[Sep 05, 2025] 300-710 Exam Dumps 100% Same Q&A In Your Real Exam [Q154-Q171]

admin
September 5, 2025

[Sep 05, 2025] 300-710 Exam Dumps 100% Same Q&A In Your Real Exam [Q154-Q171]

Rate this post

[Sep 05, 2025] 300-710 Exam Dumps 100% Same Q&A In Your Real Exam

300-710 Test Engine Dumps Training With 378 Questions

Q154. A network security engineer must replace a faulty Cisco FTD device in a high availability pair.
Which action must be taken while replacing the faulty unit?

Ensure that the faulty Cisco FTD device remains registered to the Cisco FMC

Shut down the active Cisco FTD device before powering up the replacement unit

Shut down the Cisco FMC before powering up the replacement unit

Unregister the faulty Cisco FTD device from the Cisco FMC

Q155. The event dashboard within the Cisco FMC has been inundated with low priority intrusion drop events, which are overshadowing high priority events. An engineer has been tasked with reviewing the policies and reducing the low priority events. Which action should be configured to accomplish this task?

generate events

drop packet

drop connection

drop and generate

Q156. An engineer must build redundancy into the network and traffic must continuously flow if a redundant switch in front of the firewall goes down.
What must be configured to accomplish this task?

redundant interfaces on the firewall cluster mode and switches

redundant interfaces on the firewall noncluster mode and switches

vPC on the switches to the interface mode on the firewall duster

vPC on the switches to the span EtherChannel on the firewall cluster

Virtual Port Channels (vPC) are common EtherChannel deployments, especially in the data center, and allow multiple devices to share multiple interfaces EtherChannel Interface requires stack, VSS or vPC when connected to multiple switches.

Q157. Refer to the exhibit. What is the effect of the existing Cisco FMC configuration?

The remote management port for communication between the Cisco FMC and the managed device changes to port 8443.

The managed device is deleted from the Cisco FMC.

The SSL-encrypted communication channel between the Cisco FMC and the managed device becomes plain-text communication channel.

The management connection between the Cisco FMC and the Cisco FTD is disabled.

Q158. An engineer is tasked with deploying an internal perimeter firewall that will support multiple DMZs Each DMZ has a unique private IP subnet range. How is this requirement satisfied?

Deploy the firewall in transparent mode with access control policies.

Deploy the firewall in routed mode with access control policies.

Deploy the firewall in routed mode with NAT configured.

Deploy the firewall in transparent mode with NAT configured.

Reference:
https://www.cisco.com/c/en/us/td/docs/security/asa/asa96/configuration/general/asa-96-general-config/intro-fw.h

Q159. A security engineer must configure policies tor a recently deployed Cisco FTD. The security policy for the company dictates that when five or more connections from external sources are initiated within 2 minutes, there is cause for concern. Which type of policy must be configured in Cisco FMC z generate an alert when this condition is triggered?

application detector

access control

intrusion

correlation

A correlation policy is a feature that allows you to respond in real time to threats or specific conditions on your network, using correlation rules. A correlation rule can trigger when the system generates a specific type of event, or when your network traffic deviates from its normal profile1. When a correlation rule triggers, the system generates a correlation event and can also launch a response, such as sending an alert, blocking an IP address, or scanning a host1.
In this case, the security engineer can configure a correlation rule that triggers when the system detects five or more connections from external sources within 2 minutes. The engineer can also configure a response that sends an alert to the FMC or an email recipient when this condition is triggered. The engineer can then create a correlation policy that includes this rule and activate it on the FTD device1.
The other options are incorrect because:
* An application detector is a feature that allows you to detect web applications, clients, and application protocols based on patterns in network traffic. An application detector does not generate alerts based on the number of connections from external sources2.
* An access control policy is a feature that allows you to control traffic flow through your network and inspect traffic for intrusions, malware, and files. An access control policy does not generate alerts based on the number of connections from external sources3.
* An intrusion policy is a feature that allows you to detect and prevent malicious network activity using Snort rules. An intrusion policy does not generate alerts based on the number of connections from external sources4.

Q160. While integrating Cisco Umbrella with Cisco Threat Response, a network security engineer wants to automatically push blocking of domains from the Cisco Threat Response interface to Cisco Umbrell a. Which API meets this requirement?

investigate

reporting

enforcement

REST

Q161. Which feature within the Cisco FMC web interface allows for detecting, analyzing and blocking malware in network traffic?

intrusion and file events

Cisco AMP for Endpoints

Cisco AMP for Networks

file policies

Advanced Malware Protection (AMP) for Firepower can detect, capture, track, analyze, log, and optionally block the transmission of malware in network traffic. In the Firepower Management Center web interface, this feature is called AMP for Networks, formerly called AMP for Firepower.
Advanced Malware Protection identifies malware using managed devices deployed inline and threat data from the Cisco cloud.
https://www.cisco.com/c/en/us/td/docs/security/firepower/623/configuration/guide/fpmc-config- guide-v623/file_policies_and_advanced_malware_protection.html

Q162. An organization does not want to use the default Cisco Firepower block page when blocking HTTP traffic. The organization wants to include information about its policies and procedures to help educate the users whenever a block occurs. Which two steps must be taken to meet these requirements? (Choose two.)

Modify the system-provided block page result using Python.

Create HTML code with the information for the policies and procedures.

Edit the HTTP request handling in the access control policy to customized block.

Write CSS code with the information for the policies and procedures.

Change the HTTP response in the access control policy to custom.

Q163. Which command is run at the CLI when logged in to an FTD unit, to determine whether the unit is managed locally or by a remote FMC server?

system generate-troubleshoot

show configuration session

show managers

show running-config | include manager

Reference: https://www.cisco.com/c/en/us/td/docs/security/firepower/command_ref/b_Command_Reference_for_Firepower_Threat_Defense/c_3.html

Q164. Which action should be taken after editing an object that is used inside an access control policy?

Delete the existing object in use.

Refresh the Cisco FMC GUI for the access control policy.

Redeploy the updated configuration.

Create another rule using a different object name.

https://www.cisco.com/c/en/us/td/docs/security/firepower/630/configuration/guide/fpmc-config- guide-v63/reusable_objects.html

Q165. An engineer is implementing Cisco FTD in the network and is determining which Firepower mode to use. The organization needs to have multiple virtual Firepower devices working separately inside of the FTD appliance to provide traffic segmentation Which deployment mode should be configured in the Cisco Firepower Management Console to support these requirements?

multiple deployment

single-context

single deployment

multi-instance

Q166. An engineer is configuring a cisco FTD appliance in IPS-only mode and needs to utilize fail-to- wire interfaces. Which interface mode should be used to meet these requirements?

transparent

routed

passive

inline set

https://www.cisco.com/c/en/us/td/docs/security/firepower/630/configuration/guide/fpmc-config- guide-v63/inline_sets_and_passive_interfaces_for_firepower_threat_defense.html

Q167. What is the result when two users modify a VPN policy at the same lime on a Cisco Secure Firewall Management Center managed device?

Both users can edit the policy arid the last saved configuration persists.

The first user locks the configuration when selecting edit on the policy.

The changes from both users will be merged together into the policy.

The system prevents modifications to the policy by multiple users.

In Cisco Secure Firewall Management Center (FMC), when two users attempt to modify a VPN policy simultaneously, the system implements a locking mechanism to prevent conflicts. The first user who selects edit on the policy locks the configuration, preventing other users from making changes until the lock is released.
Steps:
* When the first user selects edit on the VPN policy, FMC locks the policy for editing.
* The lock ensures that only the first user can make changes.
* Once the first user saves or cancels their changes, the lock is released.
* Other users can then edit the policy.
This locking mechanism ensures that configuration conflicts are avoided and only one set of changes is applied at a time.
References: Cisco Secure Firewall Management Center Configuration Guide, Chapter on Policy Management and User Permissions.

Q168. An administrator Is setting up a Cisco PMC and must provide expert mode access for a security engineer. The engineer Is permitted to use only a secured out-of-band network workstation with a static IP address to access the Cisco FMC. What must be configured to enable this access?

Enable SSH and define an access list.

Enable HTTP and define an access list.

Enable SCP under the Access List section.

Enable HTTPS and SNMP under the Access List section.

Q169. A network security engineer must export packet captures from the Cisco FMC web browser while troubleshooting an issue. When navigating to the address https://<FMC IP>/capture/CAPI/pcap/test.pcap, an error 403: Forbidden is given instead of the PCAP file.
Which action must the engineer take to resolve this issue?

Disable the proxy setting on the browser

Disable the HTTPS server and use HTTP instead

Use the Cisco FTD IP address as the proxy server setting on the browser

Enable the HTTPS server for the device platform policy

Q170. Which feature sets up multiple interfaces on a Cisco Secure Firewall Threat Defense to be on the same subnet?

EtherChannel

SVI

BVI

security levels

Q171. Refer to the exhibit.

A systems administrator conducts a connectivity test to their SCCM server from a host machine and gets no response from the server. Which action ensures that the ping packets reach the destination and that the host receives replies?

Create an access control policy rule that allows ICMP traffic.

Configure a custom Snort signature to allow ICMP traffic after Inspection.

Modify the Snort rules to allow ICMP traffic.

Create an ICMP allow list and add the ICMP destination to remove it from the implicit deny list.

Loading …

Who Can Sit for 300-710?

Particularly, such an exam is for those candidates who are pursuing either the professional-level CCNP Security or the Cisco Certified Specialist – Network Security Firepower designations. To be awarded the latter certificate, all candidates have to nail just 300-710 SNCF test. However, to earn the professional-level CCNP Security certificate, candidates must combine exam 300-710 SNCF with the Cisco 350-701 SCOR, also known as Executing and Operating Cisco Security Core Technologies exam. In all, these certification exams can be taken by people who are looking to validate their IT skills and capabilities. They can also be pursued by those who are looking to acquire new skills that are highly valuable. These Cisco certifications might as well be needed by employees if there has been a change in the law or simply to comply with company requirements. Furthermore, these validations will be perfect for those trying to make their résumés stand out from the competition, which means candidates will be more likely to get hired. To add more, they are perfect for those applicants who are looking to increase the operational efficiency of the company they work for and those looking to receive recognized digital badges for all their social media profiles. As a rule, both of these Cisco certifications have a validity period of 3 years and are to be renewed so they don’t expire. Also, neither of these certificates require any formal prerequisites but examinees are expected to have at least three to five years of experience working with the relevant technologies that they will be tested on.

300-710 Practice Test Pdf Exam Material: https://www.test4engine.com/300-710_exam-latest-braindumps.html