Test4Engine TMMi-P_Syll2.1 Dumps PDF - 100% Passing Guarantee [Q44-Q62] : Exam for engine : http://blog.test4engine.com

Exam for engine
https://blog.test4engine.com/2025/02/10/test4engine-tmmi-p_syll2-1-dumps-pdf-100-passing-guarantee-q44-q62/
Export date: Fri Feb 21 15:47:28 2025 / +0000 GMT

Test4Engine TMMi-P_Syll2.1 Dumps PDF - 100% Passing Guarantee [Q44-Q62]

Test4Engine TMMi-P_Syll2.1 Dumps PDF - 100% Passing Guarantee

TMMi-P_Syll2.1 Braindumps Real Exam Updated on Feb 10, 2025 with 113 Questions

NEW QUESTION 44
Study the following description:
“Testing is a thoroughly defined, well-founded and measurable process. Testing is perceived as evaluation; it consists of all lifecycle activities concerned with checking products and related work products.” To which TMMi maturity level does this description apply?

TMMi Level 2 Managed

TMMi Level 3 Defined

TMMi Level 4 Measured

TMMi Level 5 Optimization

NEW QUESTION 45
Consider the following specific goal “Project Goals for Product Quality and their Priorities are Established”.
To which of the following process areas does this specific goal belong?

Test Measurement

Product Quality Evaluation

Advanced Reviews.

Test Policy and Strategy

NEW QUESTION 46
Which of the following statements best describes the difference between a Specific Goal and a Generic Goal in the TMMi model?

A Specific Goal is applicable to multiple process areas, whereas a Generic Goal is applicable to one process area only.

A Generic Goal is applicable to multiple process areas, whereas a Specific Goal is applicable to one process area only.

A Specific Goal is the institutionalization of a Generic Goal.

Generic Goals are re-used from the CMMI and the Specific Goals are related to their implementation specifically for testing.

NEW QUESTION 47
Which of the following statements is FALSE about the level 5 process area Defect Prevention?

Defect prevention practices propose solutions to eliminate common causes of defects.

In order to prevent as many defects as possible, all defects should be analyzed.

Defect Prevention is based on an analysis of a subset of all defects.

Action proposals drive the improvement activities to prevent defects from reoccurring.

NEW QUESTION 48
Which of the following is an example of a direct benefit for a test improvement program?

Higher productivity

Training

Higher staff motivation

Increased loyalty from customers

NEW QUESTION 49
Given the following assessment phases:
1. Interview phase
2. Planning phase
3. Preparation phase
4. Reporting phase
Which of following orderings matches the generic assessment process?

1, 2, 3, 4

2, 3, 1, 4

3, 2, 1, 4

2, 1, 3, 4

NEW QUESTION 50
The three TMMi level 5 process areas. Defect Prevention, Quality Control and Test Process Optimization, all provide support for continuous process improvement.
Which of the following statements on the relationship between these process areas is correct?

Quality Control supports Defect Prevention by implementing test improvement proposals

Quality Control supports Defect Prevention by evaluating new testing technologies and determining their impact on the testing process.

Test Process Optimization supports Quality Control by analysing outliers to process performance and by implementing practices to prevent defect re-occurrence.

Defect Prevention supports Test Process Optimization by submitting test improvement proposals

NEW QUESTION 51
TMMi distinguishes between required, expected and informative components.
Which of the following is an example of an informative TMMi model component?

Specific Practices

Sub-practices

Generic Practices

Generic Goals

NEW QUESTION 52
The Learning phase completes the improvement cycle. One of the goals of the IDEAL model is to continuously improve the ability to implement change. Which of the following activities is part of the Learning phase?

Develop Recommendations

Refine Solution

Analyse and Validate

Propose Immediate Actions

NEW QUESTION 53
The three TMMi level 5 process areas, Defect Prevention, Quality Control and Test Process Optimization, all provide support for continuous process improvement.
Which of these process areas is specifically aimed at identifying new testing technologies that may be appropriate and to transition them into the organization?

Defect Prevention

Quality Control

Test Process Optimization

All three level 5 process areas specifically address new testing technologies.

NEW QUESTION 54
Your organization performs code reviews and architectural reviews on a regular basis, in order to measure product quality early in the lifecycle.
This is an example of implementation of a specific practice from which TMMi level 4 process area?

Product Quality Evaluation

Test Measurement

Advanced Reviews

Quality Control

NEW QUESTION 55
An organization is facing too many defects occurring during production. As a consequence, an important test improvement goals for the next improvement cycle is to improve the quality (effectiveness) of the test cases.
Which of the following specific practices needs to be addressed, in the context of the improvement goal, as part of SG 1 “Perform Test Analysis and Design using Test Design Techniques” of the Test Design and Execution process area?

Develop and Prioritize Test Procedures

Specify Intake Test Procedure

Identify and Prioritize Test Charters

Identify and Prioritize Test Conditions

NEW QUESTION 56
Which of the following statements is FALSE regarding TMMi improving the different aspects of testing?

TMMi focuses only on higher test levels such as system and acceptance test.

TMMi addresses all four cornerstones for structured testing, namely lifecycle, techniques, infrastructure and organization.

TMMi addresses all test levels including static testing.

TMMi is intended to support testing activities and test process improvement in both systems and software engineering.

NEW QUESTION 57
Which of the following is NOT a specific goal for the process area Test Organization?

Provide Necessary Test Training

Establish Test Functions for Test Specialists

Determine, Plan and Implement Test Process Improvements

Establish Test Career Paths

NEW QUESTION 58
Which of the following are valid reasons to perform a TMMi assessment?
1) Evaluate the performance of testers
2) Find areas to need to be improved
3) Determine which accomplishments have been made
4) As a basis to become formally TMMi certified

1, 2 and 3

1, 2 and 4

1, 3 and 4

2, 3 and 4

NEW QUESTION 59
Which of the following is a specific goal of the process area Advanced Reviews?

Measure Product Quality Early in the Lifecycle by Means of Peer Reviews

Establish a Peer Review Approach

Peer Review Activities are Planned

Defects in Software Work Products are Identified and Removed

NEW QUESTION 60
Which of the following process areas is a TMMi level 4 process area?

Test Policy and Strategy

Defect Prevention

Test Lifecycle and Integration

Advanced Reviews

NEW QUESTION 61
Consider the following specific goal “Coordinate the Peer Review Approach with the Dynamic Test Approach”. To which of the following process areas does this specific goal belong?

Test Planning

Test Life Cycle and Integration

Peer Reviews

Advanced Reviews

NEW QUESTION 62
Improvement models can have a staged and/or continuous representation. The TMMi has been developed as a staged model.
Which of the following statements regarding a staged improvement model is TRUE?

An organization can select process areas for improvement based on business objectives.

A staged representation uses a predefined set of process areas to define an improvement path for an organization.

A staged representation has no fixed set of levels to proceed through.

Practical experiences have shown that a staged representation is more difficult to use than a continuous representation due to its flexibility.

ISQI TMMi-P_Syll2.1 Exam Syllabus Topics:

Topic	Details
Topic 1	TMMi in an Agile Context: This section examines TMMi's role and adaptation within Agile environments, demonstrating to IT quality assurance managers how to integrate TMMi practices seamlessly into Agile workflows without disrupting flexibility.
Topic 2	TMMi Assessments: Outlines both formal and informal assessments within the improvement process, enabling IT quality assurance managers to accurately gauge testing maturity and identify targeted areas for refinement and enhancement.
Topic 3	Context of Test Improvement: This section explores the business rationale and benefits associated with test improvement, providing IT quality assurance managers with insights into how structured test processes drive efficiency, reduce costs, and enhance software quality across projects.
Topic 4	Introduction to the TMMi Model: Focuses on the fundamentals of the CMMI and TMMi models, their relevance, and the key differences between them, giving IT quality assurance managers a comprehensive understanding of each model's framework for test process improvement.
Topic 5	Implementing TMMi: Summarizes essential activities for initiating TMMi, along with key elements of a test policy, providing IT quality assurance managers with a clear roadmap for launching and sustaining TMMi-based improvements effectively.

TMMi-P_Syll2.1 Dumps With 100% Verified Q&As - Pass Guarantee or Full Refund: https://www.test4engine.com/TMMi-P_Syll2.1_exam-latest-braindumps.html ¹

Links:

https://www.test4engine.com/TMMi-P_Syll2.1_exam-la test-braindumps.html

Post date: 2025-02-10 14:20:27
Post date GMT: 2025-02-10 14:20:27

Post modified date: 2025-02-10 14:20:27
Post modified date GMT: 2025-02-10 14:20:27

Export date: Fri Feb 21 15:47:28 2025 / +0000 GMT
This page was exported from Exam for engine [ http://blog.test4engine.com ]