Get Latest Feb-2025 Conduct effective penetration tests using Test4Engine CTS-D exam [Q59-Q76]

admin
February 18, 2025

Get Latest Feb-2025 Conduct effective penetration tests using Test4Engine CTS-D exam [Q59-Q76]

Rate this post

Get Latest [Feb-2025] Conduct effective penetration tests using Test4Engine CTS-D

Penetration testers simulate CTS-D exam PDF

AVIXA CTS-D – Design Exam Syllabus Topics:

Topic	Weight
Duty A: Conducting a Needs Assessment	16.8%
Task 1: Identify Decision-makers and Stakeholders	1.6%
Task 2: Identify Skill Level of End Users	2.4%
Task 3: Educate AV Clients	1.6%
Task 4: Review Client Technology Master Plan	3.2%
Task 5: Identify Client Expectations	4%
Task 6: Identify Scope of Work	4%
Duty B:Coordinating with Other Professionals to Develop Project Documentation	23.2%
Task 1: Review A/E (architectural and engineering) drawings	4%
Task 2: Coordinate with architectural/interior design professionals	4%
Task 3: Coordinate with Mechanical Professionals	1.6%
Task 4: Coordinate with Structural Professionals	1.6%
Task 5: Coordinate with Electrical Professionals	3.2%
Task 6: Coordinate with lighting professionals	2.4%
Task 7: Coordinate with IT and network security professionals	4.0%
Task 8: Coordinate with acoustical professionals	1.6%
Task 9: Coordinate with life safety and security professionals	0.8%

Q59. For a flat-floor auditorium with rows of staggered seats, evenly spaced for proper horizontal viewing, which row or rows will determine the preferred minimum height of the bottom of the image on a display at the front of the room?
[Collaborating With Other Professionals/Coordinate architectural/interior design criteria] Response:

First three front rows of the room

Rear three rows of the room

Second row from the back of the room

Ends of the back row of the room

Q60. Eighth-order filters are useful as __________.
Response:

Low-pass filters

Crossover filters

Shelving filters

Notch filters

Q61. What is the primary goal of a needs analysis?
Response:

Identifying the intended use of the space

Selecting the right equipment

Establishing the ‘first use’ date

Meeting the budget requirements

Q62. You need to project an image that has a 4:3 aspect ratio. You measure the screen height and determine that it is 2,286 mm high and 3,048 mm wide. Can you use this screen for the 4:3 image?
Response:

Not enough information to determine

All of the above

Yes

Q63. Which of the following signals can coexist in one conduit without interference?
[Developing AV Designs/Create draft AV design]
Response:

Video and microphone-level audio

Data network and line-level audio

Serial control and video

Speaker level audio and serial control

Q64. For light coming directly from a source such as a lightbulb, what measure and instrument should be used?
Response:

Footcandle with a light impedance meter

Candela with an incident meter

Lux with an incident meter

Foot lambert with an STL

Q65. Two types of meters typically used for signal monitoring are __________ and __________.
Response:

EBU, SMPTE

dBU, PPM

VU, PPM

VU, AES

Q66. Where would the person in charge of verifying system performance locate performance criteria?
Response:

The owner’s manuals

The original installers of the system

The project specifications

The commissioning report

Q67. Which of the following architectural drawing symbols is a detail flag?
Response:

Q68. When creating a schematic diagram of audio signal flow for a project, what must be included in the diagram?
Response:

Conduit runs, pull boxes, bends

Inputs, outputs, equipment rack locations, ceiling venting

Construction materials, wall panels, acoustic tiles

Microphones, mixers, switchers, routers, and processors

Q69. Comprehensive training of end users and support staff is essential to customer satisfaction and also __________.
Response:

Enables the AV contractor to continue to keep paid personnel at the site

Reduces service calls as well as improper use and equipment damage

Reduces AV contractor costs because it is a tax-deductible expense

Is not expensive or time-consuming because the manufacturer pays for it

Q70. Which of the following is a type of control system?
Response:

Cloud-based

Computer-driven

Habitual learning

All of the above

Q71. If your streaming AV system does not support High-bandwidth Digital Content Protection (HDCP), it’s likely the system _______________.
Response:

Won’t be able to play standard-definition video content

Won’t be able to play protected audio streams

Won’t be able to play live video streams

Won’t be able to play high-definition video content

Q72. A 16:9 screen will be installed in a lecture hall. The screen’s diagonal is 72 in (1,829 mm). What is its width?
Response:

72 in (1829 mm)

70 in (1778 mm)

50 in (1270 mm)

63 in (1594 mm)

Q73. Both __________ use transition-minimized differential signaling to transmit high-speed serial data.
Response:

DVI and HDMI

superMHL and DisplayPort

HDMI and DisplayPort

DVI and DisplayPort

Q74. When setting a delay filter, it’s useful to know that sound travels at how many feet (meters) per second at about 70 degrees Fahrenheit?
Response:

1,001 (305)

1,130 (344)

950 (390)

1,025 (312)

Q75. When producing shop drawings such as AV signal flow diagrams, what should be included?
Response:

Details of equipment configuration and interconnections

Details about the building infrastructure and electrical system

Vendor details and specifications

Descriptions of the video feed settings and relays

Q76. Which of the following is a mitigation strategy for addressing security risks introduced by AV systems?
Response:

Putting AV systems on a VLAN

Hiring a security expert