This page was exported from Exam for engine [ http://blog.test4engine.com ] Export date:Mon Nov 18 2:18:43 2024 / +0000 GMT ___________________________________________________ Title: JN0-362 Exam Dumps Free Test Engine Verified By JNCIS-SP Certified Experts [Q10-Q31] --------------------------------------------------- JN0-362 Exam Dumps Free Test Engine Verified By JNCIS-SP Certified Experts Use Real Juniper Achieve the JN0-362 Dumps - 100% Exam Passing Guarantee Q10. Click the Exhibit.You are receiving the same route prefix from four EBGP neighbors.Based on the information provided in the exhibit, which route will become active?  Route2  Route3  Route4  Route1 Q11. You have been asked to identify what the contributing routes are for route 204.7.15/21.Which command will show this information?  show route 204.7.15/21  show route 204.7.15/21 extended  show route 204.7.15/21 exact summary  show route 204.7.15/21 detail Q12. Click the Exhibit button.Referring to the exhibit what are two reasons for the configuration stanza? (Choose two.)  to reduce the risk of forwarding traffic through a stateless tunnel  to mark the tunnel down after the hold-time expires  to remove the tunnel interface from inet.0 after the hold-time expires  to mark the tunnel up after the hold-time expires Q13. What happens when a packet matches a static route with the next hop parameter set to reject?  The system silently drops the packet  An ICMP message is sent to the source and the packet is forwarded  An ICMP message is sent to the source and the packet is dropped  The packet is forwarded and the packet is marked as rejected in the header Q14. Which three statements are true regarding the show system switchover operational mode command? (Choose three.)  This command can only be issued on the master Routing Engine.  This command displays the status of graceful switchover.  This command can only be issued on the backup Routing Engine.  This command displays the status of the interface and process databases.  This command displays the status of the kernel database. Q15. Click the Exhibit button.You are troubleshooting a new BGP peering session which is not establishing. Referring to the exhibit, which statement is true?  The update messages contain an unsupported option  The neighbor does not support IPv6  The peer’s AS number is misconfigured  The TCP session is not establishing Q16. Click the Exhibit button.Referring to the exhibit, which statement is correct?  R2 is an ASBR  R1 is a backbone router  R2 is an ABR  R1 is an ABR Q17. Click the Exhibit button.Referring to the exhibit, which statement is correct?  Routes from 10.1.1.1 are less preferred than the default local preference  Routes from 10.2.2.2 are less preferred than routes from 10.1.1.1  Routes from 10.3.3.3 are less preferred than the default local preference  Routes from 10.1.1.1 are less preferred than routes from 10.2.2.2 Q18. Click the Exhibit button.Referring to the exhibit, which statement is correct?  Interface xe-0/0/0.0 has a default metric of 10  Interface ge-3/0/0.0 has a default metric of 10  Interface ge-1/0/0.0 can only form a single adjacency  Interface xe-0/0/0.0 can only form a single adjacency Q19. Click the Exhibit button.You are troubleshooting a new BGP peering session which is not establishing. Referring to the exhibit, which statement is true?  The update messages contain an unsupported option  The neighbor does not support IPv6  The peer’s AS number is misconfigured  The TCP session is not establishing Q20. Which Layer 2 mechanism logically groups network nodes into separate broadcast domains?  IS-IS levels  OSPF areas  VLAN  IP subnets Q21. Click the Exhibit button.Referring to the exhibit, which statement is correct?  Interface ge-3/0/0.0 has a default metric of 10  Interface xe-0/0/0.0 can only form a single adjacency  Interface xe-0/0/0.0 has a default metric of 10  Interface ge-1/0/0.0 can only form a single adjacency Q22. In your network, you have two LDP routers connected across four physical interfaces. You have also enabled LDP to operate on all four of those interfaces.What is the resulting outcome of your configuration between those two routers?  One session is built across one neighbor relationship  One session is built across four neighbor relationships  Four sessions are built across one neighbor relationship  Four sessions are built across four neighbor relationships Q23. Click the Exhibit button.In the network shown in the exhibit, all switches are configured with the default STP root bridge priority, and Switch A has been selected as root. You recently added the older Switch D into the network as an access switch, and notice it has taken over as root.Which configuration would solve this problem?  Option A  Option B  Option C  Option D Q24. Which two statements are true about NSR? (Choose two.)  NSR requires graceful restart to function properly  NSR requires redundant REs.  NSR requires only one RE.  NSR requires GRES to function properly. Q25. Click the Exhibit button.Referring to the exhibit, which two statements are true? (Choose two.)  The BGP peering between R1 and R4 should use loopback interface addresses  The BGP peering between R1 and R4 should use physical interface addresses  The BGP peerings between R1, R2, and R3 should use loopback interface addresses  The BGP peerings between R1, R2, and R3 should use physical interface addresses Q26. What are tree types of interfaces that can be used in an MX Series device when implementing a virtual switch routing instance? (Choose three.)  Trunk interface  Access interface  Layer 2 logical interface  GRE tunnel interface  Logical tunnel interface Q27. To which multicast address is a VRRP advertisement packet sent?  224.0.0.6  224.0.0.18  224.0.0.22  224.0.0.13 Q28. What are two methods for decreasing the size of an OSPF link-state database (LSDB)? (Choose two.)  Ensure that all routers on a shared segment are configured with a priority value of 0.  Use an interface type of p2p when possible.  Segment large groups of routers into areas.  Change a stub area to NSSA when possible. Q29. Which two characteristics describe IS-IS? (Choose two.)  A collection of Level 1 routers serves as the IS-IS backbone  Level 2 routers connect areas in an IS-IS autonomous system  A collection of Level 2 routers serve as the IS-IS backbone  A Level 1 IS routes between areas and toward other autonomous systems Explanation/Reference: https://www.juniper.net/documentation/en_US/junos/topics/concept/isis-levels- understanding.htmlQ30. Click the Exhibit button.Your co-worker configures the ge-0/0/0 interface with an IPv6 address of 2001:db8:0:9::/64. After committing the configuration, your co-worker executes the command shown in the exhibit.What is the fe80::206:aff:fe0e:e01/64 address in this scenario?  the loopback address  the multicast address  the statically assigned address  the link-local address Q31. You want to disable MAC learning only for interface ge-0/0/0.0 on an MX Series device.Which syntax will accomplish this task?         Explanation/Reference: https://www.juniper.net/documentation/en_US/junos/topics/task/configuration/layer-2-services- mac-bridge-domain-or-logical-interface-disabling-learning-for.html Loading … Juniper JN0-362 Exam Topics: SectionObjectivesBorder Gateway Protocol (BGP)Identify the concepts, operation, or functionality of BGPBGP basic operationBGP message typesAttributesRoute/path selection processIBGP and EBGP functionality and interaction Demonstrate knowledge of how to configure, monitor, or troubleshoot BGPGroups and peersAdditional basic optionsRouting policy applicationSpanning-Tree ProtocolsIdentify the concepts, benefits, operation, or functionality of Spanning Tree Protocol and its variantsSTP, RSTP, MSTP and VSTP conceptsPort roles and statesBPDUsConvergence and reconvergenceSpanning-tree security Demonstrate knowledge of how to configure, monitor, or troubleshoot STP and its variantsSpanning-tree protocols: STP, RSTP, MSTP, and VSTPBPDU, loop, and root protectionIntermediate System to Intermediate System (IS-IS)Identify the concepts, operation, or functionality of IS-ISLink-state databaseIS-IS PDUsTLVsAdjacencies and neighborsLevels and areasDesignated intermediate system (DIS)Metrics Demonstrate knowledge of how to configure, monitor, or troubleshoot IS-ISLevels, interfaces and adjacenciesAdditional basic optionsRouting policy applicationTroubleshooting toolsHigh AvailabilityIdentify the concepts, benefits, applications, or requirements of high availabilityLink aggregation groups (LAG) and multichassis LAGs (MC-LAGs)Graceful restart (GR)Graceful Routing Engine switchover (GRES)Nonstop bridging (NSB)Nonstop active routing (NSR)Bidirectional Forwarding Detection (BFD)Virtual Router Redundancy Protocol (VRRP)Unified In-Service Software Upgrade (ISSU) Demonstrate knowledge of how to configure, monitor, or troubleshoot high availability componentsLAG, MC-LAGGR, GRES, NSB, and NSRVRRPISSUMultiprotocol Label Switching (MPLS)Identify the concepts, operation, or functionality of MPLSMPLS terminologyMPLS packet headerEnd-to-end packet flow and forwardingLabels and the label information baseMPLS and routing tablesRSVPLDP Demonstrate knowledge of how to configure, monitor, or troubleshoot MPLSMPLS forwardingRSVP-signaled and LDP-signaled LSPsLayer 2 Bridging or VLANsIdentify the concepts, operation, or functionality of Layer 2 bridging for the Junos OSService provider switching platformsBridging elements and terminologyFrame processingVirtual SwitchesProvider bridging (for example, Q-in-Q Tunneling) Identify the concepts, benefits, or functionality of VLANsPort modesTaggingMVRPIRBDemonstrate knowledge of how to configure, monitor, or troubleshoot Layer 2 bridging or VLANsInterfaces and portsVLANsMVRPIRBProvider bridgingIPv6Identify the concepts, operation, or functionality of IPv6IPv4 versus IPv6Address types, notation, and formatAddress scopesAutoconfigurationTunneling Demonstrate knowledge of how to configure, monitor, or troubleshooting IPv6InterfacesStatic routesDynamic routing: OSPFv3, IS-IS, and BGPIPv6 over IPv4 tunnelingOpen Shortest Path First (OSPF)Identify the concepts, operation, or functionality of OSPFLink-state databaseOSPF packet typesRouter IDAdjacencies and neighborsDesignated router and backup designated routerOSPF area and router typesLSA packet types Demonstrate knowledge of how to configure, monitor, or troubleshoot OSPFAreas, interfaces and neighborsAdditional basic optionsRouting policy applicationTroubleshooting tools   Check the Free demo of our JN0-362 Exam Dumps with 67 Questions: https://www.test4engine.com/JN0-362_exam-latest-braindumps.html --------------------------------------------------- Images: https://blog.test4engine.com/wp-content/plugins/watu/loading.gif https://blog.test4engine.com/wp-content/plugins/watu/loading.gif --------------------------------------------------- --------------------------------------------------- Post date: 2022-10-25 11:35:20 Post date GMT: 2022-10-25 11:35:20 Post modified date: 2022-10-25 11:35:20 Post modified date GMT: 2022-10-25 11:35:20