This page was exported from Exam for engine [ http://blog.test4engine.com ] Export date:Mon Nov 18 2:27:35 2024 / +0000 GMT ___________________________________________________ Title: [Feb 28, 2024] Genuine MS-203 Exam Dumps New 2024 Microsoft Pratice Exam [Q111-Q126] --------------------------------------------------- [Feb 28, 2024] Genuine MS-203 Exam Dumps New 2024 Microsoft Pratice Exam New 2024 Realistic MS-203 Dumps Test Engine Exam Questions in here Microsoft MS-203 (Microsoft 365 Messaging) Exam is an important certification for individuals seeking to become proficient in messaging solutions in Microsoft 365. MS-203 exam validates the candidate's knowledge and skills in planning, executing, and managing messaging infrastructure in the Microsoft 365 environment. MS-203 exam covers topics such as configuring, managing, and migrating messaging, implementing and managing hybrid and secure messaging solutions, and managing compliance, governance, and security. Microsoft MS-203 exam is an ideal certification for professionals who want to demonstrate their expertise in managing messaging systems in a Microsoft 365 environment. MS-203 exam is suitable for messaging administrators, messaging engineers, and messaging architects who want to validate their skills and knowledge in the field. Passing MS-203 exam helps professionals to enhance their credibility and opens up new opportunities for career growth.   NO.111 You have a Microsoft Exchange Server 2019 organization.You have the Address Book Policies (ABP) and address lists in the following table.You have the users in the following table.You assign ABP1 to User1 and User2.User3 is NOT assigned to an Address Book Policy.For each of the following statements, select Yes if the statement is true. Otherwise, select No.NOTE: Each correct selection is worth one point. References:https://docs.microsoft.com/en-us/exchange/email-addresses-and-address-books/address-book-policies/address-book-policies?view=exchserver-2019NO.112 You have a Microsoft Exchange Online tenant.You have an on-premises scanner that emails scanned documents by using SMTP.You need to create a Microsoft Office 365 SMTP relay to route email from the scanner to the internet. The solution must ensure that the connector accepts only email sent by the scanner.How should you configure the connector? To answer, select the appropriate options in the answer area.NOTE: Each correct selection is worth one point. Reference:https://docs.microsoft.com/en-us/exchange/mail-flow-best-practices/how-to-set-up-a-multifunction-device-or-application-to-send-email-using-microsoft-365-or-office-365#option-3-configure-a-connector-to-send-mail-using-microsoft-365-or-office-365-smtp-relayNO.113 You have a Microsoft Exchange Server 2019 organization that uses an email domain named contoso.com.You plan to move several mailboxes to Microsoft 365.You need to configure hybrid mail flow to meet the following requirements:All email messages received from the internet must be filtered for spam by Microsoft 365.Your company’s on-premises firewall must allow email messages between the on-premises Exchange servers and Microsoft 365.What should you configure? To answer, select the appropriate options in the answer area.NOTE: Each correct selection is worth one point. Reference:https://docs.microsoft.com/en-us/exchange/hybrid-deployment-prerequisitesNO.114 Your company named ADatum Corporation has a Microsoft Exchange Online subscription that contains the sharing policies shown in the following table.The subscription contains the mailboxes shown in the following table.ADatum does business with the partner companies shown in the following table.For each of the following statements, select Yes if the statement is true. Otherwise, select No.NOTE: Each correct selection is worth one point. NO.115 Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.You have a Microsoft Exchange Online tenant that uses an email domain named contoso.com.You need to prevent all users from performing the following tasks:Sending out-of-office replies to an email domain named fabrikam.com.Sending automatic replies to an email domain named adatum.com.The solution must ensure that all the users can send out-of-office replies and automatic replies to other email domains on the internet.Solution: You create one mail flow rule.Does this meet the goal?  Yes  No Reference:https://docs.microsoft.com/en-us/exchange/mail-flow-best-practices/remote-domains/remote-domainsNO.116 Please wait while the virtual machine loads. Once loaded, you may proceed to the lab section. This may take a few minutes, and the wait time will not be deducted from your overall test time.When the Next button is available, click it to access the lab section. In this section, you will perform a set of tasks in a live environment. While most functionality will be available to you as it would be in a live environment, some functionality (e.g., copy and paste, ability to navigate to external websites) will not be possible by design.Scoring is based on the outcome of performing the tasks stated in the lab. In other words, it doesn’t matter how you accomplish the task, if you successfully perform it, you will earn credit for that task.Labs are not timed separately, and this exam may have more than one lab that you must complete. You can use as much time as you would like to complete each lab. But, you should manage your time appropriately to ensure that you are able to complete the lab(s) and all other sections of the exam in the time provided.Please note that once you submit your work by clicking the Next button within a lab, you will NOT be able to return to the lab.Use the following login credentials as needed:To enter your username, place your cursor in the Sign in box and click on the username below.To enter your password, place your cursor in the Enter password box and click on the password below.Microsoft 365 Username: admin@abc.comMicrosoft 365 Password: xxxxxxIf the Microsoft 365 portal does not load successfully in the browser, press CTRL-K to reload the portal in a new browser tab.The following information is for technical support purposes only.Lab Instance: XXXXXXYou need to ensure that all emails sent from the users in your company to recipients who use a suffix of @fabnkam.com are encrypted by using Microsoft Office 365 Message Encryption (OME).To complete this task, sign in to the Exchange admin center. In the Microsoft 365 admin center, choose Admin centers > Exchange.In the EAC, go to Mail flow > Rules and select New + > Create a new rule.In Name, type a name for the rule, such as Encrypt mail for DrToniRamos@hotmail.com.In Apply this rule if, select a condition, and enter a value if necessary. For example, to encrypt messages going to DrToniRamos@hotmail.com:– To select an existing name, select it from the list and then click OK.– To enter a new name, type an email address in the check names box and then select check names > OK.To add more conditions, choose More options and then choose add condition and select from the list.For example, to apply the rule only if the recipient is outside your organization, select add condition and then select The recipient is external/internal > Outside the organization > OK.To enable encryption using the new OME capabilities, from Do the following, select Modify the message security and then choose Apply Office 365 Message Encryption and rights protection. Select an RMS template from the list, choose Save, and then choose OK.Reference:https://docs.microsoft.com/en-us/microsoft-365/compliance/define-mail-flow-rules-to-encrypt-email?view=o365-worldwideNO.117 You have a Microsoft Exchange Online tenant.You need to be notified when more than 1,000 email messages are queued in Exchange for more than one hour.What should you do? To answer, select the appropriate options in the answer area.NOTE: Each correct selection is worth one point. ExplanationNO.118 Please wait while the virtual machine loads. Once loaded, you may proceed to the lab section. This may take a few minutes, and the wait time will not be deducted from your overall test time.When the Next button is available, click it to access the lab section. In this section, you will perform a set of tasks in a live environment. While most functionality will be available to you as it would be in a live environment, some functionality (e.g., copy and paste, ability to navigate to external websites) will not be possible by design.Scoring is based on the outcome of performing the tasks stated in the lab. In other words, it doesn’t matter how you accomplish the task, if you successfully perform it, you will earn credit for that task.Labs are not timed separately, and this exam may have more than one lab that you must complete. You can use as much time as you would like to complete each lab. But, you should manage your time appropriately to ensure that you are able to complete the lab(s) and all other sections of the exam in the time provided.Please note that once you submit your work by clicking the Next button within a lab, you will NOT be able to return to the lab.Use the following login credentials as needed:To enter your username, place your cursor in the Sign in box and click on the username below.To enter your password, place your cursor in the Enter password box and click on the password below.Microsoft 365 Username: admin@abc.comMicrosoft 365 Password: xxxxxxIf the Microsoft 365 portal does not load successfully in the browser, press CTRL-K to reload the portal in a new browser tab.The following information is for technical support purposes only.Lab Instance: XXXXXXAnother administrator at contoso.com plans to deploy an SMTP smart host that uses an IP address of 131.107.2.200.You need to prepare a solution to route all emails sent to users in the @contoso.com domain from your organization by using the SMTP host. The solution must have a status set to Off until the administrator deploys the smart host.To complete this task, sign in to the Exchange admin center. In the EAC, navigate to Mail flow > Send connectors, and then click Add +. This starts the New Send connector wizard.On the first page, enter the following information:– Name: Enter a descriptive name for the Send connector, for example, Smart host to Internet.– Type: Select a descriptive value. For example, Internet or Custom.When you’re finished, click Next.On the next page, select Route mail through smart hosts, and then click Add +. In the Add smart host dialog box that appears, identify the smart host by using one of the following values:– IP address: For example, 192.168.3.2.– Fully qualified domain name (FQDN): For example, securitydevice01.contoso.com. Note that the Exchange source servers for the Send connector must be able to resolve the smart host in DNS by using this FQDN.When you’re finished, click Save.You can enter multiple smart hosts by repeating Step 3. When you’re finished, click Next.On the next page, in the Route mail through smart hosts section, select the authentication method that’s required by the smart host. Valid values are:When you’re finished, click Next.On the next page, in the Address space section, click Add +. In the Add domain dialog box that appears, enter the following information:– Type: Verify SMTP is entered.– Fully Qualified Domain Name (FQDN): Enter an asterisk (*) to indicate the Send connector applies to messages addressed to all external domains. Alternatively, you can enter a specific external domain (for example, contoso.com), or a domain and all subdomains (for example, *.contoso.com).– Cost: Verify 1 is entered. A lower value indicates a more preferred route for the domains you specified.When you’re finished, click Save.Back on the previous page, the Scoped send connector setting is important if your organization has Exchange servers installed in multiple Active Directory sites:– If you don’t select Scoped send connector, the connector is usable by all transport servers (Exchange 2013 or later Mailbox servers and Exchange 2010 Hub Transport servers) in the entire Active Directory forest. This is the default value.– If you select Scoped send connector, the connector is only usable by other transport servers in the same Active Directory site.When you’re finished, click Next.On the next page, in the Source server section, click Add +. In the Select a Server dialog box that appears, select one or more Mailbox servers that you want to use to send outbound mail to the smart host. If you have multiple Mailbox servers in your environment, select the ones that can route mail to the smart host. If you have only one Mailbox server, select that one. After you’ve selected at least one Mailbox server, click Add, click OK, and then click Finish.After you create the Send connector, it appears in the Send connector list.From the Send connector list, you can turn the connector on or off.Reference:https://docs.microsoft.com/en-us/exchange/mail-flow/connectors/outbound-smart-host-routing?view=exchserver-2019#how-do-you-know-this-workedNO.119 How many default policy tags (DPTs), retention policy tags (RPTs), and personal tags should you create to meet the retention requirements? To answer, select the appropriate options in the answer area.NOTE: Each correct selection is worth one point. Reference:https://docs.microsoft.com/en-us/exchange/security-and-compliance/messaging-records-management/retention-tags-and-policiesNO.120 Please wait while the virtual machine loads. Once loaded, you may proceed to the lab section. This may take a few minutes, and the wait time will not be deducted from your overall test time.When the Next button is available, click it to access the lab section. In this section, you will perform a set of tasks in a live environment. While most functionality will be available to you as it would be in a live environment, some functionality (e.g., copy and paste, ability to navigate to external websites) will not be possible by design.Scoring is based on the outcome of performing the tasks stated in the lab. In other words, it doesn’t matter how you accomplish the task, if you successfully perform it, you will earn credit for that task.Labs are not timed separately, and this exam may have more than one lab that you must complete. You can use as much time as you would like to complete each lab. But, you should manage your time appropriately to ensure that you are able to complete the lab(s) and all other sections of the exam in the time provided.Please note that once you submit your work by clicking the Next button within a lab, you will NOT be able to return to the lab.Use the following login credentials as needed:To enter your username, place your cursor in the Sign in box and click on the username below.To enter your password, place your cursor in the Enter password box and click on the password below.Microsoft 365 Username: admin@abc.comMicrosoft 365 Password: xxxxxxIf the Microsoft 365 portal does not load successfully in the browser, press CTRL-K to reload the portal in a new browser tab.The following information is for technical support purposes only.Lab Instance: XXXXXXYou need to prevent email messages that contain attachments that have the .js file extension from being delivered to any recipients in your organization.To complete this task, sign in to the Microsoft 365 admin center. See explanation below.ExplanationGo to Mail flow > Rules.Create the rule by using one of the following options:– To create a rule from a template, click– To copy a rule, select the rule, and then select– To create a new rule from scratch,In the New rule dialog box, name the rule, and then select the conditions and actions for this rule:– In Apply this rule if…, select the condition you want from the list of available conditions:Some conditions require you to specify values. For example, if you select The sender is… condition, you must specify a sender address. If you’re adding a word or phrase, note that trailing spaces are not allowed.If the condition you want isn’t listed, or if you need to add exceptions, select More options. Additional conditions and exceptions will be listed.If you don’t want to specify a condition, and want this rule to apply to every message in your organization, select [Apply to all messages] condition.– In Do the following…, select the action you want the rule to take on messages matching the criteria from the list of available actions:Some of the actions will require you to specify values. For example, if you select the Forward the message for approval to… condition, you will need to select a recipient in your organization.If the condition you want isn’t listed, select More options. Additional conditions will be listed.– Specify how rule match data for this rule is displayed in the Data Loss Prevention (DLP) reports and the Mail protection reports.– Set the mode for the rule. You can use one of the two test modes to test the rule without impacting mail flow.In both test modes, when the conditions are met, an entry is added to the message trace:Enforce: This turns on the rule and it starts processing messages immediately. All actions on the rule will be performed.Test with Policy Tips: This turns on the rule, and any Policy Tip actions ( Notify the sender with a Policy Tip) will be sent, but no actions related to message delivery will be performed. Data Loss Prevention (DLP) is required in order to use this mode.Test without Policy Tips: Only the Generate incident report action will be enforced. No actions related to message delivery are performed.Exchange Online admins can create mail flow rules in the Exchange admin center (EAC) at Mail flow > Rules. You need permissions to do this procedure. After you start to create a new rule, you can see the full list of attachment-related conditions by clicking under Apply this rule if. The attachment-related options are shown in the following diagram.Graphical user interface, application Description automatically generated with medium confidenceReference:https://docs.microsoft.com/en-us/exchange/security-and-compliance/mail-flow-rules/manage-mail-flow-ruleshttps://docs.microsoft.com/en-us/exchange/security-and-compliance/mail-flow-rules/inspect-message-attachmenNO.121 You have a Microsoft Exchange Online tenant.You plan to place a hold on all email messages stored in the mailbox of a user named User1.What should you create first?  an eDiscovery case  sensitive info type  a data loss prevention (DLP) policy  an information barrier segment ExplanationYou can use an eDiscovery case to create and manage eDiscovery holds that can be applied to user mailboxes and other content locations in Microsoft Purview1. You can also use an eDiscovery case to search for and export content from mailboxes and other locations1.An eDiscovery case is different from a Litigation Hold, which is a hold that is applied to user mailboxes in Exchange Online1. A Litigation Hold isn’t identified by a GUID A sensitive info type is a predefined or custom entity that can be used to identify and protect sensitive data in Microsoft Purview2. It is not related to placing a hold on email messages.A data loss prevention (DLP) policy is a policy that helps prevent the accidental or intentional sharing of sensitive information outside your organization . It is not related to placing a hold on email messages.An information barrier segment is a group of users who are allowed or blocked from communicating with each other in Microsoft Teams or SharePoint Online . It is not related to placing a hold on email messages.NO.122 You have a Microsoft Exchange Online tenant.From the Exchange admin center, you create an alert policy named Policy1 as shown in the following exhibit.You need to recreate Policy1 to ensure that admin@contoso.com receives an email alert each time a new user configures external forwarding.Which policy settings should you configure? To answer, drag the appropriate settings to the correct requirements. Each setting may be used once, more than once, or not at all. You may need to drag the split bar between panes or scroll to view content.NOTE: Each correct selection is worth one point. NO.123 You run the Get-WebServicesVirtualDirectory cmdlet as shown in the following exhibit.Use the drop-down menus to select the answer choice that answers each question based on the information presented in the graphic.NOTE: Each correct selection is worth one point. Reference:https://docs.microsoft.com/en-us/Exchange/architecture/mailbox-servers/mrs-proxy-endpoint?view=exchserver-2019NO.124 You have two mailboxes named Mailbox1 and Mailbox2 that have the ProhibitSendReceiveQuota parameter set to 50 GB.From a Microsoft Exchange Online tenant, you run the following PowerShell command.You receive the license status of each mailbox and discover the configurations shown in the following table.You need to increase the quota for Mailbox1 and Mailbox2.What should you do first?  Assign a license to each mailbox.  Convert each mailbox into an equipment mailbox.  Enable an archive for each mailbox.  Place both mailboxes on retention hold. Shared and resource mailboxes don’t require a license. However, without a license, these mailboxes are limited to 50 GB. To increase the mailbox size, an E3 or E5 license must be assigned. This will increase the mailbox to 100 GB.Reference:https://docs.microsoft.com/en-us/office365/servicedescriptions/exchange-online-service-description/exchange-online-limitsNO.125 You have a Microsoft Exchange Online tenant.You need to create a report to display messages that have a delivery status of Quarantined.From the modern Exchange admin center, you create a new message trace.How should you configure the message trace? To answer, select the appropriate options in the answer area.NOTE: Each correct selection is worth one point. Reference:https://docs.microsoft.com/en-us/exchange/monitoring/trace-an-email-message/run-a-message-trace-and-view-resultshttps://docs.microsoft.com/en-us/exchange/monitoring/trace-an-email-message/message-trace-modern-eacNO.126 You have a Microsoft Exchange Online tenant.You have an on-premises scanner that emails scanned documents by using SMTP.You need to create a Microsoft Office 365 SMTP relay to route email from the scanner to the internet. The solution must ensure that the connector accepts only email sent by the scanner.How should you configure the connector? To answer, select the appropriate options in the answer area.NOTE: Each correct selection is worth one point. ExplanationGraphical user interface, application Description automatically generatedReference:https://docs.microsoft.com/en-us/exchange/mail-flow-best-practices/how-to-set-up-a-multifunction-device-or-ap Loading … Grab latest Amazon MS-203 Dumps as PDF Updated: https://www.test4engine.com/MS-203_exam-latest-braindumps.html --------------------------------------------------- Images: https://blog.test4engine.com/wp-content/plugins/watu/loading.gif https://blog.test4engine.com/wp-content/plugins/watu/loading.gif --------------------------------------------------- --------------------------------------------------- Post date: 2024-02-28 10:12:01 Post date GMT: 2024-02-28 10:12:01 Post modified date: 2024-02-28 10:12:01 Post modified date GMT: 2024-02-28 10:12:01