Exam for engine

NO.19 An architect is designing a VMware Cloud Foundation (VCF) Fleet with multiple workload domains. To reduce hardware costs, an IT executive proposes deploying Fleet Management services and other core management components within one of the shared workload domains and eliminating a dedicated management domain.
Which design principle is recommended for deploying VCF?

NO.20 An architect is responsible for designing a VMware Cloud Foundation (VCF) Private Cloud solution. During a requirements gathering workshop, the customer supplied the following information:
* The solution must support the monitoring of all existing workloads.
* There are currently 15,000 virtual machine workloads running within the existing environment.
* All infrastructure components will also be monitored by the solution.
The solution must ensure that the 99.9% uptime Service Level Agreement can be met.
The solution must be resilient to a single fault domain failure.
The following logical design decisions have been made within the design:
* Deploy the VCF Operations cluster following the High Availability Model.
The following table is from the VCF Operations sizing guide:
Small
Medium
Single-Node Object Maximum
10,000
30,000
Single-Node Max Collected Metrics
1,600,000
5,000,000
Maximum Nodes in a cluster
2
8
Multi-Node Object Maximum
6,000
17,000
Multi-Node Max Collected Metrics
1,400,000
4,000,000
Maximum Objects in a Cluster
12,000
136,000
Maximum Metrics in a Cluster
2,800,000
32,000,000
Maximum Nodes for Continuous Availability per Fault Domain
1
4
Given the information above, which three physical design decisions meet the stated requirements? (Choose three.)

NO.21 An architect is designing the physical and host networking architecture for vSAN Express Storage Architecture (ESA) in a VMware Cloud Foundation (VCF) deployment.
The customer requires maximum storage performance for latency-sensitive, high-IOPS workloads in analytics, artificial intelligence (AI), and machine learning (ML). To achieve this, the design must incorporate Remote Direct Memory Access (RDMA) over Converged Ethernet (RoCE v2) for vSAN data traffic while maintaining a converged network for all other VCF traffic types.
During requirements gathering, the customer specified the following technical requirements:
* Ultra-low latency and maximum throughput for vSAN data traffic.
* Support for Priority Flow Control (PFC) to ensure lossless Ethernet for RoCE v2 traffic.
* Deterministic performance with no dynamic load balancing that could introduce variability in storage I
/O paths.
* End-to-end jumbo frame support across the fabric.
* High availability with tolerance to single NIC or switch failures.
* Converged design where RoCE v2 vSAN traffic is separated by the physical infrastructure with management, vMotion, and NSX overlay traffic traversing a secondary network.
Given these RDMA-enabled vSAN networking requirements in a multi-rack VMware Cloud Foundation (VCF) environment, what are the three key design decisions? (Choose three.)

NO.22 An architect is designing a standardized VMware Cloud Foundation (VCF) environment with VMware NSX for multiple workload domains. The architect chooses to specify the default NSX segment profiles as part of the VCF design baseline rather than creating custom profiles.
Why would an architect specify the default NSX segment profiles in a VCF design?

NO.23 As part of a design for a VMware Cloud Foundation (VCF) solution, an architect has documented the following dependencies and constraints:
* CON001 – Internet access will not be permitted from anywhere within the VCF solution.
* CON002 – The password must not be stored in plain text anywhere within the VCF solution.
* DEP001 – The customer must make the required VCF binaries accessible to the VCF Installer appliance during the deployment phase.
Which design decision should the architect include in the design for the download of the VCF binaries for initial installation?

NO.24 An architect is designing an identity management solution that addresses the following requirements and constraints:
* A single fleet that extends across seven VMware Cloud Foundation (VCF) instances.
* The VCF instances are located in two geographically separated data centers.
* The design should use the minimum footprint required for identity management.
Which two design decisions meet the requirements? (Choose two.)

NO.25 An architect is developing a VMware Cloud Foundation (VCF) solution for a single tenant with the following requirements:
* The configuration must prevent advertisements from being dropped by the Border Gateway Protocol (BGP) loop detection check.
* High bandwidth (40+ Gbps) is needed to support workload traffic.
* Workloads use a mixture of virtual machines and containers.
* Bidirectional Forwarding Detection (BFD) cannot be used due to limitations in the upstream switches.
* Workload traffic is divided between tenants, and packets should not ingress/egress from the same endpoints.
* There is only enough existing hardware to support one Workload Domain.
The architect makes a design decision to use NSX VPC Full Services Model based on the information provided.
When designing the network architecture to support this solution, which two elements should be considered as part of the physical network design? (Choose two.)

NO.26 An architect is designing a VMware Cloud Foundation (VCF) private cloud that is integrated with VCF Automation to support multiple internal departments.
The following requirements were provided:
* Some departments build and operate full application stacks, while others only deploy standardized virtual machines through pre-approved templates.
* Central IT must enforce quota limits, approval workflows, and cost visibility per department, while ensuring strict isolation between departments and least operational overhead.
* The solution must implement the minimum number of organizations to address the above requirements.
Which two tenant design decisions satisfy the requirements? (Choose two.)

NO.27 An architect is tasked with designing a VMware Cloud Foundation (VCF) architecture including multiple VKS clusters across different workload domains.
Security requirements mandate:
* Control plane isolation between tenant Kubernetes environments.
* No shared failure domains across tenants.
* Independent upgrade paths.
Given the requirements, which design approach meets these requirements?

NO.28 An architect is designing a VMware Cloud Foundation (VCF) Single Sign-On (SSO) architecture for a customer environment.
The following requirements have been identified:
REQ01: Workloads must be supported across multiple physical datacenter locations (DC01 and DC02).
REQ02: Administrative access to the platform must use two-factor authentication.
REQ03: The design must minimize operational complexity when managing multiple VCF instances.
Which two design decisions should be documented to meet these requirements? (Choose two.)

NO.29 An architect is designing a VMware Cloud Foundation (VCF) Private Cloud. During a requirements gathering workshop, the customer supplied the following information:
* The solution must support the existing workloads.
* There are currently 10,000 virtual machine workloads running within the existing environment.
* All guest operating systems must be monitored by the solution.
* All infrastructure components must be monitored by the solution.
The solution must ensure that the 99.9% uptime Service Level Agreement can be met.
The solution must be resilient to a single-node failure.
The following logical design decisions have been made within the design:
* Deploy the VCF Operations cluster following the High Availability Model.
The following table is from the VCF Operations sizing guide:
Small
Medium
Single-Node Object Maximum
10,000
30,000
Single-Node Max Collected Metrics
1,600,000
5,000,000
Maximum Nodes in a cluster
2
8
Multi-Node Object Maximum
6,000
17,000
Multi-Node Max Collected Metrics
1,400,000
4,000,000
Maximum Objects in a Cluster
12,000
136,000
Maximum Metrics in a Cluster
2,800,000
32,000,000
Given the information above, which three physical design decisions meet the stated requirements? (Choose three.)

NO.30 An architect is drafting a design document in preparation for the deployment of a new VMware Cloud Foundation (VCF) solution. To minimize costs, the customer has asked that the VCF solution use existing the vSphere infrastructure. The customer has migrated all virtual machines off this infrastructure in preparation for the deployment of VCF.
The following information has been provided about the existing vSphere infrastructure:
* There are three separate vSphere clusters, each consisting of five hosts.
* Each host has been verified to be on the compatibility list.
* Each host has two 10GB network adapters, with a vSphere Distributed Switch (vDS) configured per vSphere cluster.
* A single vCenter manages the three vSphere clusters.
* All clusters use NFSv4.1 for shared storage.
Based on this information, the architect makes a decision to create a new VCF Fleet with a single VCF instance.
What design implication should the architect document for this decision?

NO.31 An architect is designing for a VMware Cloud Foundation (VCF) workload domain to use vSAN, with the following requirements:
* Must support large-scale analytics workloads with ingestion patterns that show burst activity.
* Must ensure stable latency and highly sustained throughput even during cluster expansion and internal component balancing.
Which two design decisions directly address the design trait of performance? (Choose two.)

NO.32 An architect is designing VMware Cloud Foundation (VCF) for a regulated tenant environment.
Requirements include:
* Security requires zero-trust lateral controls.
* Macro and micro segmentation.
* Protection for both management components and tenant workloads using repeatable prescriptive guidance.
What VCF Advanced Service satisfies the requirements?

NO.33 An architect is designing a new VMware Cloud Foundation (VCF) Infrastructure. The organization has defined the following requirements for the new production workload domain storage tier:
* The storage solution must utilize RAID-6 Erasure Coding to meet strict application latency SLAs.
* To simplify hardware lifecycle management, the storage architecture must be single-tier, eliminating the distinction between cache and capacity drives.
* The cluster must support future expansion using vSAN Storage Clusters.
Based on these requirements, the architect has made the design decision to deploy the vSAN Express Storage Architecture (ESA) Storage Model .
Which design implication is mandatory for this decision?

NO.34 An architect is designing a VMware Cloud Foundation (VCF) infrastructure Virtual Private Cloud (VPC) IP Address Management (IPAM) Model. An architect recognizes a potential problem with maximum Private TGW blocks.
What is the maximum Private TGW IP blocks in a connectivity profile?

NO.35 As part the VMware Cloud Foundation (VCF) logical design, the architect has determined that the VCF Private Cloud will encompass multiple VCF instances contained within a single VCF Fleet. The architect documented the following requirements when using VCF Operations:
* Monitoring downtime must be minimized.
* Alerting downtime must be minimized.
Which design decision supports these requirements?

NO.36 An architect is defining the management-plane identity architecture for a VMware Cloud Foundation (VCF) platform. Requirements include:
* Single sign-on (SSO) across VCF Components.
* Integration to a corporate Identity Provider that supports SAML 2.0 or OIDC.
* Eliminate the dependency on local, per-domain identity silos.
Which identity architecture should the architect select?