[Q55-Q76] PASS 1z0-1066-22 exam with Oracle Real Exam Questions - 100% Valid! : Exam for engine : http://blog.test4engine.com

Q55. A supply plan has just been run that contains a configured item. You notice that the sourcing rules of the base model were used instead of sourcing rules for the configured item. Why did this happen?

No sourcing rules have been defined for the configured item.

The sourcing rules of the base model overrode the sourcing rules of the configured item.

It is not possible to create sourcing rules for the configured item; all configured items always use the same sourcing rules as the base model.

The sourcing rules of the base model had a priority of 1, while the sourcing rules of the configured item had a priority of 2.

No planning percentages were defined at the operation level within the work definition.

Q56. During implementation, the customer would like to use safety stock planning parameters. However, they would like to uncheck “Safety stock change interval to all items.” What will the results be if they choose to uncheck this parameter?

Safety stock will not be calculated at all for this plan.

This option will require a min/max quantity for this parameter even though it will not be used.

Safety stock will use a smoothing method to calculate the safety stock within change interval to determine the level of safety stock needed without this parameter.

Safety stock change interval will only apply to items with Days of Cover safety stock method.

Q57. Which statement is true about the Production Scheduling Gantt chart?

The Gantt chart is read only, but you can change colors, sizing, and perform filtering.

You can view a Gantt chart or the Dispatch List, but not both at the same time.

The Gantt chart identifies idle time, changeovers, and downtime.

Metrics displayed above the Gantt chart include Late Demands, Late Work Order, Early Work Orders, and Changeover Time.

Q58. You are a demand planner and you want to generate forecast for all laptop and desktop products in the US business unit. You are using standard enterprise and product hierarchy. You have created a demand plan and now you must define plan scope.
Identify three valid steps. (Choose three.)

For plan parameters, select forecasting calendar as Gregorian and time level as week.

For forecasting items, select hierarchy as product, level as category level 1, and laptop and desktop categories as level members.

For plan parameters, select forecasting calendar as Gregorian and time level as month.

For plan organizations, select hierarchy as enterprise, level as country, and US as level member.

For forecasting items, select hierarchy as product, level as product, and all laptop and desktop products as level members.

For plan organizations, select hierarchy as enterprise, level as business unit, and US and level member.

Q59. The structure of the Plan Summary Layout is a predefined __________.

Material Plan view

Set of Exceptions

Supply Demand Workbench

Set of Infotiles

Group of Reports

Q60. A sales order containing a back-to-back item has been created. However, when you ran the supply plan in Planning Central, the supply for the sales order was not released. Why was the supply not released?

The supply plan should have been run in Supply Chain Orchestration, not Planning Central.

Planning Central cannot create back-to-back supply, so the supply cannot be released.

Only Global Order Promising and Supply Chain Orchestration can be used to release and create new supplies for back-to-back orders.

The supply must first be created in Global Order Promising and then it can be released from Planning Central.

Q61. You want to check how many items have excess inventory. Where must you go in Planning Central to find this information?

Open Table, Graph, or Tile Set > Search Exceptions > Open > Expand Supply Planning Exceptions > Select Item with Excess Inventory

Manage Plans > Edit Demand and Supply Plan > Select Supply tab > Navigate to Item area > Filter by Items with Excess Inventory

Manage Plans > Edit Supply Plan > Select Supply tab > Navigate to Item area > Filter by Items with Excess Inventory

Configure Exceptions > Expand Supply Planning Exceptions > Select Item With Excess Inventory

Configure Exceptions > Expand Demand Planning Exceptions > Select Item With Excess Inventory

Q62. Which statement applies only to the planning of back-to-back items and not standard items?

Planning analyzes supply shortages and capacity overloads using any of the standard planning tools.

Must use Global Order Promising and Supply Chain Orchestration to release and create new supplies

Must have added sourcing rules to the Global Order Promising assignment set.

Planning pegs reserved supplies to sales orders.

Planning collects bookings or shipments history to forecast items.

Q63. Which three statements are true about a drop ship validation organization? (Choose three.)

It is the source for organization-item attributes when creating drop ship planned orders.

It can be a Cost Organization.

It is not required in order to use drop shipments.

It cannot be an item organization.

It is a proxy for the organization during the collections of drop ship sales orders and drop ship history.

It can be an item organization.

Q64. When duplicating a supply plan, which parameters can you modify if Copy Type is “copy plan options only”?

Name, Access. Owner, and Notes

Name, Description. Access (but if the original plan was private, you can’t edit the Users list), and Notes

Name, Description. Access. Supply Planning Mode, and Owner

Name, Description. Access. Owner. Include Archive, and Notes

Q65. Which is the correct sequence of possible solutions that a constrained plan might consider when attempting to resolve a capacity or resource overload?

First alternate resources, then substitute components, then alternate work definitions and item structures, and finally, alternate suppliers and source organizations.

First alternate suppliers, then alternate resources, then substitute components, then alternate work definitions and item structures, and finally, alternate source organizations.

First subscribe components, then alternate resources, then alternate work definitions and item structures, and finally, alternate suppliers and source organizations.

First alternate item structures, and work definitions, then substitute components, then alternate resources, and finally, alternate suppliers and source organizations.

Q66. Each of your planners is responsible for a different geography and set of product lines, so each planner needs to see just their own set of data, analyses and dashboards.
How do you configure the application so each planner can have their own custom dashboard viewable only to themselves?

Create public page layouts that are tailored to specific business needs.

Create private page layouts that are tailored to specific business needs.

You cannot create custom dashboards by user.

Enable layout security checkbox in the Administer Planning Security

Q67. Which attribute or attributes can you maintain via the Maintain Supply Network Model task?

For Carriers: Enabled

For Customers. Suppliers, and Organizations: Time Zone

For Organizations: Supply Past Due. Customer, and ABC Assignment Group

For Interlocation Shipping Networks: Carrier. Mode of Transport, and Service Level

Q68. You have executed Planning Data Collection and want to confirm that data has successfully been collected. Identify the three data combinations that can be viewed using the Maintain Supply Network Model Page. (Choose three.)

Customer Location and Carriers

Safety Stock and Subinventories

Sales Channel and Demand Class

Calendar and Master Organization

Supplier Site and Service Level

Q69. Your client has a requirement to restrict Supply Plan data access. Identify three Data Access Set detail entities that can be used to restrict plan data access. (Choose three.)

Supplier

Item

Transaction Type

Customer

Material Planner

Demand Class

Q70. Which is the proper fulfillment strategy to plan for supply using the appropriate lead times required for processing material at a third party, based on the manufacturing work definition?

outside processing operations

expense destination transfers

contract manufacturing

back-to-back orders

drop shipments

Q71. Your customer has loaded shipment history of 1/1/14 through 12/31/16 and wants to generate a monthly forecast of 1/1/17 through 12/31/17 based on two-year shipment history.
When creating a demand plan, which two plan scopes and demand plan options should your customer use? (Choose two.)

For demand plan option, add forecast shipments as forecasting profile, enter history start date as 1/1/15, enter history end date as 12/31/15, and enter forecast start date as 1/1/17.

For demand plan option, add forecast shipments as forecasting profile, and enter historical buckets as 24.

For demand plan option, add forecast shipments as forecasting profile, enter history start date as 1/1/15, forecast start date as 1/1/17, and enter forecast end date as 12/31/17.

For demand plan option, add forecast shipments as forecasting profile, enter historical buckets as 24, and enter forecast buckets as 12.

For plan scope, select plan horizon days as 365, forecasting calendar as Gregorian, and forecasting time level as month.

For plan scope, select plan horizon as 12 months, forecasting calendar as Gregorian, and forecasting time level as month.

Q72. Planners are complaining about getting too many exception messages, some of which have minima value for evaluating plan health.
Which three solutions could reduce message clutter? (Choose three.)

Go to Configure Exceptions, and specify a threshold for various messages.

Go to Configure Exception Sets, and for the currently used exception set. specify a threshold for various messages.

Go to Configure Exception Sets, duplicate the currently used exception set, remove the undesired messages from the duplicate set. then assign the duplicate set to all plans.

Go to Configure Exception Sets, create a new set with only the messages the planners care about, and then, set all supply plans to use this new exception set.

Q73. Your client manufactures consumer electronics and has all facilities live on Oracle Cloud. Their latest product has a very complicated manufacturing process and therefore can only be made at one facility (Organization ABC). However, it is ordered all over the world.
How should the Sourcing Rule be set up to accomplish this?

A global sourcing rule for 50% make at ABC and 50% buy from ABC

A local sourcing rule for 100% make at ABC; a global sourcing rule for 100% transfer from ABC

A local sourcing rule for 100% make at ABC; a global sourcing rule for 100% buy from ABC

A local sourcing rule for 100% buy from ABC; a global sourcing rule for 100% transfer from ABC

A global sourcing rule for 100% make at ABC; a local sourcing rule for 100% transfer from ABC

Q74. What are two characteristics of an ‘Item’ organization? (Choose two.)

It includes parameter definition, including lot. serial number, and item sourcing rules.

It requires financial and accounting setups.

It does not physically of financially track material storage or movement.

It is ideal for deployments where inventory management may not be installed.

Q75. You are running a demand plan for the first time and you want to generate forecast for the next six months. Which two demand plans run options should be selected? (Choose two.)

Under data refresh options, select “Refresh with selected current data” and chose sales orders.

Under data refresh options, select “Refresh with current data.”

Select sales orders as forecast profile.

Select forecast shipments as forecast profiles.

Under data refresh options, select “Refresh with demand planning data.”

Q76. Which release recommendation parameter can you utilize to govern the behavior of the auto-release process?

Release Only by User

Auto-Release Interval in Days

Auto-Release Planned Order Time Fence

Quick Release Time Fence

Compression Days Tolerance for Automatic Release