[Aug-2025] CFPS Dumps Full Questions – Fire Protection Specialist Exam Study Guide [Q104-Q122]

Rate this post

[Aug-2025] CFPS Dumps Full Questions – Fire Protection Specialist Exam Study Guide

Exam Questions and Answers for CFPS Study Guide

NFPA CFPS Exam Syllabus Topics:

Topic	Details
Topic 1	Fire Suppression: This topic covers the knowledge of fire suppression systems, including routine maintenance, testing, and system design considerations. Fire protection consultants will be expected to demonstrate their ability to evaluate fire suppression systems, such as sprinklers and non-water-based systems, and ensure their proper functionality following codes and local policies.
Topic 2	Detection and Alarm: In this topic, Fire protection consultants will need to demonstrate their expertise in the operational characteristics of fire alarm systems and detection technologies. They will be tested on their ability to apply relevant codes, inspect systems, and ensure compliance with safety standards.
Topic 3	Safety in the Built Environment: This topic will test the knowledge and skills of Fire protection consultants in evaluating and ensuring the proper application of fire protection systems in various buildings. They must demonstrate their ability to analyze fire safety protocols, building systems, and regulations for compliance.
Topic 4	Facility Fire Hazard Management: The exam will assess the proficiency of Fire protection consultants in managing and mitigating fire hazards in facilities through effective planning and system management. Candidates must demonstrate their understanding of architectural drawings, risk assessments, and the integration of fire protection systems to ensure safety across all building operations and emergency preparedness protocols.
Topic 5	Confining Fires: Fire protection consultants will be tested on their ability to recommend and ensure the proper installation and maintenance of fire-resistant construction, including firewalls and barriers. This section will assess their knowledge of smoke control methods and their ability to assist in the design of systems that limit fire spread, ensuring that buildings are equipped to confine fires and protect occupants.

NO.104 How many extra sprinklers should be kepi for a system size of more than 1000?

6 sprinklers

12 sprinklers

14 sprinklers

48 sprinklers

NO.105 What class designation is given to a standpipe system consisting of a 2 . inch (6.35 cm) hose valve specifically for fire department use and a 1 . inch (3.81 cm) hose valve complete with hose and nozzles for building occupant use?

Class III

Class I

Class IV

Class II

NO.106 The ignition test method that exposes the specimen to a known heat flux from a tungsten-quartz heater is referred to as a

fire propagation apparatus.

lateral ignition apparatus.

cone calorimeter.

intermediate-scale calorimeter.

NO.107 The duration of required fire flow in public supply systems ranges from

1-4 hours.

1-6 hours.

2-10 hours.

3-8 hours.

NO.108 What is one potential means for dispersing a chemical agent over a wide area?

Steam radiators

Crop-dusting aircraft

Railway tank cars

55-gallon drums

NO.109 What is the minimum pipe diameter size for direct discharge of steam inside a water tank?

1/2 in. (13 mm)

1 in. (25 mm)

1 1/2 in. (38 mm)

2 in. (50 mm)

NO.110 in public operating mode how many decibels above the 24-hour average must the sonic pressure level (SPL) produced by a fire alarm system reach?

5 db

12 db

15 db

20 db

NO.111 Which of the following NFPA Standards governs wiring for fire alarm systems?

NFPA 70

NFPA 73

NFPA 75

NFPA 76

NO.112 Air atomizing nozzles which combine compressed gas with a water stream are also known as:

impinging jet nozzles

twin-fluid nozzles

impingement nozzles

pressure jet nozzles

NO.113 Which classification would indicate that a refrigerant has a low toxicity, but is highly flammable?

NO.114 Walls designed as vertical bean elements that resist forces perpendicular to an element subjected to bending in-plane bending, and in-plane shear is known as______.

A compression resistive wall

A vertical chord wall

A load to ground wall

A shear wall

NO.115 In a large-scale test organized by the Fire Protection Research Foundation (FPRF) to study the interaction between sprinklers, roof vents, and draft curtains, what factor made the test results difficult to interpret for use in field applications?

External environmental forces on the test building

The number of vents used during the tests

The use of an exhaust to an abatement system

The controlled nature of the tests

NO.116 Four-way automatic sprinkler bracing prevents both lateral and:

Horizontal movement

Vertical movement

Longitudinal movement

Diagonal movement

NO.117 Which type of fire alarm system transmits signals that are permanently recorded at a constantly attended supervising station located either at the protected premises or at another location of the property owner?

Proprietary

Auxiliary

Central station

Remote station

NO.118 The greatest number of civilian home fire deaths can be attributed to what area of fire origin in the home?

Kitchen or cooking area

Heating equipment room

Garage or vehicle storage area

Common room, living room

The correct answer is D. The greatest number of civilian home fire deaths can be attributed to the common room, living room, or family room area of origin in the home. According to a report by the NFPA, based on data from the National Fire Incident Reporting System (NFIRS) and NFPA’s fire experience survey, 31 percent of the civilian home fire deaths in 2017-2021 occurred in fires that started in the common room, living room, or family room. This was followed by 29 percent of the deaths in fires that started in the bedroom or sleeping area, and 12 percent of the deaths in fires that started in the kitchen or cooking area. The common room, living room, or family room area of origin is also the leading area of origin for home fires and civilian home fire injuries, accounting for 24 percent and 21 percent of those incidents, respectively. Some of the common causes of fires in the common room, living room, or family room include smoking materials, heating equipment, electrical equipment, candles, and fireplaces. To prevent fires and fire deaths in the common room, living room, or family room, the NFPA recommends the following safety tips:
Keep smoking materials away from anything that can burn. Use deep, sturdy ashtrays and wet cigarette butts before discarding them.
Keep space heaters at least 3 feet away from anything that can burn. Turn them off when you leave the room or go to sleep.
Have a qualified electrician inspect and repair any faulty wiring or outlets. Avoid overloading circuits or extension cords. Unplug appliances when not in use.
Keep candles in sturdy holders and away from children, pets, and anything that can burn. Blow them out when you leave the room or go to sleep.
Have your chimney and fireplace cleaned and inspected annually by a professional. Use a metal or glass screen to keep sparks from flying out. Dispose of ashes in a metal container with a lid, and keep it outside at least 10 feet away from your home.
Install smoke alarms on every level of your home, inside each bedroom, and outside each sleeping area. Test them monthly and replace the batteries at least once a year. Consider installing a home fire sprinkler system for added protection.

NO.119 Typical fire pump drivers reach maximum brake horsepower between

65-85% of rated capacity.

90-100% of rated capacity.

110-125% of rated capacity.

140-170% of rated capacity.

NO.120 To be effective, liquid nerve agents must be in ________ form.

solid

liquid

aerosol

dried

NO.121 Critical radiant flux is used to classify_____

Roofing materials

Interior wan finishes

Interior floor finishes

Exterior materials

NO.122 Packing radioactive material around an explosive device creates what is known as a
________ bomb.

rad

neutron

dirty

truck

Certified Fire Protection Specialist (CFPS) Free Update With 100% Exam Passing Guarantee: https://www.test4engine.com/CFPS_exam-latest-braindumps.html