[Q10-Q33] 100% Passing Guarantee - Brilliant H35-580_V2.0 Exam Questions PDF [Nov-2023] : Exam for engine : http://blog.test4engine.com

Exam for engine
https://blog.test4engine.com/2023/11/03/q10-q33-100-passing-guarantee-brilliant-h35-580_v2-0-exam-questions-pdf-nov-2023/
Export date: Mon Nov 18 2:44:48 2024 / +0000 GMT

[Q10-Q33] 100% Passing Guarantee - Brilliant H35-580_V2.0 Exam Questions PDF [Nov-2023]

100% Passing Guarantee - Brilliant H35-580_V2.0 Exam Questions PDF [Nov-2023]

H35-580_V2.0 Dumps 2023 - NewHuawei H35-580_V2.0 Exam Questions

Huawei H35-580_V2.0 is a certification exam provided by Huawei Technologies Co. Ltd. It is designed for individuals who want to validate their knowledge and skills in 5G radio network planning. HCIA-5G-RNP&RNO V2.0 certification is appropriate for network planning engineers, network architects, and network administrators who are interested in working with 5G networks.

NO.10 If AFGIobal is 15 kHz, FREF-Offs is 3000 MHz, and NREF-Offs is 600000, which of the following is the NR Absolute Radio Frequency Channel Number (NR-ARFCN) corresponding to 3300 MHz?

633000

600000

3300000

620000

NO.11 Which of the following NR system indicators is at the base station level?

PRB usage

PDCCH resource usage

User capacity usage

Paging resource usage

NO.12 In SA networking, which of the following is the first step for a UE to perform a cell search?

Obtain the cell signal quality.

Obtain other cell information.

Synchronize frames and obtain PCI group number.

Synchronize half-frames and obtain the ID within a PCI group.

Explanation
According to the 5G SA Cell Search & Network Entry Matrix, the first step for a UE to perform a cell search in SA networking is to synchronize frames and obtain PCI group number. This step involves the following sub-steps:
The UE scans the available frequency range to detect the presence of Synchronization Signal Blocks (SSBs) from different base stations. SSBs are periodic signals that contain essential synchronization and system information for cell search and initial access.
The UE selects an SSB with the strongest signal strength and decodes its Primary Synchronization Signal (PSS) and Secondary Synchronization Signal (SSS). The PSS and SSS are part of the SSB and provide coarse timing synchronization and cell identity information.
The UE uses the PSS and SSS information to synchronize its internal clock with that of the base station and obtain the Physical Cell Identity (PCI) group number. The PCI group number is a 9-bit value that identifies a group of 8 cells that share the same PSS and SSS sequences. The PCI group number ranges from 0 to 1007.
The other steps for a UE to perform a cell search in SA networking are:
Synchronize half-frames and obtain the ID within a PCI group: The UE further synchronizes its timing with the base station by decoding its Narrowband Synchronization Signal (NSSS), which is also part of the SSB. The NSSS provides more precise timing information and the ID within a PCI group, which is a
3-bit value that identifies a specific cell within a PCI group. The ID within a PCI group ranges from 0 to
7. By combining the PCI group number and the ID within a PCI group, the UE can obtain the full PCI, which is a 10-bit value that uniquely identifies a cell.
Obtain other cell information: The UE decodes other signals and channels in the SSB to acquire other cell information, such as system bandwidth, subcarrier spacing, frame structure, etc. These signals and channels include Demodulation Reference Signals (DMRS), Master Information Block (MIB), System Information Block (SIB), etc.
Obtain the cell signal quality: The UE measures the cell signal quality based on various indicators, such as Reference Signal Received Power (RSRP), Reference Signal Received Quality (RSRQ), Signal-to-Interference-plus-Noise Ratio (SINR), etc. These indicators reflect the strength, quality, and interference level of the received signal.

NO.13 What are characteristics of eCPRI links?(Select All that Apply)

They are based on the TDM mechanism.

They require dock synchronization.

They are based on the IP mechanism.

They require AAU support.

NO.14 Which of the following SI messages must be read on a 5G network?

SIB2

SIB1

SIB4

SIB3

NO.15 Which of the following factors does not need to be considered during PUSCH power calculation?

Number of PUSCH RBs

SCS configuration for the PUSCH

MCS index of the PUSCH

Number of PUSCH symbols in the time domain

NO.16 Which of the following channels/signals require demodulation reference signals (DMRSs)?(Select All that Apply)

DPBCH

DPDCCH

DPOSCH

DCSI-RS

NO.17 In order to achieve ideal coverage, what is the clearance requirement around an antenna?

1-5m

50-100m

5-10m

5000-10000m

NO.18 Which of the following statements about the space principles for 5G BBU installation are correct?(Select All that Apply)

If the installation space is insufficient, the BBU can be installed on a wall. Ensure that the wall meets the load bearing requirements.

If the space is greater than 600 mm, a cabinet can be added to install the BBU.

If the installation space is insufficient, install 5G boards directly into the existing 4G B8U.

If the remaining space of an existing cabinet is greater than 4 U, the BBU can be installed directly.

NO.19 Which of the following common messages need to be scheduled?(Select All that Apply)

Paging

RA Response

SIB

MIB

NO.20 Which of the following materials does not need to be prepared before site survey?

Local map

Site survey table

5G antenna height table

Engineering file

NO.21 In the uplink rate test for NR users, which of the following values is the recommended uplink maximum MIMO layers for 2T4R UEs?

Layer3

Layer2

Layer4

Layer1

NO.22 In SA networking, which of the following messages is used to deliver PRACH power control parameters to UEs?

SIB2

RRC reconfiguration

MIB

SIB1

NO.23 CU-DU Split of a base station means that the base station’s control plane functions and user plane functions are separated.

True

False

NO.24 Which of the following is not a typical application scenario of massive MIMO?

Suburban areas with light traffic

Large venues

High-rise buildings

Densely populated urban areas

NO.25 Which of the following protocol layers has been added to the 5G air interface protocol stack compared with
4G?

POCP

RRC

SDAP

MAC

NO.26 Which of the following counters can be measured at the board level?

CPU usage

Transmission interface measurement

Number of paging messages

CCE usage

NO.27 Slot distribution in BBU5900 is the same as that in BBU3910.

True

False

NO.28 5G can meet service requirements in scenarios with a mobility speed of up to 500 km/h.

True

False

NO.29 Which of the following protocols/data belong to Layer 3 of the Uu interface?(Select All that Apply)

MAC protocol

RLC protocol

RRC protocol

IP data

NO.30 Which of the following spectrum sharing technologies can be used in the 3.5 GHz+2.1 GHz uplink and downlink decoupling/super uplink architecture?

3.5 GHz NR and 2.1 GHz LTE share both the downlink and uplink spectrums.

2.1 GHz NR and 2.1 GHz LTE share both the downlink and uplink spectrums.

3.5 GHz NR and 2.1 GHz LTE only share the uplink spectrums.

2.1 GHz NR and 2.1 GHz LTE only share the uplink spectrums.

NO.31 Which of the following are the cause values of QoS flow setup failures?(Select All that Apply)

No response from the UE

Insufficient transmission resources

Unauthorized UE

Insufficient radio resources

NO.32 After gNodeB hardware is installed and commissioned, which of the following functions needs to be tested and verified in single site verification?

Interoperability capability

SON capability

Equipment functions and coverage capability

Call drop capability

NO.33 The UPEU in the BBU5900 needs to be connected to two circuit breakers.

True

False

Free H35-580_V2.0 braindumps download: https://www.test4engine.com/H35-580_V2.0_exam-latest-braindumps.html ¹

Links:

https://www.test4engine.com/H35-580_V2.0_exam-late st-braindumps.html

Post date: 2023-11-03 14:07:07
Post date GMT: 2023-11-03 14:07:07

Post modified date: 2023-11-03 14:07:07
Post modified date GMT: 2023-11-03 14:07:07

Export date: Mon Nov 18 2:44:48 2024 / +0000 GMT
This page was exported from Exam for engine [ http://blog.test4engine.com ]