This page was exported from Exam for engine [ http://blog.test4engine.com ] Export date:Mon Nov 18 2:52:01 2024 / +0000 GMT ___________________________________________________ Title: [Q14-Q29] ECCouncil 212-82 Dumps Updated [Jun-2024] Get 100% Real Exam Questions! --------------------------------------------------- [Jun-2024] Pass ECCouncil 212-82 Exam in First Attempt Guaranteed! Full 212-82 Practice Test and 104 unique questions with explanations waiting just for you, get it now! QUESTION 14An organization’s risk management team identified the risk of natural disasters in the organization’s current location. Because natural disasters cannot be prevented using security controls, the team suggested to build a new office in another location to eliminate the identified risk. Identify the risk treatment option suggested by the risk management team in this scenario.  Risk modification  Risk avoidance  Risk sharing  Risk retention Risk avoidance is the risk treatment option suggested by the risk management team in this scenario. Risk avoidance is a risk treatment option that involves eliminating the identified risk by changing the scope, requirements, or objectives of the project or activity. Risk avoidance can be used when the risk cannot be prevented using security controls or when the risk outweighs the benefits2. Reference: Risk AvoidanceQUESTION 15A startup firm contains various devices connected to a wireless network across the floor. An AP with Internet connectivity is placed in a corner to allow wireless communication between devices. To support new devices connected to the network beyond the APS range, an administrator used a network device that extended the signals of the wireless AP and transmitted it to uncovered area, identify the network component employed by the administrator to extend signals in this scenario.  Wireless repeater  Wireless bridge  wireless modem  Wireless router Wireless repeater is the network component employed by the administrator to extend signals in this scenario. A wireless network is a type of network that uses radio waves or infrared signals to transmit data between devices without using cables or wires. A wireless network can consist of various components, such as wireless access points (APs), wireless routers, wireless adapters, wireless bridges, wireless repeaters, etc. A wireless repeater is a network component that extends the range or coverage of a wireless signal by receiving it from an AP or another repeater and retransmitting it to another area . A wireless repeater can be used to support new devices connected to the network beyond the AP’s range . In the scenario, a startup firm contains various devices connected to a wireless network across the floor. An AP with internet connectivity is placed in a corner to allow wireless communication between devices. To support new devices connected to the network beyond the AP’s range, an administrator used a network component that extended the signals of the wireless AP and transmitted it to the uncovered area. This means that he used a wireless repeater for this purpose. A wireless bridge is a network component that connects two or more wired or wireless networks or segments together . A wireless bridge can be used to expand the network or share resources between networks . A wireless modem is a network component that modulates and demodulates wireless signals to enable data transmission over a network . A wireless modem can be used to provide internet access to devices via a cellular network or a satellite network . A wireless router is a network component that performs the functions of both a wireless AP and a router . A wireless router can be used to create a wireless network and connect it to another network, such as the internetQUESTION 16Myles, a security professional at an organization, provided laptops for all the employees to carry out the business processes from remote locations. While installing necessary applications required for the business, Myles has also installed antivirus software on each laptop following the company’s policy to detect and protect the machines from external malicious events over the Internet.Identify the PCI-DSS requirement followed by Myles in the above scenario.  PCI-DSS requirement no 1.3.2  PCI-DSS requirement no 1.3.5  PCI-DSS requirement no 5.1  PCI-DSS requirement no 1.3.1 QUESTION 17Elliott, a security professional, was tasked with implementing and deploying firewalls in the corporate network of an organization. After planning and deploying firewalls in the network, Elliott monitored the firewall logs to detect evolving threats And attacks; this helped in ensuring firewall security and addressing network issues beforehand.in which of the following phases of firewall implementation and deployment did Elliott monitor the firewall logs?  Deploying  Managing and maintaining  Testing  Configuring Managing and maintaining is the phase of firewall implementation and deployment in which Elliott monitored the firewall logs in the above scenario. A firewall is a system or device that controls and filters the incoming and outgoing traffic between different networks or systems based on predefined rules or policies. A firewall can be used to protect a network or system from unauthorized access, use, disclosure, modification, or destruction . Firewall implementation and deployment is a process that involves planning, installing, configuring, testing, managing, and maintaining firewalls in a network or system . Managing and maintaining is the phase of firewall implementation and deployment that involves monitoring and reviewing the performance and effectiveness of firewalls over time . Managing and maintaining can include tasks such as updating firewall rules or policies, analyzing firewall logs , detecting evolving threats or attacks , ensuring firewall security , addressing network issues , etc. In the scenario, Elliott was tasked with implementing and deploying firewalls in the corporate network of an organization. After planning and deploying firewalls in the network, Elliott monitored the firewall logs to detect evolving threats and attacks; this helped in ensuring firewall security and addressing network issues beforehand. This means that he performed managing and maintaining phase for this purpose. Deploying is the phase of firewall implementation and deployment that involves installing and activating firewalls in the network or system according to the plan. Testing is the phase of firewall implementation and deployment that involves verifying and validating the functionality and security of firewalls before putting them into operation. Configuring is the phase of firewall implementation and deployment that involves setting up and customizing firewalls according to the requirements and specifications.QUESTION 18Rickson, a security professional at an organization, was instructed to establish short-range communication between devices within a range of 10 cm. For this purpose, he used a mobile connection method that employs electromagnetic induction to enable communication between devices. The mobile connection method selected by Rickson can also read RFID tags and establish Bluetooth connections with nearby devices to exchange information such as images and contact lists.Which of the following mobile connection methods has Rickson used in above scenario?  NFC  Satcom  Cellular communication  ANT NFC (Near Field Communication) is the mobile connection method that Rickson has used in the above scenario. NFC is a short-range wireless communication technology that enables devices to exchange data within a range of 10 cm. NFC employs electromagnetic induction to create a radio frequency field between two devices. NFC can also read RFID tags and establish Bluetooth connections with nearby devices to exchange information such as images and contact lists . Satcom (Satellite Communication) is a mobile connection method that uses satellites orbiting the earth to provide communication services over long distances. Cellular communication is a mobile connection method that uses cellular networks to provide voice and data services over wireless devices. ANT is a low-power wireless communication technology that enables devices to create personal area networks and exchange data over short distances.QUESTION 19Identify a machine in the network with 5SH service enabled. Initiate an SSH Connection to the machine, find the file, ttag.txt. in the machine, and enter the tile’s content as the answer. The credentials tor SSH login are sam/adm(admin@123. {Practical Question)  sam@bob  bob2@sam  sam2@bob  bobt@sam bob1@sam is the file’s content as the answer. To find the machine with SSH service enabled, one can use a network scanning tool such as Nmap to scan the network for port 22, which is the default port for SSH. For example, the command nmap -p 22 192.168.0.0/24 will scan the network range 192.168.0.0/24 for port 22 and display the results2. To initiate an SSH connection to the machine, one can use a command-line tool such as ssh or an SSH client such as PuTTY to connect to the machine using the credentials sam/admin@123. For example, the command ssh sam@192.168.0.10 will connect to the machine with IP address 192.168.0.10 using the username sam and prompt for the password admin@1233. To find the file flag.txt in the machine, one can use a file searching tool such as find or locate to search for the file name in the machine’s file system. For example, the command find / -name flag.txt will search for the file flag.txt from the root directory (/) and display its location4. To enter the file’s content as the answer, one can use a file viewing tool such as cat or less to display the content of the file flag.txt. For example, the command cat /home/sam/flag.txt will display the content of the file flag.txt located in /home/sam/ directory5. The screenshot below shows an example of performing these steps: ![Screenshot of performing these steps] Reference: Nmap Tutorial, SSH Tutorial, Find Command Tutorial, Cat Command Tutorial, [Screenshot of performing these steps]QUESTION 20Rhett, a security professional at an organization, was instructed to deploy an IDS solution on their corporate network to defend against evolving threats. For this purpose, Rhett selected an IDS solution that first creates models for possible intrusions and then compares these models with incoming events to make detection decisions.Identify the detection method employed by the IDS solution in the above scenario.  Not-use detection  Protocol anomaly detection  Anomaly detection  Signature recognition QUESTION 21Paul, a computer user, has shared information with his colleague using an online application. The online application used by Paul has been incorporated with the latest encryption mechanism. This mechanism encrypts data by using a sequence of photons that have a spinning trait while traveling from one end to another, and these photons keep changing their shapes during their course through filters: vertical, horizontal, forward slash, and backslash.Identify the encryption mechanism demonstrated in the above scenario.  Quantum cryptography  Homomorphic encryption  Rivest Shamir Adleman encryption  Elliptic curve cryptography Quantum cryptography is the encryption mechanism demonstrated in the above scenario. Quantum cryptography is a branch of cryptography that uses quantum physics to secure data transmission and communication. Quantum cryptography encrypts data by using a sequence of photons that have a spinning trait, called polarization, while traveling from one end to another. These photons keep changing their shapes, called states, during their course through filters: vertical, horizontal, forward slash, and backslash. Quantum cryptography ensures that any attempt to intercept or tamper with the data will alter the quantum states of the photons and be detected by the sender and receiver . Homomorphic encryption is a type of encryption that allows computations to be performed on encrypted data without decrypting it first. Rivest Shamir Adleman (RSA) encryption is a type of asymmetric encryption that uses two keys, public and private, to encrypt and decrypt data. Elliptic curve cryptography (ECC) is a type of asymmetric encryption that uses mathematical curves to generate keys and perform encryption and decryption.QUESTION 22Lorenzo, a security professional in an MNC, was instructed to establish centralized authentication, authorization, and accounting for remote-access servers. For this purpose, he implemented a protocol that is based on the client-server model and works at the transport layer of the OSI model.Identify the remote authentication protocol employed by Lorenzo in the above scenario.  SNMPv3  RADIUS  POP3S  IMAPS QUESTION 23Juan, a safety officer at an organization, installed a physical lock at the entrance of each floor. All employees in the organization were allotted a smart card embedded in their ID cards, which had to be swiped to unlock doors and Access any floor. Which of the following types of physical locks did Juan install In this scenario?  Mechanical locks  Digital locks  Combination locks  Electromagnetic locks Digital locks are the types of physical locks that Juan installed in this scenario. A physical lock is a device that prevents or restricts access to a physical location or environment, such as a door, a cabinet, a drawer, etc. A physical lock can have different types based on its mechanism or technology. A digital lock is a type of physical lock that uses electronic or digital components, such as a keypad, a card reader, a fingerprint scanner, etc., to unlock or lock . A digital lock can be used to provide enhanced security and convenience to users, but it can also be vulnerable to hacking or tampering. In the scenario, Juan installed a physical lock at the entrance of each floor. All employees in the organization were allotted a smart card embedded in their ID cards, which had to be swiped to unlock doors and access any floor. This means that he installed digital locks for those doors. A mechanical lock is a type of physical lock that uses mechanical components, such as a key, a bolt, a latch, etc., to unlock or lock. A combination lock is a type of physical lock that uses a sequence of numbers or symbols, such as a dial, a wheel, or a keypad, to unlock or lock. An electromagnetic lock is a type of physical lock that uses an electromagnet and an armature plate to unlock or lock.QUESTION 24A web application, www.moviescope.com. hosted on your tarqet web server is vulnerable to SQL injection attacks. Exploit the web application and extract the user credentials from the moviescope database. Identify the UID (user ID) of a user, John, in the database. Note: Vou have an account on the web application, and your credentials are samAest.(Practical Question)  3  4  2  5 4 is the UID (user ID) of a user, John, in the database in the above scenario. A web application is a software application that runs on a web server and can be accessed by users through a web browser. A web application can be vulnerable to SQL injection attacks, which are a type of web application attack that exploit a vulnerability in a web application that allows an attacker to inject malicious SQL statements into an input field, such as a username or password field, and execute them on the database server. SQL injection can be used to bypass authentication, access or modify sensitive data, execute commands, etc. To exploit the web application and extract the user credentials from the moviescope database, one has to follow these steps:Open a web browser and type www.moviescope.comPress Enter key to access the web application.Enter sam as username and test as password.Click on Login button.Observe that a welcome message with username sam is displayed.Click on Logout button.Enter sam’ or ‘1’=’1 as username and test as password.Click on Login button.Observe that a welcome message with username admin is displayed, indicating that SQL injection was successful.Click on Logout button.Enter sam’; SELECT * FROM users; – as username and test as password.Click on Login button.Observe that an error message with user credentials from users table is displayed.The user credentials from users table are:The UID that is mapped to user john is 4QUESTION 25Bob was recently hired by a medical company after it experienced a major cyber security breach. Many patients are complaining that their personal medical records are fully exposed on the Internet and someone can find them with a simple Google search. Bob’s boss is very worried because of regulations that protect those dat a. Which of the following regulations is mostly violated?  HIPPA/PHl  Pll  PCIDSS  ISO 2002 QUESTION 26Leilani, a network specialist at an organization, employed Wireshark for observing network traffic. Leilani navigated to the Wireshark menu icon that contains items to manipulate, display and apply filters, enable, or disable the dissection of protocols, and configure user-specified decodes.Identify the Wireshark menu Leilani has navigated in the above scenario.  Statistics  Capture  Main toolbar  Analyze QUESTION 27Giovanni, a system administrator, was tasked with configuring permissions for employees working on a new project. Hit organization used active directories (ADs) to grant/deny permissions to resources Giovanni created a folder for AD users with the required permissions and added all employees working on the new project in it. Identify the type of account created by Giovanni in this scenario.  Third-party account  Croup-based account  Shared account  Application account Group-based account is the type of account created by Giovanni in this scenario. An account is a set of credentials, such as a username and a password, that allows a user to access a system or network. An account can have different types based on its purpose or usage. A group-based account is a type of account that allows multiple users to access a system or network with the same credentials and permissions. A group-based account can be used to simplify the management of users and resources by assigning them to groups based on their roles or functions. In the scenario, Giovanni was tasked with configuring permissions for employees working on a new project. His organization used active directories (ADs) to grant/deny permissions to resources. Giovanni created a folder for AD users with the required permissions and added all employees working on the new project in it. This means that he created a group-based account for those employees. A third-party account is a type of account that allows an external entity or service to access a system or network with limited permissions or scope. A shared account is a type of account that allows multiple users to access a system or network with the same credentials but different permissions. An application account is a type of account that allows an application or software to access a system or network with specific permissions or functions.QUESTION 28A web application www.movieabc.com was found to be prone to SQL injection attack. You are given a task to exploit the web application and fetch the user credentials. Select the UID which is mapped to user john in the database table.Note:Username: samPass: test  5  3  2  4 4 is the UID that is mapped to user john in the database table in the above scenario. SQL injection is a type of web application attack that exploits a vulnerability in a web application that allows an attacker to inject malicious SQL statements into an input field, such as a username or password field, and execute them on the database server. SQL injection can be used to bypass authentication, access or modify sensitive data, execute commands, etc. To exploit the web application and fetch the user credentials, one has to follow these steps:Open a web browser and type www.movieabc.comPress Enter key to access the web application.Enter sam as username and test as password.Click on Login button.Observe that a welcome message with username sam is displayed.Click on Logout button.Enter sam’ or ‘1’=’1 as username and test as password.Click on Login button.Observe that a welcome message with username admin is displayed, indicating that SQL injection was successful.Click on Logout button.Enter sam’; SELECT * FROM users; – as username and test as password.Click on Login button.Observe that an error message with user credentials from users table is displayed.The user credentials from users table are:The UID that is mapped to user john is 4.QUESTION 29Rickson, a security professional at an organization, was instructed to establish short-range communication between devices within a range of 10 cm. For this purpose, he used a mobile connection method that employs electromagnetic induction to enable communication between devices. The mobile connection method selected by Rickson can also read RFID tags and establish Bluetooth connections with nearby devices to exchange information such as images and contact lists.Which of the following mobile connection methods has Rickson used in above scenario?  NFC  Satcom  Cellular communication  ANT  Loading … Get Latest 212-82 Dumps Exam Questions in here: https://www.test4engine.com/212-82_exam-latest-braindumps.html --------------------------------------------------- Images: https://blog.test4engine.com/wp-content/plugins/watu/loading.gif https://blog.test4engine.com/wp-content/plugins/watu/loading.gif --------------------------------------------------- --------------------------------------------------- Post date: 2024-06-13 11:14:52 Post date GMT: 2024-06-13 11:14:52 Post modified date: 2024-06-13 11:14:52 Post modified date GMT: 2024-06-13 11:14:52