Juniper JN0-363 Questions and Answers Guarantee you Oass the Test Easily [Q141-Q161] : Exam for engine : http://blog.test4engine.com

QUESTION 141
Referring to the exhibit, internal BGP between R1 and R2 is not establishing.
What is the problem In this scenario?

R1 does not have a route to 192.168.200.2.

R1 and R2 must each have unique AS numbers.

R1 needs to be configured with an explicit router ID.

R1 needs to be configured with a next-hop self policy.

QUESTION 142
Click the Exhibit.

Referring to the configuration in the exhibit, which two statements are true? (Choose two.)

The next-hop 172.16.1.2 must respond to ping commands for the route 192.168.5.0/24 to be active.

The next-hop 172.16.1.2 must be active in route table inet 3 for the route 192.168.5.0/24 to be active.

The next-hop 172.16.1.2 must be part of an active route in route table inet 0 for route 192.168.5.0/24 to be active.

The next-hop 172.16.1.2 must be directly connected to the router for route

QUESTION 143
Which three statements are true regarding the show system switchover operational mode command? (Choose three.)

This command can only be issued on the master Routing Engine.

This command displays the status of graceful switchover.

This command can only be issued on the backup Routing Engine.

This command displays the status of the interface and process databases.

This command displays the status of the kernel database.

QUESTION 144
Exhibit

You configured interface ge-0/070.0 to run IS-IS. but this interface does not appear in the output of the show isis adjacency command as shown in the exhibit.
What is the problem in this scenario?

This is a Gigabit Ethernet interface, that is incompatible with the reference-bandwidth 100g statement.

The family iso statement must be added to the logical interface.

The router at the other end of the link Is not sending any IS-IS Hello messages.

The router at the other end of the link is a Level 1 only router.

QUESTION 145
Exhibit
S Exhibit
LSI1 A AS 65501
ISPB AS 65502
Advertised Prefixes: 172.20.0.0/24 172.20.20.0/24 172.20.21.0/24
N
Advertised Prefixes: 172.20.0.0/24
172.20.1.0/24

Referring to the exhibit, which two statements are correct? (Choose two.)

Devices in AS 65512 will prefer ISP A for traffic destined to the 172.20.21.0/24 network.

Devices In AS 65512 will prefer ISP A for traffic destined to the 172.20.0.0/24 network.

Devices in AS 65512 will prefer ISP B for traffic destined to the 172.20.21.0/24 network.

Devices In AS 65512 will prefer ISP B for traffic destined to the 172.20.0.0/24 network.

QUESTION 146
What are three well-known mandatory BGP attributes? (Choose three.)

next hop

origin

community

MED

AS path

QUESTION 147
Click the Exhibit.

Referring to the configuration in the exhibit, which two statements are true? (Choose two.)

The next-hop 172.16.1.2 must respond to ping commands for the route 192.168.5.0/24 to be active.

The next-hop 172.16.1.2 must be active in route table inet 3 for the route 192.168.5.0/24 to be active.

The next-hop 172.16.1.2 must be part of an active route in route table inet 0 for route 192.168.5.0/24 to be active.

The next-hop 172.16.1.2 must be directly connected to the router for route

QUESTION 148
Referring to the exhibit, internal BGP between R1 and R2 is not establishing.
What is the problem In this scenario?

R1 does not have a route to 192.168.200.2.

R1 and R2 must each have unique AS numbers.

R1 needs to be configured with an explicit router ID.

R1 needs to be configured with a next-hop self policy.

QUESTION 149
Click the Exhibit.

You are receiving the same route prefix from four EBGP neighbors.
Based on the information provided in the exhibit, which route will become active?

Route2

Route3

Route4

Route1

QUESTION 150
You want to see a detailed list of all established BGP sessions. In this scenario, what would be a valid command to accomplish this task?

show bgp neighbor

show bgp summary

show rouse receive-protocol bgp <neighbor IP address>

show rouse protocol bgp

QUESTION 151
Which type of load balancing is shown in the exhibit?

elastic load balancing

per-packet load balancing

per-flow load balancing

network load balancing

QUESTION 152
Click the Exhibit button. The policy shown in the exhibit has been configured and installed on your router.

What is the result of applying this policy?

The 172.18.1.0/24 network will be redistributed into OSPF as an external route.

The 172.18.1.0/24 network will be redistributed into OSPF as an internal route.

The 172.18.1.0/32 network will be redistributed into OSPF as an external route.

The 172.18.1.0/32 network will be redistributed into OSPF as an internal route.

QUESTION 153
Click the Exhibit button.

The routers shown in the exhibit are configured for segment routing.
In this scenario, what is the adjacency SID that Router B advertises to Router A?

11

10.1.1.2

10.1.1.1

12

QUESTION 154
Which BGP message type is used to re-advertise routes that have already been sent to a peer and acknowledged using TCP?

update

keepalive

notification

refresh

QUESTION 155
Click the exhibit.

You are asked to enable a new BGP connection on R1, which has an existing IPv4 peering with R2. The new peering with R3 will use IPv6.
Referring to the exhibit, which two steps are required to enable the new IPv6 peering? (Choose two.)

Configure an IPv6 address on the appropriate interface.

Configure the rib inet6.0 statement under the BGP group.

Configure an IPv6 neighbor address under the BGP group.

Configure an IPv6 local address under the BGP group.

QUESTION 156
Referring to the exhibit, which two statements are correct? (Choose two.)

Prefixes in Level 1 will be redistributed to Level 2.

Prefixes In Level 2 will be not redistributed to Level 1.

Prefixes in Level 2 will be redistributed to Level 1.

Prefixes in Level 1 will not be redistributed to Level 2.

QUESTION 157
Click the Exhibit.

You are planning the addition of a new EX3400 Series device to the network (EX-3400-7) to service MSTI-1 and MSTI-2.
Referring to the exhibit, which requirement must be met on EX-3400-7 for the MSTP instances to become fully operational and resilient?

The MSTP revision-level must be incremented.

The CIST must be extended to EX-3400-7.

The MSTP configuration-name must be the same.

The bridge-priority must match EX-3400-5 and EX-3400-6.

QUESTION 158
Exhibit

Which two statements are correct about the information shown in the exhibit? (Choose two.)

The root bridge is reachable using the ge-0/0/14 interface.

This switch is the root bridge for this spanning tree topology.

This switch has a bridge priority of 8k.

The root bridge’s priority Is 4k.

QUESTION 159
Click the Exhibit.

Referring to the configuration in the exhibit, which statement is true?

The next-hop 172.16.1.2 must be directly connected to the router for route 192.168.5.0/24 to be active.

The next-hop 172.16.1.2 must be part of an active route in route table inet.0 for route 192.168.5.0/24 to be active.

The next-hop 172.16.1.2 must respond to ping commands for the route 192.168.5.0/24 to be active.

The next-hop 172.16.1.2 must be active in route table inet.3 for the route 192.168.5.0/24 to be active.

QUESTION 160
Which new field is added to an IPv6 header as compared lo IPv4?

version

checksum

fragment offset

flow label

QUESTION 161
Exhibit

Referring to the exhibit, which statement is true about VRRP?

VRRP communication between the two devices is not functioning correctly.

Both routers are in the same state because they have the same VRRP priority.

VRRP Is functioning normally in active/active mode.

The routers should use different virtual IP addresses for VRRP to function correctly.