTTB/C scenario, ONU is used as an AG device to access the phone, and there is no possiblecause of sound failure for SIP protocol off-hook  There are packet losses in the olt upper-layer network  The ONU side MG interface status is abnormal  The voice server is down  ONU and IMS routes are unreachable NEW QUESTION 27(Multi-select) Query ppPOE simu-lation results on the MDU side as followsFrom the query results, it can be judged ()  The service configuration of ppPoE users is normal  PPPoE user account and authentication method are correct  The link between MDU tone setting and BRAS is ok  The MDU management IP is configured correctly NEW QUESTION 28(Radio) When using the siP protocol, you need to use a local number graph for matching, if you use the defaultmatching mode to match a 7-digit number beginning with 7727, then the following options are available?The figure is  Local-bitmap add huawei normal 7727xxx/7726.  Local-digi tmap add huawei normal 772. /7727xxx  Local-di gi tmap add huawei normal 7727  Local-digitmap add huawei normal 7727xxx/7727 NEW QUESTION 29The (radio) OLT is configured for V2 on the IGMP version when the OLT receives igmr v3 forwarded fromon-T What kind of treatment will be done after joining the message  Normal forwarding  Send a specific group query message  Send a universal group query message  Discard directly NEW QUESTION 30In esight’s OnT zero configuration deployment, do not provision OLT when incrementally configuring OLT.  True  False NEW QUESTION 31(Radio) The downstream effective bandwidth of the GPON PON port is  2G  1.25G  2.5G  2.2G NEW QUESTION 32The DBA scheduling of the GPON system is only for the upstream traffic, and the downstream traffic cannotbe scheduled.  True  False NEW QUESTION 33(Single choice) The following statement about defense MAC Spoofing is wrong  MAC Anti- Mac Spoofing’ features are mutually exclusive with WMAC, SC, PPPOE SMAC features atthe VLA level  After the anti-MAC Spoofing function is enabled, the system automatically implements the dynamicbinding of the AC address to the service flow  After enabling the Anti-MAC Spoofing function, for IPoE users using fixed IP, the user needs to bestatically configured  Turning off the Anti-MAC Spoofing function can only take out the fixed table items, which does notaffect the user’s service application, but the service forwarding surface will be interrupted. NEW QUESTION 34(Single-choice) HSI service uses VLAM tags to bind users precisely, if there are 5K FTTH hanging under theLT Users, which VLAN switching scheme is recommended?  User VLAN->C’VLAN->S+CVLAN  S+C>S+C  c>S  C>S+C  C>S+C NEW QUESTION 35The auto-discovery methods provided by sight are by network segment mode, ARP mode and routing mode.At the same time, you can create a network segment or IP address of a device that does not need to beconnected as an exclusion list. Automatically skips the network segment or IP address configured in theexclusion list during self-discovery of devices.  True  False NEW QUESTION 36(Multiple select) When there is a backbone fiber break or OLT does not detect the expected optical signal(L0S) alarm, the possible cause is that  Rogue ONU exists under the port  The port backbone fiber is faulty  Any power loss or failure under the port  The port laser is turned off NEW QUESTION 37Under IGMP snooping, there are two users on demand under the OLT- the same program, and the olt sendstwo join messages to the multicast router  wrong  Right  Loading … Verified H35-211_V2.5 dumps Q&As Latest H35-211_V2.5 Download: https://www.test4engine.com/H35-211_V2.5_exam-latest-braindumps.html --------------------------------------------------- Images: https://blog.test4engine.com/wp-content/plugins/watu/loading.gif https://blog.test4engine.com/wp-content/plugins/watu/loading.gif --------------------------------------------------- --------------------------------------------------- Post date: 2022-07-15 15:19:19 Post date GMT: 2022-07-15 15:19:19 Post modified date: 2022-07-15 15:19:19 Post modified date GMT: 2022-07-15 15:19:19