This page was exported from Exam for engine [ http://blog.test4engine.com ] Export date:Mon Nov 18 2:51:08 2024 / +0000 GMT ___________________________________________________ Title: HP HPE6-A73 Real Exam Questions Guaranteed Updated Dump from Test4Engine [Q12-Q31] --------------------------------------------------- HP HPE6-A73 Real Exam Questions Guaranteed Updated Dump from Test4Engine Verified Pass HPE6-A73 Exam in First Attempt Guaranteed HPE6-A73 exam covers a range of topics, including implementing and configuring Layer 2 and Layer 3 features, troubleshooting ArubaOS-Switches, and implementing security features. Candidates are also tested on their ability to design and implement redundancy solutions, integrate ArubaOS-Switches with other Aruba products, and implement Quality of Service (QoS) mechanisms. Passing the HPE6-A73 exam demonstrates that an individual has the knowledge and skills required to configure and manage complex Aruba campus switching solutions, making them a valuable asset to any organization that uses Aruba technology.   NEW QUESTION 12A network administrator is implementing NAE on AOS-CX switches. When attempting to create an agent on a particular switch, the agent appears in the NAE Agents panel with a red triangle error symbol and a status of “Unknown”.What is the cause of this issue?  The administrator does not have the appropriate credentials to interact with NAE  The number of scripts or agents has exceeded the hardware’s capabilities  A connectivity issue exists between NAE and the AOS-CX switch  The RESTful API has not been enabled on the AOS-CX switch https://www.arubanetworks.com/techdocs/AOS-CX/10.06/HTML/5200-7717/Content/Chp_TS/err-nae-age-not-cre-db-con-vio-err.htmNEW QUESTION 13A company is implementing a new wireless design and needs it to support high availability, even during times of switch system upgrades. The solution will involve Aruba Mobility Controller (MC) and Aruba AP connections requiring POE. Which campus AOS-CX switch solution and virtual switching should the company implement at the campus access layer?  AOS-CX 6400 and VSX  AOS-CX 6300 and VSF  AOS-CX 8325 and VSF  AOS-CX 8400 and VSX NEW QUESTION 14A network has two AOS-CX switches connected to two different service providers The administrator is concerned about bandwidth consumption on the service provider links and learned that the service providers were using the company as a transit AS.Which feature should the administrator implement to prevent this situation?  Configure a classifier policy to disable MED.  Configure route maps and apply them to BGP  Configure the two switches as route reflectors.  Configure bi-directional forwarding detection on both switches. NEW QUESTION 15An administrator is configuring BGP and has two connections to a service provider to two different local routers.Which BGP metric should the administrator configure to influence which local router the service provider will use to reach certain routes?  Weight  Multiple exit discriminator  Local preference  Origin NEW QUESTION 16An administrator wants to use an existing Aruba gateway’s firewall policies to filter both wireless and wired traffic. Which AOS-CX switch feature should a customer implement to ensure the gateway applies the same or similar firewall policies to users’ wired and wireless traffic?  GRE tunneling  User-based tunneling  Port-based tunneling  IPSec tunneling NEW QUESTION 17The AOS-CX mobile app allows a network engineer or technician to perform which tasks? (Choose two.)  Use NetEdit to manage switch configuration.  Create a stack of AOS-CX switches.  Transfer files between the switch and your mobile device.  Securely access the switch using SSH.  Schedule an operating system upgrade. NEW QUESTION 18A network administrator is attempting to troubleshoot a connectivity issue between a group of users and a particular server. The administrator needs to examine the packets over a period of time from their desktop; however, the administrator is not directly connected to the AOS-CX switch involved with the traffic flow.What is correct regarding the ERSPAN session that needs to be established on an AOS-CX switch?(Choosetwo.)  On the source AOS-CX switch, the destination specified is the switch to which the administrator’s desktop is connected  On the source AOS-CX switch, the destination specified is the administrator’s desktop  The encapsulation protocol used is GRE  The encapsulation protocol used is VXLAN  The encapsulation protocol is UDP NEW QUESTION 19Examine the VSX-related configuration of the core layer AOS-CX switch:A network administrator is troubleshooting a connectivity issue involving the VSX LAG (link aggregation) between the core and access layer switch, during HW replacement of one of the core switches.Which configuration should the administrator add to the core switch to fix this issue?  ICX-Tx-Core1(config)# vsxICX-Tx-Core1(config-vsx)# system-mac 02:01:00:00:01:00  ICX-Tx-Core1(config)# interface lag 1 multi-chassisICX-Tx-Core1(config-if-lag-if)# mtu 9198  ICX-Tx-Core1(config)# interface 1/1/46-1/1/47ICX-Tx-Core1(config-if-vlan)# active-gateway ip 10.1.11.1 mac 02:02:00:00:01:00  ICX-Tx-Core1(config)# interface 1/1/45ICX-Tx-Core1(config-if-vlan)# active-gateway ip 192.168.0.0 mac 02:02:00:00:01:00 NEW QUESTION 20A company is implementing a new wireless design and needs it to support high availability even during times of switch system upgrades. The solution will involve Aruba Mobility Controller (MC) and Aruba AP connections requiring POE Which campus AOS-CX switch solution and virtual switching should the company implement at the campus access layer?  AOS-CX 8400 and VSX  AOS-CX 6300 and VSF  AOS-CX 6400 and VSX  AOS-CX 8325 and VSF NEW QUESTION 21An administrator wants to track what configuration changes were made on a switch What should the administrator implement to see the configuration changes on an AOS-CX switch?  VSX synchronization logging  AAA authorization  Network Analysis Engine (NAE)  AAA authentication NEW QUESTION 22A company has implemented 802.1X authentication on AOS-CX access switches, where two ClearPass servers are used to implement AAA.Each switch has the two servers defined. A network engineer notices the following command configured on the AOS-CX switches:radius-server tracking user-name monitor password plaintext aruba123What is the purpose of this configuration?  Implement replay protection for AAA messages  Define the account to implement downloadable user roles  Speed up the AAA authentication process  Define the account to implement change of authorization Radius service tracking locates the availability of the RADIUS service configured on the switch. It helps to minimize the waiting period for new clients in the unauth-vid (Guest Vlan) when authentication fails because of service is not available, as well as previously authenticated clients in unauth-vid (Guest Vlan) when re-authentication fails because service is not available during the re-authentication period. Note that this feature is disabled by default.https://techhub.hpe.com/eginfolib/networking/docs/switches/WB/16-02/5200-1650_WB_ASG/content/ch04s04.htmlNEW QUESTION 23Examine the network topology.The network is configured for OSPF with the following attributes:Here is the OSPF configuration performed on Core1:Based on the above information, what is correct?  ISP 1 is not reachable from any area.  Corel has received one type 5 LSA from the ASBR.  Area 0 has 81 routes  Area 1 has 23 routes NEW QUESTION 24Refer to the exhibit.The ACL configuration defined on Core-1 is as follows:if telnet was being used which device connection would he permitted and functional in both directions? (Select two }  Server 2 to Client 2  Client 1 to Client 2  Server 1to Client 1  Client 1 to Client 3  Client 3 to Client 2 NEW QUESTION 25Examine the AOS-CX configuration:The switches have a default factory password setting NetEdit fails to access the configuration of the AOS-CX switches. What should the administrator do to solve this problem?  Set a password for the default admin user account.  Disable telnet globally.  Use the default VRF instead of the mgmt VRF  Enable IP routing globally NEW QUESTION 26A company has just purchased AOS-CX switches. The company has a free and open-source AAA solution.The company wants to implement access control on the Ethernet ports of the AOS-CX switches.Which security features can the company implement given the equipment that they are using?  Port-based tunneling  Device fingerprinting  Local user roles  Downloadable user roles NEW QUESTION 27A network engineer is examining NAE graphs from the Dashboard but notices that the time shown in the graph does not represent the current time. The engineer verifies that the AOS-CX switch is configured for NTP and is successfully synchronized. What should be done to fix this issue?  Ensure the engineer’s web browser is configured for the same timezone as the AOS-CX switch  Ensure the engineer’s PC is synchronized to the same NTP server as the AOS-CX switch  Ensure NetEdit and the AOS-CX switch are synchronized to the same NTP server  Enable trust settings for the AOS-CX switch’s SSL certificate NEW QUESTION 28A network engineer is using NetEdit to manage AOS-CX switches. The engineer notices that a lot of third-party VoIP phonesare showing up in the NetEdit topology The engineer deletes these, but they are automatically rediscovered by NetEdit andadded back in What should the administrator do to solve this problem?  Disable SSH access on all the VoIP phones.  Disable the RESTful API on all the VoIP phones  Disable LLDP globally on the AOS-CX switches where phones are connected  Change the VoIP phone SNMP community string to something unknown by NetEdit. NEW QUESTION 29The network is configured for OSPF with the following attributes:Core1 and Core2 and ABRsArea 1 has 20 networks in the 10.1.0.0/16 rangeArea 0 has 10 networks in the 10.0.0.0/16 rangeArea 2 has 50 networks in the 10.2.0.0/16 rangeThe ASBR is importing a static route into Area 1Core2 has a summary for Area 2: area 0.0.0.2 range 10.2.0.0/16 type inter-area Here is the OSPF configuration performed on Core1:Based on the above information, what is correct?  Area 0 has 13 routes  Core1 has no OSPF routes  Core1 has received one LSA Type 5 from the ASBR  Area 1 has 23 routes NEW QUESTION 30Which concept is implemented using Aruba’s dynamic segmentation?  Root of trust  Device fingerprinting  Zero Touch Provisioning  Colorless port NEW QUESTION 31An administrator will be replacing a campus switching infrastructure with AOS-CX switches that support VSX capabilities. The campus involves a core, as well as multiple access layers. Which feature should the administrator implement to allow both VSX-capable core switches to process traffic sent to the default gateway in the campus VLANs?  VRF  VRRP  IP helper  Active gateway Active gateway = both devices route/forward traffic VRRP = Active-standbye, only active member routes/forwards traffic Understand the Active Gateway principle In a VSX system, active gateway provides redundant default gateway functionality for the end-hosts. The default gateway of the end-host is automatically handled by both the VSX systems. Loading … Download Real HP HPE6-A73 Exam Dumps Test Engine Exam Questions: https://www.test4engine.com/HPE6-A73_exam-latest-braindumps.html --------------------------------------------------- Images: https://blog.test4engine.com/wp-content/plugins/watu/loading.gif https://blog.test4engine.com/wp-content/plugins/watu/loading.gif --------------------------------------------------- --------------------------------------------------- Post date: 2023-10-14 15:15:40 Post date GMT: 2023-10-14 15:15:40 Post modified date: 2023-10-14 15:15:40 Post modified date GMT: 2023-10-14 15:15:40