[Q33-Q54] Get up-to-date Real Exam Questions for 5V0-22.23 UPDATED [2025] : Exam for engine : http://blog.test4engine.com

QUESTION 33
A vSAN administrator notices that the VMware Skyline Health: Network Latency Check reports indicate that three hosts are noncompliant.
Which action should the vSAN administrator take?

Immediately reboot the non-compliant hosts

Check VMKNICs, uplinks, physical switches, and associated settings

Rerun the VMware Skyline Health: vSAN Cluster Partition report

Place the non-compliant hosts into an isolated network partition

Explanation
The correct answer is B, check VMKNICs, uplinks, physical switches, and associated settings. This is because the VMware Skyline Health: Network Latency Check reports the network latency between vSAN hosts and displays the network latency in real time. Failure indicates that the network latency is above the normal threshold, which can affect the performance and availability of vSAN. The network latency can be caused by various factors, such as misconfiguration, congestion, or errors in the network components. The vSAN administrator should check the VMKNICs, uplinks, physical switches, and associated settings for any issues and resolve them accordingly. The vSAN administrator can also use tools such as vmkping or esxtop to test the network connectivity and performance between hosts. The other options are incorrect for the following reasons:
A, immediately reboot the non-compliant hosts, is incorrect because rebooting the non-compliant hosts is not a recommended action and can cause more disruption and data loss than resolving the network issue. Rebooting the hosts will also trigger a resynchronization of data across the cluster, which can affect the performance and availability of vSAN.
C, rerun the VMware Skyline Health: vSAN Cluster Partition report, is incorrect because rerunning the VMware Skyline Health: vSAN Cluster Partition report will not help to resolve the network latency issue. The vSAN Cluster Partition report checks if there are any network partitions in the cluster that prevent communication between hosts. The network partition can be caused by network latency, but it is not the same as network latency. The vSAN administrator should first fix the network latency issue before checking for any network partitions.
D, place the non-compliant hosts into an isolated network partition, is incorrect because placing the non-compliant hosts into an isolated network partition will not help to resolve the network latency issue.
It will also cause more problemsfor vSAN, such as data inconsistency, reduced redundancy, and degraded performance. The vSAN administrator should avoid creating any network partitions in the cluster and ensure that all hosts can communicate with each other. References:
VMware vSAN Specialist v2 Exam Preparation Guide, page 9
Network Health – Network Latency Check (2149511)

QUESTION 34
An all-flash vSAN ESA cluster contains four nodes.
Which two storage policies can the cluster satisfy? (Choose two.)

FTT=3 (RAID-1 Mirroring)

FTT=2 (RAID-1 Mirroring)

FTT=I (RAID-5 Erasure Coding)

FTT=I (RAID-1 Mirroring)

FTT=2 (RAID-6 Erasure Coding)

QUESTION 35
What is the purpose of the TRIM/UNMAP process?

Collects vSAN log files

Repairs internal cache errors

Deletes orphaned snapshots

Reclaims disk space

QUESTION 36
An administrator is upgrading multiple vSAN Witness nodes with vLCM (single image management) that are used for vSAN Stretched and two-node Clusters.
What two witness node types can the administrator upgrade? (Choose two.)

Appliance witness node

Shared witness node

Nested witness node

Dedicated witness node

Physical witness node

QUESTION 37
An administrator has 24 physical servers that need to be configured with vSAN. The administrator needs to ensure that a single rack failure is not going to affect the data availability. The number of racks used should be minimized.
What has to be done and configured to achieve this goal?

Distribute servers across at least two different racks and configure two fault domains

Configure disk groups with a minimum of four capacity disks in each server and distribute them across four racks

Enable deduplication and compression

Distribute servers across at least three different racks and configure three fault domains

QUESTION 38
An application refactor requires significant storage that is being added for logs stored on a VM vDISK. The application VMs run on a dedicated vSAN enabled vSphere Cluster with custom CPUs and RAM, and therefore, cannot vMotion to another vSAN enabled cluster.
The administrator needs a vSAN feature that can be used to allocate additional storage from another vSAN enabled vSphere cluster to this vSAN enabled Cluster.
Which vSAN feature should be used for this purpose?

vSAN File Services

vSAN HCI Mesh

vSAN Replication

vSAN Stretched Clusters

QUESTION 39
An organization wants to implement a virtual desktop infrastructure (VDI) solution on their vSAN storage.
They also need to store their applications running inside the VDI environment on vSAN storage.
Which two end-user computing (EUC) solutions could be implemented to satisfy the requirements of the organization? (Choose two.)

Agp_ Volumes

Workspace ONE Access

Horizon

Workspace ONE UEM

Dynamic Environment Manager

QUESTION 40
A vSAN administrator is using the vSAN ReadyNode Sizer to build a new environment. While entering the cluster configurations, a fellow colleague inquires about the Operations Reserve option.
What is the purpose of using this option?

Provides space for internal operations

Configures space for external operations

Reserves space for tolerating failures

Allocates space forvSAN uparades

QUESTION 41
A vSAN administrator wants to transition from VMware Update Manager to vSphere Lifecycle Manager.
Which element is a mandatory requirement to create an image?

ESXi Version

Component

Firmware and Drivers Add-On

Vendor Add-On

QUESTION 42
After reviewing various performance charts at a cluster level, an administrator found an individual VM impacting overall performance of the vSAN cluster.
What feature should be used to introspect multiple performance metrics of a single virtual machine?

esxci

Skyline Health

I/O Trip Analyzer

llOlnsiqht

QUESTION 43
An architect is designing a vSAN stretched cluster and needs to ensure that data remains on a given site in case of a network partition between the sites.
Which configuration would do this?

Preferred and secondary sites

vCenter High Availability

Distributed Resource Scheduler

IvSoh ere High Availability

QUESTION 44
During yesterday’s business hours, a cache drive failed on one of the vSAN OSA nodes. The administrator reached out to the manufacturer and received a replacement drive the following day. When the drive failed, vSAN started a resync to ensure the health of the data, and all objects are showing a healthy and compliant state. The vSAN administrator needs to replace the failed cache drive.
Which set of steps should the vSAN administrator take?

Physically replace the failed cache device, and vSAN will automatically create a new disk group. Then, remove the disk group with the failed device.

Place the disk group into maintenance mode, and select Full Data Migration. Then, physically replace the failed cache device. Afterwards. vSAN will rebuild the disk group automatically.
C Remove the existing vSAN disk group and physically replace thedevice. Thencheck to verify that the ESXi host automatically detects the new device Afterwardsmanually recreate the Disk Group

Physically replace the failed cache device, and vSAN will automatically allocate the storage. Then, rebalance the cache layer.

QUESTION 45
What are two characteristics of a durability component in vSAN? (Choose two.)

Better Performance

Faster resynchronization

Faster snapshot creation

Better Storage utilization

Better Availability

QUESTION 46
An administrator wants to assign a storage policy to a workload on a two-node vSAN OSA cluster consisting of three disk groups each with nested fault domains. The virtual machine must be protected against a disk or disk group failure.
Which two storage policies meet these requirements? (Choose two.)

RAID-5/FTT 2

RAID-1/FTT 3

RAID-6/FTT 2

RAID-5/FTT 1

RAID-1/FTT 1

QUESTION 47
A six-node vSAN ESA cluster contains multiple virtual machines, and a vSAN storage policy with the rule
“Failures to tolerate” set to “1 failure – RAID-5 (Erasure Coding)” is assigned. A vSAN administrator has changed the rule in the assigned policy to “2 failures – RAID-6 (Erasure Coding)”.
What is the result of this change?

No changes occur until the policy is reapplied.

The changes are queued for 60 minutes.

The policy change is rejected immediately.

The updated policy is serially applied to the virtual machines.

QUESTION 48
A three-node vSAN OSA cluster with business critical intensive I/O workload is running out of capacity. Each host consists of five disk groups with four capacity disks. The administrator needs to expand the capacity of the vSAN datastore as soon as possible.
What should the administrator do?

Enable Deduplication and Compression on the cluster level

Add additional capacity by adding a disk on one host and creating a storage pool

Add additional capacity by addinga vSAN ReadyNode to the cluster

Add additional capacity disks to each disk group

Explanation
The correct answer is D, add additional capacity disks to each disk group. This is because adding capacity disks to existing disk groups is the fastest and easiest way to expand the capacity of the vSAN datastore without disrupting any ongoing operations or requiring additional hardware. The administrator can add up to five capacity disks per disk group in vSAN OSA, which means each host can have up to 25 capacity disks in total. The administrator should make sure that the new capacity disks are unformatted and not partitioned, so that vSAN can recognize and claim them. The administrator should also manually rebalance the cluster after adding the capacity disks to distribute the data evenly across the new devices. The other options are incorrect for the following reasons:
A, enable Deduplication and Compression on the cluster level, is incorrect because enabling Deduplication and Compression is not a recommended way to expand the capacity of the vSAN datastore. Deduplication and Compression is a space efficiency feature that reduces the logical space consumption of data by eliminating duplicate blocks and applying compression algorithms. However, enabling Deduplication and Compression requires a full data evacuation and resynchronization, which can be disruptive and time-consuming. Deduplication and Compression also introduces additional CPU and memory overhead, which can affect the performance of the cluster. Deduplication and Compression is only supported on all-flash clusters, not on hybrid clusters.
B, add additional capacity by adding a disk on one host and creating a storage pool, is incorrect because creating a storage pool is not supported in vSAN OSA. A storage pool is a new configuration introduced in vSAN 8 ESA, where all disks are treated as capacity disks and use a new algorithm to distribute data acrossthem. This configuration is not compatible with vSAN OSA, which uses a disk group configuration where one disk is designated as a cache disk and the rest are capacity disks. To use a storage pool, the administrator would need to migrate to vSAN 8 ESA on a new cluster with new hardware.
C, add additional capacity by adding a vSAN ReadyNode to the cluster, is incorrect because adding a vSAN ReadyNode to the cluster is not the fastest or easiest way to expand the capacity of the vSAN datastore. A vSAN ReadyNode is a preconfigured server that meets the hardware requirements for running vSAN. Adding a vSAN ReadyNode to the cluster would require additional hardware procurement, installation, and configuration. It would also increase the compute capacity of the cluster, which may not be necessary for the workload. Adding a vSAN ReadyNode would also trigger a resynchronization of data across the cluster, which can affect the performance and availability of the cluster. References:
VMware vSAN Specialist v2 Exam Preparation Guide, page 10

QUESTION 49
A vSAN administrator needs to build a vSAN ESA cluster with RAID-5/FTT 1 adaptive storage policy.
What is the absolute minimum number of hosts that need to be part of that vSAN ESA cluster?

6 hosts

4 hosts

5 hosts

3 hosts

QUESTION 50
A customer wants to validate if Skyline online health is working for vSAN and finds out that Skyline is not fully configured yet.
What two requirements must be met to make sure that Skyline online health will work? (Choose two.)

Add the Skyline license into Virtual Center

Enable Skyline Health on the vSAN Cluster

Enable CEIP and join the program

Have a working Internet connection

Have vCenter on version 7 or higher

QUESTION 51
After a server power failure, the administrator noticed the scheduled resyncing in the cluster monitor displays objects to be resynchronized under the pending category.
Why are there objects in this category?

The delay timer has not expired.

These objects belong to virtual machines, which are powered off.

Object resynchronization must be started manually.

There are too many objects to be synchronized.

QUESTION 52
An administrator has been tasked with upgrading existing vSAN OSA cluster hosts with a SSD cache device per host to a NVMe device (hot plug).
Which fact should guide the administrator’s action?

The disk groupmust be deleted on each physical host in the vSAN OSA cluster to use the NVMe device.

The disk group does not need to be removed before adding new cache.

The host must be removed from vSAN OSA cluster before changingcache devices.

The cache disk drives must have a larger capacity.

QUESTION 53
What is the purpose of host rebuild reserve in vSAN?

Reserves space for internal operations

Reserves space in case of single host failure

Stores vSphere HA heartbeats

Allocates capacity for vCLS

QUESTION 54
The Resyncing Objects view in the vCenter UI reports that some objects are currently resyncing.
Which two actions would cause this situation? (Choose two.)

A change to the storage policy is applied to the objects.

DRS is relocatingVMs between vSAN nodes.

A host failure occurs in the cluster

HA Virtual Machine Monitoring forced a VM to reboot.

VM snapshot is being deleted.