Get Dec-2022 updated Exam 201 Dumps with New Questions [Q66-Q82]

admin
December 12, 2022

Get Dec-2022 updated Exam 201 Dumps with New Questions [Q66-Q82]

Rate this post

Get Dec-2022 updated Exam 201 Dumps with New Questions

100% Pass Guarantee for 201 Exam Dumps with Actual Exam Questions

Understanding of functional and technical aspects of Troubleshooting Basic Virtual Server Connectivity Issues

The following will be discussed in this section:

Determine if the virtual server is configured with the appropriate profiles
Explain the concept of “persistence”
Understand how a virtual server processes a request (most specific to least specific)
Verify the pool member/node connection configuration and count
Verify the type of persistence profile assigned to the virtual server in question
Determine if a virtual server is configured with the proper IP address configuration
Understand how a packet is processed once it arrives at device (connection table, packet filters, etc.)
Given a specific connectivity issue, isolate where the problem might be according to the processing order
Understand the effects of health monitors on the status of pool members/nodes
Differentiate between fallback and primary persistence
Determine the state and availability of the pool member/node in question
Validate the expected persistence behavior
Determine if a virtual server is configured for the proper listening port
Determine if the pool configuration has an effect on virtual server state
Determine the state of a virtual server (offline, enabled, etc.)

Introduction to F5-201: TMOS Administration Exam

The qualified candidate is capable of performing day-to-day operations of TMOS-based devices which have already been installed. They are also capable of basic troubleshooting of a TMOS-based device in order to provide full, accurate, and appropriate information to senior engineers and/or F5 Support.

They can do any of the following without assistance:

Understand the relationship and differentiation between virtual servers, virtual server types, virtual addresses, pools, pool members, nodes, profiles, iRules, and address translation (NAT/SNAT)
Be familiar with HTTP, ClientSSL, ServerSSL, TCP, UDP, and persistence profiles
Perform software management functions on the platform (for example, capable of performing upgrades and licensing).

NO.66 The interface 1.1 of the BIG-IP device has been connected to a link dedicated to traffic on VLAN 120. What should the BIG-IP Administrator do to receive traffic from the VLAN?

Create a new VLAN object and set Customer Tag to 120

Create a new VLAN object and assign the interface 1.1 untagged

Create a new trunk object with interface 1.1 assigned

Create a new trunk object and assign it to the VLAN

NO.67 New Syslog servers have been deployed in an organization. The BIG-IP Administrator must reconfigure the BIG-IP system to send log messages to these servers.
In which location in the Configuration Utility can the BIG-IP Administrator make the needed configuration changes to accomplish this?

System > Logs > Configuration

System > Configuration > Local Traffic

System > Logs > Audit

System > Configuration > Device

NO.68 What is the purpose of MAC masquerading?

to prevent ARP cache errors

to minimize ARP entries on routers

to minimize connection loss due to ARP cache refresh delays

to allow both BIGIP devices to simultaneously use the same MAC address

NO.69 The incoming client IP address is 195.64.45.52 and the last five connections have been sent to members A, C, E, D and B. Given the virtual server, pool, and persistence definitions and statistics shown in the above graphic, which member will be used for the next connection?

10.10.20.1:80

10.10.20.2:80

10.10.20.3:80

10.10.20.4:80

10.10.20.5:80

It cannot be determined with the information given.

NO.70 Refer to the exhibit.

A BIG-IP Administrator needs to deploy an application on the BIG-IP system to perform SSL offload and re-encrypt the traffic to pool members.
During testing, users are unable to connect to the application.
What must the BIG-IP Administrator do to resolve the issue?

Remove the configured SSL Profile (Client)

Configure Protocol Profile (Server) as splitsession-default-tcp

Enable Forward Proxy in the SSL Profile (Client)

Configure an SSL Profile (Server)

According to the requirements of the subject, the client and server must be configured with ssl profile.

NO.71 What is required for a virtual server to support clients whose traffic arrives on the internal VLAN and pool members whose traffic arrives on the external VLAN?

That support is never available.

The virtual server must be enabled for both VLANs.

The virtual server must be enabled on the internal VLAN.

The virtual server must be enabled on the external VLAN.

NO.72 A BIGElIP has
two load balancing
virtual servers at 150.150.10.10:80 and
150.150.10.10:443. The port 80 virtual
server has SNAT
automap
configured. There is also a SNAT configured at 150.150.10.11 set for a source address range of
200.200.1.0 / 255.255.255.0. All other settings are at their default states. If a client with the IP address 200.200.1.1 sends a request to https://150.150.10.10, what is the source IP address when the associated packet is sent to the pool member.

200.200.1.1

150.150.10.11

Floating self IP address on VLAN where the packet leaves the system

Floating self IP address on VLAN where the packet arrives on the system

NO.73 Refer to the exhibit
The BIG-IP Administrator is unable to access the management console via Self-IP 10.10 1.33 and port 443.
What is the reason for this problem?

Packet Filter needs to be configured to allow a source

Self IP is configured to allow TCP All

Self IP is configured to allow UDP 443

Packet Filter is configured to allow port 443

NO.74 Which two can be a part of a virtual server’s definition. (Choose two.)

rule(s)

pool(s)

monitor(s)

node address(es)

loadElbalancing method(s)

NO.75 A site needs to terminate client HTTPS traffic at the BIG-IP and forward that traffic unencrypted. Which two are profile types that must be associated with such a virtual server? (Choose two.)

TCP

HTTP

HTTPS

ClientSSL

ServerSSL

NO.76 Which statement is true about the synchronization process, as performed by the Configuration Utility or by typing b config sync all.

The process should always be run from the standby system.

The process should always be run from the system with the latest configuration.

The two /config/bigip.conf configuration files are synchronized (made identical) each time the process is run.

Multiple files,
including
/config/bigip.conf and
/config/bigip_base.conf,
are synchronized (made identical) each time the process is run.

NO.77 Which action will take place when a failover trigger is detected by the active system.

The active device will take the action specified for the failure.

The standby device also detects the failure and assumes the active role.

The active device will wait for all connections to terminate and then failElover.

The standby device will begin processing virtual servers that have failed, but the active device will continue servicing the functional virtual servers.

NO.78 When network failElover is enabled, which of the following is true.

The failElover cable status is ignored. FailElover is determined by the network status only.

Either a network failure or loss of voltage across the failElover cable will cause a failElover.

A network failure will not cause a failElover as long as there is a voltage across the failElover cable.

The presence or absence of voltage over the fElo av iler cable takes precedence over network failElover.

NO.79 Which statement is true concerning SSL termination?

A virtual server that has both ClientSSL and ServerSSL profiles can still support cookie persistence.

Decrypting traffic at the BIG-IP allows the use of iRules for traffic management, but increases the load on the pool member.

When any virtual server uses a ClientSSL profile, all SSL traffic sent to the BIG-IP is decrypted before it is forwarded to servers.

If a virtual server has both a ClientSSL and ServerSSL profile, the pool members have less SSL processing than if the virtual server had only a ClientSSL profile.

NO.80 A BIG-IP Administrator remotely connects to the appliance via out-of-band management using
https://mybigip mycompany net. The management portal has been working all week. When the administrator attempts to login today, the connection times out. Which two aspects should the administrator verify? (Choose two)

DNS is property resolving the FQDN of the device.

The device is NOT redirecting them to http.

The administrator has the latest version of the web browser.

Packet Filters on the device are blocking port 80.

The administrator has TCP connectivity to the device.

NO.81 Refer to the exhibit.

A BIG-IP Administrator needs to deploy an application on the BIG-IP system to perform SSL offload and re-encrypt the traffic to pool members.
During testing, users are unable to connect to the application.
What must the BIG-IP Administrator do to resolve the issue?

Remove the configured SSL Profile (Client)

Configure Protocol Profile (Server) as splitsession-default-tcp

Enable Forward Proxy in the SSL Profile (Client)

Configure an SSL Profile (Server)

Explanation
According to the requirements of the subject, the client and server must be configured with ssl profile.

NO.82 Refer to the exhibit.

The BIG-IP Administrator is investigating disk utilization on the BIG-IP device.
What should the BIG-IP Administrator check next?

Large files on the / file system

Results from the EUD test

Results from the platform diagnostics test

Large files on /usr file system

Loading …

Difficulty in Attempting F5-201: TMOS Administration Exam

If the user has successfully passed the F5-201 practice exam and has been through F5-201 exam dumps then the certification exam will not be too much difficult as the user has shown aptitude for understanding complicated processes.

201 exam dumps with real F5 questions and answers: https://www.test4engine.com/201_exam-latest-braindumps.html