Updated Apr-2023 Exam H35-480_V3.0 Dumps - Pass Your Certification Exam [Q33-Q51] : Exam for engine : http://blog.test4engine.com

Q33. Which of the following statements about the NR slot structure are correct? (Choose All that Apply)

Downlink slots can only be used to transmit downlink data.

Downlink self-contained slots can be used to transmit uplink data and SRSs.

The number of symbols in one slot is fixed to 14 regardless of the subcarrier spacing configuration.

The symbols in a slot can be classified as downlink, uplink, or flexible.

Q34. At which layer is downlink data split implemented over the NR air interface in the NSA Option 3x architecture?

RLC layer

MAC layer

PDCP layer

Physical layer

Q35. What is the maximum number of PCIs supported by a 5G network?

1008

512

768

384

Q36. What is the maximum MIMO mode supported by Huawei 5G indoor CPE?

4T8R

2T2R

2T4R

4T4R

Q37. What is the required distance between a CPE and a gNodeB in a 5G network test?

Less than 10m

Greater than 5m

Less than 5m

Greater than 10m

Q38. In the inter-site DC solution, the X2 interface can be used to implement transmission interconnection between the LTE and NR sites. Which of the following is the requirement of the transmission delay in such case?

<40ms

<10ms

<30ms

<20ms

Q39. Which of the following MML commands is used to bind a physical sector to an AAU on a gNodeB?

ADD NRCELL

ADD NRDUCELLCOVERAGE

ADD SECTOR

ADD NRLOCELL

Q40. Which of the following NR slot configurations are defined in 3GPP specifications? (Choose All that Apply)

Mixed slot, which contains at least one downlink/uplink symbol while other symbols can be flexibly configured

Flexible-slot (all symbols are flexibly configured)

Downlink-only slot (all symbols are dedicated for downlink)

Uplink-only slot (all symbols are dedicated for uplink)

Q41. Which of the following files must be prepared when remotely commissioning a gNodeB using the MAE Deployment?

Site deployment list

Data configuration file of the base station

Base station software package of the target version

Base station license

Q42. During a 5G service test, an NSA UE connects to the Probe and then accesses a 4G cell. It is found that the cell does not deliver B1measurement configurations. Which of the following is not a possible cause for this?

The UE does not support EN-DC.

The NSA switch is not turned on.

Neighboring LTE cells and SCGs are not configured.

The B1threshold is too high.

Q43. Which of the following 5G massive MIMO scenarios is more suitable for high rise office building coverage?

H45V12

H25V25

H110V6

H45V6

Q44. Which of the following is the correct sequence for adding gNodeB hardware?

RF unit -> Subrack -> Board -> Cabinet

Board -> Cabinet -> Subrack -> RF unit

Cabinet -> Subrack -> Board -> RF unit

Subrack -> Board -> Cabinet -> RF unit

Q45. Which of the following methods can be used by a gNodeB to obtain downlink channel characteristics?

DMRS of the uplink PUSCH of the UE

Downlink DMRS signal

UE-reported uplink PMI

Uplink SRS signal

Q46. Which of the following NR channels or signals supports static and dynamic power control?

PDCCH

PUSCH

SS

PBCH

Q47. Which of the following functions are implemented by the UBBP board in the BBU5900?

Provides CPRI ports for communication with RF modules.

Manages the configuration and devices for the base station.

Monitors performance and processes signals for the base station.

Processes uplink and downlink baseband signals.

Q48. Which downlink data split modes are supported on the gNodeB side in the 5G NSA Option 3x architecture?

MCG_ONLY: only split to the MCG

SCG_AND_MCG: static data split

SCG_ONLY: only split to the SCG

SCG_AND_MCG: dynamic data split

Q49. The mmWave range is new for NR. It supports the largest bandwidth in a cell but has poor coverage capabilities.It requires high performance from RF components and generally applies only to line of sight (LOS) coverage.

True

False