This page was exported from Exam for engine [ http://blog.test4engine.com ] Export date:Mon Nov 18 2:49:26 2024 / +0000 GMT ___________________________________________________ Title: 2024 New NSE7_EFW-7.0 Dumps - Real Fortinet Exam Questions [Q36-Q53] --------------------------------------------------- 2024 New NSE7_EFW-7.0 Dumps - Real Fortinet Exam Questions Dependable NSE7_EFW-7.0 Exam Dumps to Become Fortinet Certified NO.36 A FortiGate device has the following LDAP configuration:The administrator executed the ‘dsquery’ command in the Windows LDAp server 10.0.1.10, and got the following output:>dsquery user -samid administrator“CN=Administrator, CN=Users, DC=trainingAD, DC=training, DC=lab”Based on the output, what FortiGate LDAP setting is configured incorrectly?  cnid.  username.  password.  dn. NO.37 Refer to the exhibit, which contains the partial output of the get vpn ipsec tunnel details command.Based on the output, which two statements are correct? (Choose two.)  The npu_flag for this tunnel is 03.  Different SPI values are a result of auto-negotiation being disabled for phase 2 selectors.  Anti-replay is enabled.  The npu_flag for this tunnel is 02. NO.38 Examine the IPsec configuration shown in the exhibit; then answer the question below.An administrator wants to monitor the VPN by enabling the IKE real time debug using these commands:diagnose vpn ike log-filter src-addr4 10.0.10.1diagnose debug application ike -1diagnose debug enableThe VPN is currently up, there is no traffic crossing the tunnel and DPD packets are being interchanged between both IPsec gateways. However, the IKE real time debug does NOT show any output. Why isn’t there any output?  The IKE real time shows the phases 1 and 2 negotiations only. It does not show any more output once the tunnel is up.  The log-filter setting is set incorrectly. The VPN’s traffic does not match this filter.  The IKE real time debug shows the phase 1 negotiation only. For information after that, the administrator must use the IPsec real time debug instead: diagnose debug application ipsec -1.  The IKE real time debug shows error messages only. If it does not provide any output, it indicates that the tunnel is operating normally. NO.39 An administrator cannot connect to the GIU of a FortiGate unit with the IP address 10.0.1.254. The administrator runs the debug flow while attempting the connection using HTTP.The output of the debug flow is shown in the exhibit:Based on the error displayed by the debug flow, which are valid reasons for this problem? (Choose two.)  HTTP administrative access is disabled in the FortiGate interface with the IP address 10.0.1.254.  Redirection of HTTP to HTTPS administrative access is disabled.  HTTP administrative access is configured with a port number different than 80.  The packet is denied because of reverse path forwarding check. NO.40 View the global IPS configuration, and then answer the question below.Which of the following statements is true regarding this configuration?  IPS will scan every byte in every session.  FortiGate will spawn IPS engine instances based on the system load.  New packets will be passed through without inspection if the IPS socket buffer runs out of memory.  IPS will use the faster matching algorithm which is only available for units with more than 4 GB memory. NO.41 An administrator has configured a dial-up IPsec VPN with one phase 2, extended authentication (XAuth) and IKE mode configuration.The administrator has also enabled the IKE real time debug:diagnose debug application ike-1diagnose debug enableIn which order is each step and phase displayed in the debug output each time a new dial-up user is connecting to the VPN?  Phase1; IKE mode configuration; XAuth; phase 2.  Phase1; XAuth; IKE mode configuration; phase2.  Phase1; XAuth; phase 2; IKE mode configuration.  Phase1; IKE mode configuration; phase 2; XAuth. NO.42 Examine the following routing table and BGP configuration; then answer the question below.TheBGP connection is up, but the local peer is NOT advertising the prefix 192.168.1.0/24 .Which configuration change will make the local peer advertise this prefix?  Enable the redistribution of connected routers into BGP.  Enable the redistribution of static routers into BGP.  Disable the setting network-import-check.  Enable the setting ebgp-multipath. NO.43 View the exhibit, which contains the output of a diagnose command, and the answer the question below.Which statements are true regarding the Weight value?  Its initial value is calculated based on the round trip delay (RTT).  Its initial value is statically set to 10.  Its value is incremented with each packet lost.  It determines which FortiGuard server is used for license validation. NO.44 Refer to the exhibit, which contains a TCL script configuration on FortiManager.An administrator has configured the TCL script on FortiManager, but failed to apply any changes to the managed device after being executed.Why did the TCL script fail to make any changes to the managed device?  Changes in an interface configuration can only be done by CLI script.  The TCL script must start with #include <>.  Incomplete commands are ignored in TCL scripts.  The TCL command run_cmd has not been created. NO.45 Examine the partial output from two web filter debug commands; then answer the question below:Based on the above outputs, which is the FortiGuard web filter category for the web site www.fgt99.com?  Finance and banking  General organization.  Business.  Information technology. NO.46 View the exhibit, which contains the output of a BGP debug command, and then answer the question below.Which of the following statements about the exhibit are true? (Choose two.)  For the peer 10.125.0.60, the BGP state of is Established.  The local BGP peer has received a total of three BGP prefixes.  Since the BGP counters were last reset, the BGP peer 10.200.3.1 has never been down.  The local BGP peer has not established a TCP session to the BGP peer 10.200.3.1. NO.47 View the exhibit, which contains the output of a diagnose command, and then answer the question below.What statements are correct regarding the output? (Choose two.)  This is an expected session created by a session helper.  Traffic in the original direction (coming from the IP address 10.171.122.38) will be routed to the next-hop IP address 10.0.1.10.  Traffic in the original direction (coming from the IP address 10.171.122.38) will be routed to the next-hop IP address 10.200.1.1.  This is an expected session created by an application control profile. NO.48 An administrator wants to capture ESP traffic between two FortiGates using the built-in sniffer.If the administrator knows that there is no NAT device located between both FortiGates, what command should the administrator execute?  diagnose sniffer packet any ‘udp port 500’  diagnose sniffer packet any ‘udp port 4500’  diagnose sniffer packet any ‘esp’  diagnose sniffer packet any ‘udp port 500 or udp port 4500’ NO.49 An administrator has decreased all the TCP session timers to optimize the FortiGate memory usage. However, after the changes, one network application started to have problems. During the troubleshooting, the administrator noticed that the FortiGate deletes the sessions after the clients send the SYN packets, and before the arrival of the SYN/ACKs. When the SYN/ACK packets arrive to the FortiGate, the unit has already deleted the respective sessions .Which TCP session timer must be increased to fix this problem?  TCP half open.  TCP half close.  TCP time wait.  TCP session time to live. NO.50 View the exhibit, which contains the output of a BGP debug command, and then answer the question below.Which of the following statements about the exhibit are true? (Choose two.)  The local router’s BGP state is Established with the 10.125.0.60 peer.  Since the counters were last reset; the 10.200.3.1 peer has never been down.  The local router has received a total of three BGP prefixes from all peers.  The local router has not established a TCP session with 100.64.3.1. NO.51 Examine the output of the ‘diagnose sys session list expectation’ command shown in the exhibit; than answer the question below.Which statement is true regarding the session in the exhibit?  It was created by the FortiGate kernel to allow push updates from FotiGuard.  It is for management traffic terminating at the FortiGate.  It is for traffic originated from the FortiGate.  It was created by a session helper or ALG. NO.52 View the exhibit, which contains a screenshot of some phase-1 settings, and then answer the question below.The VPN is up, and DPD packets are being exchanged between both IPsec gateways; however, traffic cannot pass through the tunnel.To diagnose, the administrator enters these CLI commands:However, the IKE real time debug does not show any output .Why ?  The debug output shows phases 1 and 2 negotiations only. Once the tunnel is up, it does not show any more output.  The log-filter setting was set incorrectly. The VPN’s traffic does not match this filter.  The debug shows only error messages. If there is no output, then the tunnel is operating normally.  The debug output shows phase 1 negotiation only. After that, the administrator must enable the following real time debug: diagnose debug application ipsec -1. NO.53 Examine the output of the ‘get router info bgp summary’ command shown in the exhibit; then answer the question below.Which statement can explain why the state of the remote BGP peer 10.200.3.1 is Connect?  The local peer is receiving the BGP keepalives from the remote peer but it has not received any BGP prefix yet.  The TCP session for the BGP connection to 10.200.3.1 is down.  The local peer has received the BGP prefixed from the remote peer.  The local peer is receiving the BGP keepalives from the remote peer but it has not received the OpenConfirm yet.  Loading … Get Ready with NSE7_EFW-7.0 Exam Dumps (2024): https://www.test4engine.com/NSE7_EFW-7.0_exam-latest-braindumps.html --------------------------------------------------- Images: https://blog.test4engine.com/wp-content/plugins/watu/loading.gif https://blog.test4engine.com/wp-content/plugins/watu/loading.gif --------------------------------------------------- --------------------------------------------------- Post date: 2024-03-05 12:05:49 Post date GMT: 2024-03-05 12:05:49 Post modified date: 2024-03-05 12:05:49 Post modified date GMT: 2024-03-05 12:05:49