This page was exported from Exam for engine [ http://blog.test4engine.com ] Export date:Mon Nov 18 4:45:10 2024 / +0000 GMT ___________________________________________________ Title: [Jul-2022] Pass Cisco 300-815 Tests Engine pdf - All Free Dumps [Q67-Q84] --------------------------------------------------- [Jul-2022] Pass Cisco 300-815 Tests Engine pdf - All Free Dumps Implementing Cisco Advanced Call Control and Mobility Services Practice Tests 2022 | Pass 300-815 with confidence! QUESTION 67Refer to the exhibit.Users report that when they dial to Cisco Unity Connection from an external network, they cannot enter any digits. Assuming only in-band DTMF is supported, what is a reason for this malfunction?  The negotiated RTP port is outside of the range described by RFC, so inband DTMFs do not work.  There is SIP Delayed Offer. DTMF is supported only in Early Offer.  The rtpmap:0 value for the negotiated codec is marking DTMF as inactive.  No DTMF is negotiated. QUESTION 68A user requests a feature to send an active call to the mobile phone number on the physical phone. As an administrator, what should be configured in the Cisco UCM to accomplish this?  A Remote Destination Profile having the same extension as the Mobile phone’s number adds the physical phone’s Directory Number to the RDP as a Remote Destination. Add the softkey “Mobility” to the physical phone’s softkey template.  A Remote Destination Profile having the same extension as the physical phone’s Directory Number, add the mobile phone number to the RDP as a Remote Destination. Add the softkey “Mobility” to the physical phone’s softkey template.  A Remote Destination Profile having the same extension as the Mobile phone’s number adds the physical phone’s Directory Number to the RDP as a Remote Destination. Add the softkey “Join” to the physical phone’s softkey template  A Remote Destination Profile having the same extension as the physical phone’s Directory Number, add the mobile phone number to the RDP as a Remote Destination. Add the softkey “Join” to the physical phone’s softkey template. QUESTION 69An administrator is asked to configure egress call routing by applying globalization and localization on Cisco UCM. How should this be accomplished?  Localize the calling and called numbers to PSTN format and globalize the calling and called numbers in the gateway.  Globalize the calling and called numbers to PSTN format and localize the calling number in the gateway.  Localize the calling and called numbers to E. 164 format and globalize the called number in the gateway.  Globalize the calling and called numbers to E. 164 format and localize the called number in the gateway. QUESTION 70Signal number reach call phone that not answered are leaving voicemails on the cell phone rather the corporate mailbox. Which two options will resolve this issue? (Choose two.)  Check the Enable Extend and Connect checkbox  Check the Enable Unified Mobility features checkbox  Decrease the T302 timer  Decrease the T301 timer Decrease the Answer Too Late timer QUESTION 71Which two types of authentication are supported for the configuration of Intercluster Lookup Service? (Choose two.)  TokenID  username and secret key  TLS certificates  passwords  FQDN of the servers defined in DNS QUESTION 72The administrator of ABC company is troubleshooting a one-way audio issue for a call that uses H.323 protocol (slow-start mode). The administrator requests that you provide the IP and port information of the Real-Time Transport Protocol traffic that had the one-way audio call.You gather the H.225 and H.245 messages for one of the one-way audio calls. Where can you find the RTP IP and port information for both sides? (Note: This call flow has not invoked any media resources like MTP or transcoders).  H.245 Terminal Capability Set  H.245 Open Logical Channel  H.225 Connect  H.245 Open Logical Channel Ack Section: Signaling and Media ProtocolsExplanation/Reference: http://ccievoicehopeful.blogspot.com/2012/09/h323-notes.htmlQUESTION 73A support engineer is troubleshooting a voice network. When conducting a search for call setup details related to calling search space issues, which trace files should be investigated?  CallManager traces  CTI Manager traces  Cisco IP Manager Assistant  Call logs Section: Signaling and Media ProtocolsQUESTION 74You see the voice register pool 1 command in your Cisco Unified Communications Manager Express configuration. Which configuration is occurring in this section?  configuration for a single SIP phone  configuration items common for all SIP phones  configuration for a pool of SIP phones (similar to device pool on Cisco Unified Communications Manager)  configuration for SIP registrar service Reference:https://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cusrst/admin/sccp_sip_srst/configuration/ guide/SCCP_and_SIP_SRST_Admin_Guide/srst_setting_up_using_sip.htmlQUESTION 75CollabCorp is a global company with two clusters, emea.collab corp and apac.collab.corp. URI dialing is implemented and working in each cluster. The company configured routing between clusters to make inter-cluster calls via URI. but this is not working as expected. Which two configuration elements should be checked to resolve this issue? (Choose two.)  directory URI partition  SIP route pattern  intercluster trunk  calling search space and partition  SIP trunk QUESTION 76A user reports that when they attempt to log out from the Cisco Extension Mobility service by pressing the Services button, they cannot log out. What is the most likely cause of this issue?  The Cisco Extension Mobility service has not been configured on the phone.  There might be a significant delay between the button being pressed and the Cisco Extension Mobility service recognizing it. It would be best to check network latency.  The user device profile has not been assigned to the user.  The user device profile is not subscribed to the Cisco Extension Mobility service. QUESTION 77Refer to the exhibit.In an active SIP call between phone user A and phone user B, phone A initiates a call transfer to phone user C.Which two scenarios are correct? (Choose two.)  Phone_A sends a SIP-REFER message to the Cisco Unified Communications Manager with Phone_C information in the Refer-To section.  Phone_B sends a SIP-REFER message to the Cisco Unified CM with Phone_C information in the Refer-To section.  As soon as Phone_A presses the Transfer button for the first time, Phone_B hears the MOH and the MOH audio is chosen from Phone_B User Hold MOH Audio Source settings.  As soon as Phone_A presses the Transfer button for the first time, Phone_B hears the music on hold and the MOH audio is chosen from Phone_A Network Hold MOH Audio Source settings.  As soon as Phone_A presses the Transfer button for the first time, Phone_B hears the MOH and the MOH audio is chosen from Phone_A User Hold MOH Audio Source settings. QUESTION 78An administrator is configuring a cluster for ILS and wants to limit the amount of entities that Cisco Unified Communications Manager can write to the database for data that is learned through ILS. Which service parameter is used to adjust this limit?  ILS Max Number of Learned Objects in Database  ILS Active Learned Object Upper Limit  Global Data Service Parameter Limit  Imported Dial Plan Replication Database Object Lower Limit QUESTION 79Which two types of authentication are supported for the configuration of Intercluster Lookup Service? (Choose two.)  TokenID  username and secret key  TLS certificates  passwords  FQDN of the servers defined in DNS Reference:https://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucm/admin/11_5_1/ sysConfig/11_5_1_SU1/cucm_b_system-configuration-guide-1151su1/cucm_b_system-configuration-guide- 1151su1_chapter_011001.pdfQUESTION 80Which call pickup feature allows users to pick up incoming calls in a group that is associated with their own group?  Other Group Pickup  BLF Call Pickup  Group Call Pickup  Directed Call Pickup QUESTION 81An engineer set up and successfully tested a TEHO solution on the Cisco UCM. PSTN calls are routed correctly using the IP WAN as close to the final PSTN destination as possible. However, suddenly, calls start using the backup local gateway instead. What is causing the issue?  WAN connectivity  LAN connectivity  route pattern  route list and route group QUESTION 82An administrator is troubleshooting call failures on an H.323 gateway via the CLI. To see signaling for media and call setup, which debug must the Administrator turn on?  debug H.323 messages  debug H.225 asn1  debug H.246 asn 1  debug H.225 media  debug H.323 asn 1 Section: Signaling and Media ProtocolsQUESTION 83A single site reports that when they dial select numbers, the call connects, but they do not get audio. The administrator finds that the calls are not routing out of the normal gateway but out of another site’s gateway due to a TEHO configuration. What is the next step to diagnose and solve the issue?  Verify that IP routing is correct between the gateway and the IP phone.  Verify that the route pattern is not blocking calls to the destination number.  Verify that the dial peer of the gateway has the correct destination pattern configured.  Verify that the route pattern has the correct calling-party transformation mask QUESTION 84An engineer is configuring a call park feature in Cisco Unified Communications Manager Express. Which command does the engineer use to ensure that the call is reverted to the user after 60 seconds?  R2(config-ephone-dn)#park reservation-group 60  R2(config-ephone-dn)#park-slot timeout 60 limit 2 recall alternate 3002  R2(config-ephone-dn)#park reservation-group 1  R2(config-ephone-dn)#park-slot timeout 30 limit 2 recall alternate 3002 Section: Cisco Unified CM Call Control Features Loading … What Is 300-815 Exam and Who Is Its Targeted Audience? This 300-815 Implementing Cisco Advanced Call Control as well as Mobility Services exam checks the applicant's understanding of various advanced level call control as well as mobility features. Particularly, such an exam is intended for those with a firm grasp of various signaling and media protocols, gateway technologies, Cisco Unified Border element, CM Call Control, and other related concepts. As for its details, the exam needs to be finished within 90 minutes. Also, the applicant requires an account on Pearson VUE to schedule the exam. Thus, the candidate should select Proctored Exams and enter 300-815 as the test number on the Pearson VUE website. As you keep in mind, securing a passing score in the Cisco 300-815 test will push the entrant a step closer to earning the CCNP Collaboration endorsement.   Online Exam Practice Tests with detailed explanations!: https://www.test4engine.com/300-815_exam-latest-braindumps.html --------------------------------------------------- Images: https://blog.test4engine.com/wp-content/plugins/watu/loading.gif https://blog.test4engine.com/wp-content/plugins/watu/loading.gif --------------------------------------------------- --------------------------------------------------- Post date: 2022-07-22 11:59:12 Post date GMT: 2022-07-22 11:59:12 Post modified date: 2022-07-22 11:59:12 Post modified date GMT: 2022-07-22 11:59:12