Exam for engine

See the solution in Explanation part below
Explanation:
How to approach this question:
– This is quite an open question and there are many different things you could mention. One way to approach it would be to use Carter’s 10 Cs- discuss a couple of these. OR just give a couple of criteria in different paragraphs. Some ideas include: Supplier financial status, Reputation / Reference, Quality, Availability, CSR Policies / Ethics / Environmental considerations, Accreditations, Added Value. This list is not exhaustive.
– If you’re going for Carter’s 10 Cs you could name a couple of these: competency, consistency, capability, control, cost, cash, clean, communication, culture, commitment
– I don’t think either approach is better or worse. Choose the criteria you know the most about and write about those.
– The question doesn’t tell you how many criteria to name, so you have to make a judgement call here. I would aim for 5-6. But if you can only remember 4 that’s fine. The main thing they’re looking for is that you explain for each one 1) what it is 2) how procurement can check 3) why procurement would look at that criteria 4) an example. If you do too many you risk not going into enough detail on each. It’s a balance. 5 is always a good number to aim for if the question doesn’t state.
Example Essay
In the procurement cycle, the supplier selection phase is a critical juncture that demands consideration. Procurement Managers shoulder the responsibility of identifying and awarding contracts to suppliers who not only meet immediate needs, but contribute to the long-term success of the organization. This essay explores various criteria a Procurement Manager can employ to ensure the selection of the best supplier: financial stability, reputation, quality, availability, CSR policies, and added value.
Financial stability is a foundational criterion in supplier selection. Assessing a supplier’s financial status involves a multifaceted evaluation, with liquidity and gearing ratio taking center stage. The acid test, comparing short-term assets to liabilities, offers insights into a supplier’s ability to settle debts promptly, with a ratio exceeding 1 indicating financial health. Meanwhile, the gearing ratio, reflecting the proportion of capital funded by loans, aids in gauging financial risk, with a ratio below 50% considered low-risk. Relying on published Profit and Loss statements and income statements, along with financial credit checks from platforms like Dun and Bradstreet, empowers Procurement Managers to make informed decisions. This financial scrutiny is imperative to avoid entering contracts with suppliers facing imminent financial struggles, safeguarding against potential disruptions to the supply chain.
Reputation and references are another pivotal criterion. Seeking references from previous contracts allows Procurement Managers to gauge a supplier’s track record in successfully delivering on similar commitments. Independent reviews and informal market inquiries supplement this information, providing a holistic understanding of a supplier’s performance. However, caution is advised in overreliance on past performance, as variables like personnel changes or contract scale differences may impact outcomes. Recognizing that past shortcomings may have been addressed internally further emphasizes the need for a balanced approach to reference evaluation.
Thirdly, Quality. Beyond the product itself, considerations extend to the supplier’s technological capabilities, manufacturing processes, and relevant accreditations such as ISO 9001. Physical visits to supplier sites may be warranted, especially for products like raw materials where samples can be requested. Adhering to recognized safety standards and assessing factors like fire retardancy ensures that the quality of manufactured goods aligns with established benchmarks.
Next, Availability is another important criteria to consider. Procurement Managers must evaluate a supplier’s capacity and capability to meet specific requirements. Inquiries about existing contracts and flexibility in response to demand fluctuations provide insights into a supplier’s commitment and responsiveness. Assessing the supplier’s workload and the significance of the buyer in their client portfolio helps determine the level of attention and service the buyer can expect. A buyer may wish to avoid working for a supplier who is already stretched very thinly with other contracts.
Corporate Social Responsibility (CSR) policies and ethical considerations have gained prominence in supplier selection. Beyond legal compliance, Procurement Managers may scrutinize a supplier’s history for convictions or negative press related to corruption, bribery, or fraud. The presence of a Modern Slavery Policy and Environmental Policy, along with relevant accreditations like ISO14001 or Fair Trade certification, attests to a supplier’s commitment to ethical and sustainable practices. Procurement would likely seek to appoint a supplier who’s CSR vision aligns with their own company’s.
Lastly, added value is an important criteria to consider. This is particularly so for Public Sector Organizations governed by the Social Value Act. In addition to meeting contractual requirements, suppliers may offer knowledge sharing, training, improved processes, or contribute to social value by employing local community members or providing apprenticeships. This criterion aligns procurement decisions with broader organizational goals, enhancing the overall impact of supplier relationships and benefitting the local community.
In conclusion, a careful combination of financial scrutiny, reputation assessment, quality evaluation, availability considerations, CSR policies, and added value analysis forms the bedrock of effective supplier selection in the procurement cycle. Procurement Managers, armed with a holistic understanding of these criteria, should seek not only to fulfil immediate needs, but also consider the long-term impact of supplier appointments.
Tutor Notes
– A ‘good’ scoring answer (50-70%) will explain the criteria well and give examples. If you’re looking for a distinction level answer (70% +) you could also mention advantages, disadvantages and risks associated with each of the criteri a. For example, when looking at references and reputation it’s important to know that a supplier would only ever provide a good reference to you, they would never tell you of a contract that failed. Another example is that financial data may be skewed- a supplier may have a low score if they are just starting up or have recently remortgaged a property. It’s therefore important to get a commentary as well as the figures / scores.
– You could also mention that criteria could be weighted e.g. more importance given to quality than financial status and also consider how easy or difficult it would be to get the information e.g. a supplier may say they have lots of availability to deliver the service you require, but they may just be saying this to win business. How do you know for sure?
– Social Value Act isn’t in this syllabus. If you work in Public Sector procurement it’s something you’ll be very familiar with. If you don’t or you’re outside of the UK do not worry about this. I’ve just included it to show how you can bring in your own knowledge to questions like this. You could think of particular criteria that’s important to your industry and write about that. The Social Value Act: What is it, and why is it important? (samtaler.co.uk)
– Study guide p.77

See the solution in Explanation part below.
Explanation:
How to approach this question:
– Define stakeholder mapping – completing an analysis of the stakeholders of an organisation and dividing them into categories depending on certain characteristics. This is often represented visually on a graph or matrix.
– Describe a Stakeholder mapping tool – the most common tool is Mendelow’s Stakeholder Matrix so I would recommend using this one. It is explained in detail in the study guide. However, the question is open so you could choose to describe another tool such as Edgar’s Stakeholder Position Analysis if you so wished. You wouldn’t be wrong choosing this, but honestly, I’d just go for Mendelow. You can’t go wrong with Mendelow. Because the Matrix has 4 sections you can imagine you’d get 5 points for the definition of stakeholder mapping, and 5 points for each of the quadrants of the matrix.
Essay Plan:
Introduction – The reason why stakeholder mapping is important is because interests and expectations of stakeholder groups will be different and possibly conflicting. Mapping this allows an organisation to see the variety and decide on an appropriate management style for each stakeholder group.
Paragraph 1 – Mendelow’s Power / Interest Matrix maps stakeholders based on their influencing power and the strength of their motivation to use that power. It uses a 2×2 grid and defines power as high or low and interest and high or low. It then provides four strategies for managing the stakeholders based on which quadrant of the grid the stakeholder falls into. These 4 categories are:
Paragraph 2 – Keep satisfied – high power but low interest. If the stakeholder becomes dissatisfied or concerned their interest may peak. Examples include regulatory bodies, shareholders, senior management.
The best approach is to keep them up to date so they are informed of what is going on, but do not burden them with information they do not need.
Paragraph 3 – Manage Closely – AKA Key players – includes major customers, key suppliers, partners, senior management. These stakeholders need to know everything that is going on and approve of what is going on.
The recommended strategy is early involvement and participation, and integrating their goals with yours. This group requires regular communication and meetings. You should take their opinions on board.
Paragraph 4- Monitor – minimum effort required – this is the low priority group as they have low power and low interest. Includes small volume suppliers and other organisational functions with no direct interest in your activities. This group does not need to receive regular communication.
Paragraph 5 – Keep informed – high interest, but low power. If they’re not kept in the loop and understand the need for decisions, they may lobby together to protect their interest if they feel threatened. Employee groups, suppliers and community groups may be in this category. This group should receive regular communication.
Conclusion – Mendelow created the matrix in 1991 and it is still used today. It is a popular management tool due to its simplicity. It’s important to notes that stakeholders can move through the matrix- it isn’t stagnant.
For example, at the beginning of a project a manager in another department may be classed as ‘low priority’ because they are seen to have no interest and no power in the project. However, as the project progresses the manager may become interested. They will then transfer into the keep informed category. Therefore, the matrix should be redone regularly throughout the lifetime of a project to capture any movements. The matrix should also be redone for each individual project – it cannot be assumed that a stakeholder who had interest in one project would be interested in another.
Tutor Notes
– The above essay plan is basically the entire essay, I got carried away. The only thing you’d need to add into that is an example of a stakeholder for each of the sections! (e.g. the CEO is high power, but low interest stakeholder for the procurement department. He/ She doesn’t care about the day to day operations but should be kept informed of any big news). For your examples you could use your own place of work.
– At level 4 you don’t have to analyse the model, you just have to be able to memorise it and repeat it.
Mendelow comes up again at Level 5 and 6 in a bit more detail. If you want to score super bonus points you could mention in your conclusion that the main disadvantage of Mendelow’s Matrix is that it doesn’t take into consideration the stakeholder’s position on the project – whether they’re for it or against it. Therefore, it doesn’t provide the full picture or provide much help on how to manage stakeholders. E.g. two stakeholders might both be in ‘manage closely’ section, but one is for the project and the other against – they’d need to be handled very differently!
– Study guide p. 65

See the solution in Explanation part below
Explanation:
– Mention of some of the following benefits with at least one example provided against each; cost savings, time savings, more efficient, higher levels of transparency, easier to access historical records to inform upon decision making, mitigates risks such as fraudulent spending, easier to track spend against budgets, ensures compliance with regulations, provides ‘real-time’ information, paperless communications (so more environmentally friendly), assists in Supply Chain Management and integration with supply partners.
– I’d suggest 5 is a good amount to aim for
Example Essay
Procurement stands to gain numerous benefits from the adoption of electronic systems. These electronic tools and systems bring efficiency, accuracy, transparency, and cost-effectiveness to the procurement process. Here are several compelling reasons why procurement should leverage electronic systems:
Cost savings – the use of electronic tools saves organisations money. Although there is an initial cost outlay, over time the systems will save the organisation money. For example the use of e-procurement tools can save money by accessing a wider pool of suppliers. For example, when using an e-sourcing portal, a tender may reach a larger number of suppliers- this makes the tender more competitive thus driving down prices. Compared to traditional methods such as phoning suppliers for prices, the use of electronic portals encourages suppliers to ‘sharpen their pencils’ and provide the best prices in order to win work. Money is also saved as communication is digital (so there is no costs for paper and postage).
Time savings – electronic tools automate a lot of processes which saves time. An example of this is e-requisitioning tools where orders can be placed automatically by a piece of technology when quantities of a material reach a certain level. For example, in a cake manufacturing organisation they may use an MRP system which calculates how many eggs are required per day. The machine knows that when the company only have 50 eggs left, a new order needs to be issued to the supplier. The MRP system (e-requisitioning system) therefore saves time as the Procurement department doesn’t have to manually pick up the phone to place the order with the supplier- it is done automatically.
Access to higher levels of information – e-Procurement gives you centralised access to all your dat a. You can access the system to look at historical purchases with ease compared to having to dig through folders and filing cabinets. For example, an electronic PO system will hold details of all historical POs, this means if someone has a question about a PO that was raised 4 months ago, finding the information is much easier and quicker. Some systems may also be able to provide analytical data such as changes to spend over time, or which suppliers a buyer spends the most money with. This higher level of information can help inform upon future decision making. For example, if the organisation wishes to consolidate its supplier base it would look through historical data provided by the electronic system to find out which suppliers are used the least and remove these from the ‘pre-approved supplier list’. This level of data might not be available in manual systems.
Better budget tracking – using electronic systems allows for real-time information to be collected which allows Procurement Managers to see where spend is compared to forecasts and budgets. An example of this is in the use of Pre-Payment Cards – rather than giving staff members petty cash to make transactions and having to chase this up and collect receipts and change, a pre-payment card usually comes with an online portal where a manager can see what has been purchased and the remaining budget on that card for the month. A manager may be able to see for example that a member of staff has spend £300 of their allotted £500 monthly allowance.
Higher levels of transparency and control – using E-procurement tools allows an organisation to track who is ordering what. For example, an e-requisitioning tool may allow Procurement Assistants to make purchases up to £500 but set an automatic escalation if they try to buy something of higher value. This allows for Management to have greater levels of visibility and more control over spending. Another example of transparency and control is in the use of e-sourcing tools to run a competitive tender exercise. All communication between the buyer and suppliers is tracked on the system and award letters can be sent via the system too. This reduces the risk of information being lost.
Environmental benefits- the use of e-procurement tools means that there is less paperwork involved. For example, rather than creating a physical PO which needs to be signed by a manager, an electronic system can allow a manager to sign-off the purchase by clicking a button. This means there is no requirement for the document to be printed. This saves paper and thus has a positive on the environment. Using electronic systems may help an organisation achieve their environmental targets.
In conclusion there are numerous benefits for procurement to adopt e-procurement tools. Depending on the sector and requirements of each individualised company, some advantages may be more pertinent than others, but it is undeniable that technology is helping to shape the industry into a value adding function of organisations.
Tutor Notes
– With an essay like this you could use subheadings and number the advantages if you like. It’s a good idea to do one advantage per paragraph and using formatting really helps the examiner to read your essay.
– study guide p.108

See the solution in Explanation part below
Explanation:
How to approach this question
– This question is very vague. Sometimes CIPS do this. It allows for you to be a bit more free in your response, but can also be quite stressful because you don’t 100% know what they’re after.
– For this question we’re looking at competitions, so full tenders where lots of suppliers are invited to bid for an opportunity. This means the type of things we could be discussing include; IP, cartels, merger controls and monopolies.
Example Essay
Procurement professionals operate within a legal framework that regulates competition, aiming to ensure fair business practices and prevent anti-competitive behaviour. Three critical areas of regulation related to competition that procurement professionals should be aware of include intellectual property, cartels, and merger controls.
Intellectual Property (IP):
Intellectual property encompasses creations of the mind, such as inventions, designs, and brand names, protected by law. In the context of procurement, understanding intellectual property is essential when dealing with suppliers’ products, technologies, or services that may involve intellectual property rights.
Procurement professionals must be aware of the intellectual property rights associated with the goods or services they are procuring. This includes respecting patents, trademarks, copyrights, and trade secrets owned by suppliers. Due diligence is crucial to ensure that the products or services being procured do not infringe on the intellectual property rights of others, requiring verification of legal ownership and legitimacy. An example of something procurement should look out for include ensuring goods are authentic and not counterfeit.
Cartels:
Cartels involve agreements between competitors to control prices, manipulate markets, or restrict competition. For procurement professionals, it is imperative to be vigilant and avoid engaging in or unintentionally supporting cartel activities. Procurement professionals should refrain from participating in anti-competitive behaviour, such as bid-rigging or price-fixing, which are common cartel activities. This involves not colluding with suppliers or competitors to manipulate procurement processes. Maintaining open and fair competition is essential, ensuring that procurement processes remain transparent, competitive, and free from attempts to distort market dynamics, thereby preventing the formation of cartels and promoting a level playing field.
One notable example involved the construction industry in the UK. In 2019, the Competition and Markets Authority (CMA) fined three major suppliers to the construction industry for participating in a cartel. The companies, which supplied concrete drainage products, were found to have coordinated their behaviour to share markets, fix prices, and rig bids. The investigation revealed that these companies had breached competition law by engaging in anti-competitive practices that limited competition and negatively impacted customers. The fines imposed were part of the CMA’s efforts to deter and penalize such cartel behaviour, emphasizing the importance of fair competition in procurement. The Directors of the companies have also been banned from undertaking the role of Director of any company for 12 years.
Merger Controls:
Merger controls are regulations overseeing the consolidation of companies, mergers, and acquisitions to prevent monopolistic practices and protect fair competition. Procurement professionals need to be aware of these regulations, especially when dealing with suppliers undergoing mergers or acquisitions.
Staying informed about mergers and acquisitions within the supplier base is crucial. If a key supplier undergoes such changes, it may impact the stability of the supply chain or alter market dynamics. Procurement professionals need to be aware of potential changes in supplier relationships, pricing structures, or product/service availability resulting from mergers. Engaging in proactive risk management and contingency planning is necessary to mitigate any negative impacts on procurement operations.
Mergers are actively watched in the UK by the Competition and Markets Authority, and where rules are broken, the CMA can intervene and even prevent mergers from happening. A notable example of this was the attempted merger between JD Sports and Footasylum – the companies were fined millions of pounds for exchanging information and attempting to collude and distort the marketplace.
In conclusion, procurement professionals play a crucial role in navigating these regulatory landscapes effectively. Understanding intellectual property, avoiding cartel activities, and staying informed about merger controls contribute to fostering fair and transparent competition within the marketplace.
Tutor Notes
– The construction example of a cartel can be found here Supply of precast concrete drainage products: civil investigation – GOV.UK (www.gov.uk) but feel free to use your own!
– The JD/ Footasylum one is here: JD Sports and Footasylum fined £4.7m for competition breach – BBC News. Basically, the CMA got involved because the two firms were sharing private information and having secret meetings, with the intention that they could combine. The CMA thought it was super dodgy and that it would distort the trainer / footwear market in the UK so they fined the companies and told them to stop it.
– The study guide is a bit light on this topic, so I would do a bit of extra research and have an example in your back pocket for if you need it. P. 142 If you want an example of IP issues- Shein is a great company to look at- ‘They took my world’: fashion giant Shein accused of art theft | Art and design | The Guardian

See the solution in Explanation part below
Explanation:
– This is essentially two mini essays, so you can do them completely separately if you like.
1) Definition of centralised procurement – when an organisation has a designated procurement function which makes purchases on behalf of other teams. When departments need to make a purchase, they would do this by approaching the procurement department who would purchase the item they need. This is in contrast to devolved procurement where departments can make purchases themselves.
2) of 2 forms of hybrid structures- there’s a couple in the study guide you can pick from – consortium, shared services, lead buyer and outsourced. In the old syllabus they used to discuss SCAN – Strategically Controlled Action Network and CLAN = Centre Led Action Network. This has been removed from the new syllabus, but I don’t think it would be wrong to use SCAN and CLAN in this essay if you wanted to. However they are more complicated than the others and if you can talk about other models instead I’d definitely go for that.
Example Essay:
Centralized procurement refers to a procurement strategy where an organization consolidates its purchasing activities into a single, central department or unit. Instead of allowing individual departments or divisions within the organization to independently manage their procurement processes, centralized procurement involves the concentration of these activities under a unified structure.
Key features of centralized procurement include:
1) Single Procurement Authority: In a centralized procurement system, there is a designated procurement authority or department responsible for handling all purchasing decisions. This central entity has the authority to negotiate contracts, select suppliers, and make procurement-related decisions on behalf of the entire organization.
2) Streamlined Processes: Centralized procurement aims to standardize and streamline procurement processes across the organization. This can include the establishment of uniform procurement policies, procedures, and documentation to ensure consistency and efficiency.
3) Economies of Scale: By consolidating purchasing power, centralized procurement allows organizations to leverage economies of scale. Bulk purchases, standardized contracts, and negotiations with suppliers on a larger scale can lead to cost savings and more favourable terms.
4) Improved Coordination and Communication: Centralized procurement enhances coordination and communication within the organization. With a centralized structure, there is better visibility into overall procurement activities, allowing for improved collaboration, information sharing, and strategic planning. Moreover, this centralized control helps manage risks, ensure transparency, and monitor adherence to ethical and legal standards.
5) Consolidated Supplier Relationships: Centralized procurement enables the organization to consolidate its relationships with suppliers. This can lead to stronger partnerships, better negotiation positions, and improved collaboration with a select group of suppliers that meet the organization’s needs.
6) Strategic Decision-Making: Centralized procurement allows organizations to make strategic decisions at a higher level. This includes aligning procurement strategies with overall organizational goals, optimizing the supply chain, and contributing to broader business objectives.
An example of centralised procurement would be in a hotel chain with several hotels across the UK. In a centralised procurement function there would be one team responsible for ordering everything for all of the hotels, rather than allowing the individual hotels to buy things themselves. Premier Inn is an example of a company that uses this structure- it allows them to buy stock in bulk and ensures that all hotels have the same equipment so customers expectations are always met.
Centralized procurement is often contrasted with decentralized procurement, where individual departments or business units manage their procurement independently (i.e. each hotel would buy their own supplies). The choice between centralized and decentralized procurement depends on various factors, including the size and structure of the organization, the nature of its operations, and the specific goals it aims to achieve through its procurement processes.
Consortium Procurement Model:
The consortium procurement model is characterized by the collaboration of multiple organizations forming a joint group (the consortium) to engage in collective buying activities. Typically composed of entities from the same industry or sector, these organizations unite their resources, expertise, and purchasing power to pursue shared procurement objectives. The consortium leverages this collective strength to negotiate contracts, conduct bulk purchases, and benefit from economies of scale, resulting in cost savings and increased operational efficiency. The UK University sector is an example of Consortium activities- many universities come together to ‘group buy’ items as this brings about many benefits.
The main benefit of this form of hybrid procurement model is the increased negotiating power and leverage derived from combining the purchasing volumes of participating entities. This often results in more favourable terms, competitive prices (through bulk purchases), and improved conditions with suppliers. Additionally, consortium buying allows organizations to share resources, knowledge, and expertise, fostering a collaborative environment that enhances overall procurement capabilities. By working together, consortium members can collectively address challenges, negotiate strategically, and navigate the procurement landscape more effectively.
However, consortium buying is not without its challenges. A potential disadvantage lies in the complexity of managing a collaborative procurement structure, involving coordination among diverse entities. Achieving consensus on procurement strategies, vendor selection, and contract terms may require considerable effort and compromise. Additionally, individual organizational needs and preferences within the consortium may differ, posing challenges in aligning priorities. It is essential to strike a balance between centralized decision-making and accommodating the specific requirements of each consortium member. Furthermore, the success of consortium buying relies heavily on effective communication and trust among participants. Any breakdown in communication or lack of trust could hinder the collaborative process, impacting the overall efficiency and success of the consortium’s procurement endeavours.
Overall, while consortium buying offers notable advantages, its effectiveness is contingent on careful management of collaborative dynamics and effective communication strategies.
Shared Services Procurement Model:
In the shared services procurement model, various departments or business units within a single organization converge under a centralized procurement function. Rather than individual units managing their procurement independently, a dedicated shared services centre is established to provide procurement-related services across the organization. This model facilitates streamlined processes, ensures consistency through standardized procedures, and capitalizes on economies of scale.
One key benefit is the potential for cost savings through economies of scale. By centralizing procurement, the organization can negotiate bulk purchases and standardized contracts, leading to better terms and prices. This consolidation of purchasing power enables the organization to optimize its resources and achieve overall cost efficiency. Additionally, centralized procurement allows for streamlined processes, standardized procedures, and better control over procurement activities. It promotes consistency, reduces redundancy, and ensures adherence to organizational policies and compliance requirements.
However, there are also potential disadvantages to centralized procurement. One notable challenge is the potential for reduced flexibility in meeting the unique needs of individual departments or business units within the organization. Centralization may lead to standardized approaches that might not be well-suited for all units, potentially impacting their specific requirements. Furthermore, the centralization of decision-making can result in increased bureaucracy and longer decision-making processes, potentially slowing down procurement activities. Additionally, there may be resistance from decentralized units that are accustomed to managing their procurement independently. Striking a balance between centralized control and accommodating the diverse needs of various units is crucial for the success of centralized procurement.
In conclusion, both the consortium and shared services procurement models represent strategies to enhance efficiency, realize cost savings, and optimize procurement processes. While the consortium model involves collaboration with external entities, the shared services model centralizes procurement functions within a single organization. The choice between these models depends on the unique goals, structure, and requirements of the organizations involved, each offering distinct advantages in the pursuit of effective procurement management.
Tutor Notes:
– This is from LO 3.3 p.161 onwards. There’s quite a bit of information on these hybrid models so there’s many ways it can come up as a question. There are different types of consortium, which I didn’t go into in the above essay because it wasn’t asked for as part of the question, but I’d familiarise yourself with this. Also with the pros and cons of each model, and think about when an organisation may choose this type of model.

See the solution in Explanation part below
Explanation:
How to approach this question:
– There are 3 terms and an advantage and disadvantage for each you need to talk about. So that’s 9 things. Out of 25 points you can see you’ll probably only get 1-2 points for each aspect of the question. That shows you the level of detail you need to include – not that much!
– In terms of structure feel free to use headings and bullet points for this one Example Essay Outsourced procurement, shared service units (SSUs), and consortium procurement are distinct approaches to managing procurement activities within organizations. Each method carries its own set of advantages and disadvantages, catering to different organizational needs and circumstances.
Outsourced Procurement: Outsourced procurement involves engaging a procurement consultant or an external organization to provide advice or handle the entire procurement process on behalf of the company. The advantages of outsourced procurement are that it frees up internal resources, allowing them to focus on other tasks. The expertise and skills brought by external consultants can also fill gaps in the organization’s capabilities. Moreover, this approach is flexible, adapting well to irregular procurement needs. However, drawbacks include a potential loss of control, higher costs, the need for an additional management layer, and the risk of losing intellectual property (IP).
Shared Service Unit (SSU): A Shared Service Unit is an internal procurement support function within an organization that various divisions can access for assistance, resembling the outsourcing concept but within the organizational structure. The advantages of SSUs lie in potential cost savings, the ability to aggregate demand, and the establishment of common standards and processes across the company. The expertise utilized is internal, providing a sense of familiarity. The disadvantage is that measuring the success of an SSU can be challenging, and there is a risk of stifling innovation. The unit may also be perceived as remote from end users, and procurement processes might be slower due to serving multiple departments.
Consortium Procurement: Consortium procurement involves a collective effort where separate organizations join forces to purchase goods, thereby increasing their bargaining power. The advantages of this approach are in the aggregated demand, resulting in more economical purchases. Pooling knowledge and expertise within the consortium enhances the collective capabilities of its members, providing a sense of safety in numbers. However, disadvantages include a potential loss of individual organizational power, prolonged decision-making processes within the consortium, challenges in responding quickly to demands, and the potential hindrance to small and medium-sized enterprises (SMEs) competing if demand is aggregated.
In conclusion, organizations must carefully consider their specific needs, priorities, and the nature of their procurement requirements when choosing between outsourced procurement, SSUs, or consortium procurement. Each approach offers unique benefits and challenges, and the decision-making process should align with the organization’s overall goals and strategies.
Tutor Notes:
– I’ve named lots of advantages and disadvantages for each of the models. 1-2 advantages and disadvantages of each is all you need to secure you the marks. Remember you only have 35 minutes to write this. A danger with this type of question is spending too long on one aspect of the question and running out of time to answer the rest of it.
– A good idea is to pace yourself and give yourself 10 minutes per term (outsourced, SSU and consortium) then 5 minutes at the end to review and edit your response.
– Some further details you may wish to include:
– Outsourced procurement – this is often used when the organisation doesn’t have the expertise to procure the item they need. This often happens for complex / technical procurements or highly regulated industries. An example may be a housing provider who runs a block of flats where the lift has just broken down and cannot be fixed. They need to procure a new lift but have no idea how to write a specification for this as they don’t have the technical knowledge of how lifts work. Hiring a consultant who is experienced in tendering for lifts, although expensive, may actually save money by reducing the risk of procuring the wrong thing.
– SSU – a Shared Service Unit acts as a support function for the organisation. This is described in Porter’s Value Chain- all other departments can call on the SSU when they require assistance. The SSU is responsible for managing its own costs, employs its own resources and may have contractual agreements with other divisions. The main aim of the SSU is to add value. SSUs are common in large organisations where the core activities don’t revolve around procurement (such as finance and service industries).
– Consortium – Consortium buying is encouraged in the public sector in order to maximise value for money. Consortiums can create their own Frameworks. There is a risk that large consortia can abuse their dominant market position.
– LO 3.3 p. 161

See the solution in Explanation part below
Explanation:
How to approach this question
– The first question can be a simple introduction with a bit of extra detail. The main ‘meat’ to your essay is going to be explaining the three sectors, their characteristics and example businesses.
– Aim for three well explained characteristics as a minimum
Example essay
An industry sector refers to a broad category or grouping of businesses and economic activities that share similar characteristics and functions in the production and distribution of goods and services. These sectors are often classified into three main categories: Primary, Secondary, and Tertiary. Here are the main characteristics and types of businesses you will find in each of these industry sectors:
1. Primary Sector:
* Characteristics: The primary sector involves activities related to the extraction and production of raw materials and natural resources directly from the environment. This sector relies on nature and weather patterns: businesses in the primary sector are highly dependent on natural factors such as climate, weather, soil quality, and geographic location. These factors can significantly impact the productivity and profitability of primary sector activities. Extreme weather such as floods can severely impact this sector. Moreover there is a seasonality to this sector and many activities in the primary sector require a significant amount of manual labour, particularly in agriculture, fishing, and forestry. However, modern technology has also been integrated into some primary sector activities to increase efficiency.
* Types of Businesses: a. Agriculture: This includes farming, crop cultivation, livestock raising, and forestry. b. Mining and Extraction. c. Fishing and Aquaculture: Forestry and Logging: Includes the harvesting of timber and related activities.
2. Secondary Sector:
* Characteristic: The secondary sector focuses on the transformation of raw materials and intermediate goods into finished products. The main characteristic of the sector is that it requires high levels of machinery and industrial techniques. There is a reliance on technology. Secondly, the secondary sector adds significant value to the products compared to their raw material form. This value addition is achieved through processing, assembly, and quality control processes. The third main characteristic is standardisation: Manufacturing processes often involve standardization of components and processes to ensure consistency and quality in the final products. Standardization helps in economies of scale.
* Types of Businesses: a. Manufacturing: This sector includes factories and plants that produce tangible goods such as automobiles, electronics, textiles, and machinery. b. Construction: Involves the building and construction of structures like buildings, bridges, and infrastructure. c. Utilities: Companies providing essential services like electricity, gas, and water supply fall into this category.
3. Tertiary Sector:
* Characteristic: The tertiary sector is also known as the service sector and involves businesses that offer various services to consumers and other businesses. The main defining characteristic of this sector is Intangibility: Services are intangible and cannot be touched or held. They are often experienced directly by consumers through interactions with service providers or through the use of technology. Secondly, High Human Involvement: The tertiary sector relies heavily on a skilled and often highly educated workforce to deliver services effectively. This can include professionals such as doctors, lawyers, teachers, and customer service representatives. Lastly, Customization: Many services are customized to meet the specific needs and preferences of individual clients or customers. This personalization is a key characteristic of the tertiary sector. For example Legal Advice will always be different depending on the specific needs of the client.
* Types of Businesses: a. Retail and Wholesale: Businesses engaged in the sale of goods to consumers or to other businesses. b. Healthcare and Education: This includes hospitals, clinics, schools, colleges, and universities. c. Financial Services: Banks, insurance companies, and investment firms are part of this sector. d. Hospitality and Tourism: Hotels, restaurants, travel agencies, and entertainment venues fall into this category. e. Professional Services: Legal, accounting, consulting, and IT services are part of the tertiary sector.
These industry sectors represent the different stages of economic activity, with the primary sector providing raw materials, the secondary sector processing and manufacturing goods, and the tertiary sector offering services and distribution. Together, these sectors form the backbone of an economy, contributing to its growth and development Tutor Notes
– I’ve gone overboard on naming the types of organisation in the different sectors. You don’t have to remember all of these. 3 examples is sufficient to get good marks. I’ve just named them all so you can see what could be considered a right answer.
– Some people are talking about Quaternary and Quinary Sectors. CIPS is not one of those people, so don’t worry if you come across those terms in any further reading. But FYI
1.
* Quaternary Sector: This sector involves knowledge-based activities, including research and development, information technology, and data analysis.
* Quinary Sector: The quinary sector comprises high-level decision-making and leadership roles in areas such as government, academia, healthcare, and top-level corporate management.
– LO 4.1 p.196

See the solution inExplanation partbelow.
Explanation:
1) A definition of Value for Money: ensuring a purchase is cost effective. This may be that the purchase achieves the 5 Rights of Procurement or that the purchase achieves the 4Es: Economy, Efficiency, Effectiveness and Equity. – this is only worth 5 points, so don’t spend too long on this
2) 4 techniques Bob can use to achieve VFM: this is the bulk of your essay. Each of the 4 will be worth 5 points, so remember to give a thoroughExplanation:and example. Pick 4 from the list below: complete a value analysis to eliminate non-essential features, minimise variety/ consolidate demand, avoid over specification, pro-active sourcing, whole life costing methodologies, eliminate / reduce inventory, use electronic systems, international sourcing, sustainability / environmental policies, currency/ exchange rate considerations, negotiating good payment terms, packaging, warrantees.
Example Essay:
“Value for money” (VFM) is a concept that refers to obtaining the best possible return on investment or benefits relative to the cost incurred. It involves assessing whether the goods, services, or activities provided offer an optimal balance between their cost and the quality, benefits, or outcomes they deliver.
Value for money is not solely about choosing the cheapest option; instead, it considers the overall efficiency, effectiveness, and long-term value derived from an expenditure. For Bob, the Procurement Manager at ABC Ltd there are four key ways that he can achieve this for all future purchases.
Value Engineering
This is looking at the components of a product and evaluating the value of each component individually.
You can then eliminate any components that do not add value to the end product. To do this Bob would choose a product to review and determine whether any parts of this can be omitted (thus saving the company money) or could be replaced by components that are of a higher quality at the same price (thus providing added value to the customer). For example, Bob could complete a Value Engineering exercise on the new mobile phone prototype ABC plan to release next year. His findings may discover a way to provide a higher quality camera at no additional cost or that some components don’t add value and can be eliminated.
Consolidate demand
Bob can achieve value for money by consolidating demand at ABC ltd. This would mean rather than each individual person/ department ordering what they want when they need it, Bob creates a centralised process for ordering items in bulk for the departments to share. For example, if each department require stationary to be ordered, Bob can consolidate this demand and create one big order each quarter. This will likely result in cost savings for ABC as suppliers often offer discounts for large orders. Moreover, consolidating demand will allow for saving in time (one person does the task once, rather than lots of people doing the same task and duplicating work).
International sourcing
Bob may find there is value for money in changing suppliers and looking at international sourcing.
Often other countries outside of the UK can offer the same products at a lower cost. An example of this is manufactured goods from China. By looking at international supply chains, Bob may be able to make cost-savings for ABC. He should be sure that when using this technique there is no compromise on quality.
Whole Life Costing methodology
This is a technique Bob can use for procuring capital expenditure items for ABC. This involves looking at the costs of the item throughout its lifecycle and not just the initial purchase price. For example, if Bob needs to buy a new delivery truck he should consider not only the price of the truck, but also the costs of insurance for the truck, how expensive it is to buy replacement parts such as tyres and the cost of disposing of the truck once it reaches the end of its life. By considering these factors Bob will ensure that he buys the truck that represents the best value for money long term.
In conclusion Bob should ensure he uses these four techniques for all items he and his team procures in the future. This will ensure ABC Ltd are always achieving value for money, and thus remain competitive in the marketplace.
Tutor Notes
– This case study is really short, and the ones you’ll receive in the exam are often longer and give you more guidance on what they’re expecting you to write. With case study questions, you have to make your entire answer about Bob. So don’t bring in examples from your own experience, rather, focus on giving examples for Bob.
– A good rule of thumb for case study questions is make sure you reference the case study once per paragraph.
– Value for Money is a really broad topic and you can pretty much argue anything that procurement does is helping to achieve value for money. There’s a large table of stuff that’s considered VFM on p.38 but that table isn’t exhaustive. So feel free to come up with your own ideas for this type of essay.
Some additional tidbits of information on VFM:
– The ‘academic’ definition of Value for Money is ‘the optimum combination of whole life cost and the quality necessary to meet the customer’s requirement’
– Value for Money is an important strategic objective for most organisations but particularly in the public sector. This is because the public sector is financed by public money (taxes), so they must demonstrate that the organisation is using this money wisely. This might be an interesting fact to put into an essay on VFM.
– Value can often be hard to quantify, particularly in the service industry. E.g. in customer service it can be difficult to quantify the value of having knowledgeable and polite employees delivering the service.

See the solution in Explanation part below
Explanation:
How to approach this question
– Remember as you’re preparing an essay plan that this is a case study question, meaning everything has to relate back to Mo and Manufacturer X. So for the 5 areas- think about how this would be applicable for a robotics manufacturer. CIPS don’t expect you to know anything about robotics so if you talk about KPIs for suppliers- just make them up- as long as they sound right-ish that’s all that matters.
– Areas you could talk about include: competition, ethics, KPIs, quality, supplier appraisal, supplier evaluation, sustainability, transparency Example Essay Mo, stepping into the role of Head of Procurement at Manufacturer X during a pivotal period of growth, faces the task of expanding the department and formalizing its policies. In this intricate landscape of a small organization creating bespoke robots, five crucial areas demand Mo’s careful consideration in the drafting of departmental policies and manuals: competition, ethics, quality, supplier evaluation, and sustainability.
Firstly, competition. As Manufacturer X navigates growth, Mo must establish transparent guidelines for competitive bidding processes. It is imperative to ensure fairness in supplier selection and implement strategies for cost competitiveness without compromising quality. Encouraging innovation and collaboration with suppliers becomes a strategic approach to gain a competitive edge in the market. Mo should be careful that his policies do not favour any suppliers over others and that consideration is given to allowing SMEs to bid for work.
Secondly, Ethics. Mo needs to develop an explicit code of ethics guiding procurement professionals in their interactions. This should emphasize honesty, integrity, and fair treatment. Additionally, establishing due diligence procedures to ensure suppliers adhere to ethical business practices, especially concerning labour and environmental standards is important. Moreover, whistleblower protection mechanisms should be put in place to encourage the reporting of ethical concerns without fear of reprisal.
Thirdly, Quality considerations. Given the bespoke nature of the robotics industry and the necessity of maintaining high standards for customer satisfaction, Mo must define and communicate stringent quality requirements to suppliers, emphasizing adherence to specifications and standards. The establishment of robust inspection and testing procedures at various stages of the supply chain is crucial, ensuring consistent component quality. Developing contingency plans and protocols for addressing quality issues promptly, including collaboration with suppliers for continuous improvement, should be integrated.
With the organization’s growth, a systematic approach to supplier evaluation becomes paramount. Mo needs to develop a comprehensive evaluation framework, including criteria such as financial stability, reliability, and past performance. Implementing a supplier scorecard system is essential for tracking and assessing supplier performance over time. Moreover, fostering strategic relationships with key suppliers to promote collaboration, innovation, and long-term partnerships becomes a strategic imperative.
Lastly, Mo should consider sustainability, in particular environmental awareness and the promotion of sustainable practices into the supply chain for long-term viability. Developing sustainability criteria for supplier selection, considering factors such as environmental impact, social responsibility, and ethical sourcing, is imperative. Encouraging suppliers to adopt environmentally friendly practices and certifications, such as ISO14001 or Fair Trade, becomes crucial. The integration of sustainability goals into procurement key performance indicators (KPIs) is essential for tracking progress and demonstrating the organization’s commitment to corporate responsibility.
In conclusion, Mo’s strategic focus on competition, ethics, quality, supplier evaluation, and sustainability is pivotal in laying the foundation for a procurement department that not only supports Manufacturer X’s growth, but also aligns with its values and industry standards. This approach positions the organization for success in the dynamic landscape of bespoke robot manufacturing.
Tutor Notes
– This question is taken from P. 146 – note the question is on policies not strategy. These are slightly different concepts, but they do overlap. Policies are black and white- we do this and we don’t do that. Strategies are about what the company wants to achieve. They’re future orientated, where as a policy is about what we do now. So a policy may include sustainability, but strategy may talk about reducing pollution.
– CIPS could also ask you to talk about procurement strategies such as achieving cost reductions, environmental issues etc. These are also on p.146

See the solution in Explanation part below
Explanation:
Improving compliance with procurement policies and procedures can enable Blake Corporation’s procurement team to add significant value. This is particularly important given the current inconsistent practices and lack of formal training within the organisation.
1. Cost Control and Standardisation of Pricing
Currently, buyers are purchasing materials at varying prices due to inconsistent approaches. By improving compliance, all procurement staff would follow agreed procedures such as using approved suppliers and negotiated contracts.
This would help standardise pricing across the organisation and prevent maverick spending.
For example, if all buyers use framework agreements, the company can leverage economies of scale and reduce overall costs.
Value added:
Lower procurement costs
Improved budget control
Better financial performance
2. Reduced Risk and Improved Governance
Non-compliance exposes Blake Corporation to risks such as fraud, unethical sourcing, and legal issues. A robust compliance regime ensures that procurement activities follow ethical standards and legal requirements.
For instance, clear approval processes and audit trails can prevent unauthorised purchases.
Value added:
Reduced legal and financial risks
Improved transparency and accountability
Stronger corporate governance
3. Improved Supplier Management and Relationships
Compliance with procurement procedures ensures that suppliers are selected and managed consistently. This allows the organisation to build strategic relationships rather than relying on ad hoc purchasing.
For example, early supplier involvement (which is currently limited) can be encouraged through policy, improving collaboration with key suppliers.
Value added:
Better supplier performance
Opportunities for innovation
More reliable supply
4. Increased Efficiency and Process Consistency
The current inconsistent approach leads to inefficiencies and duplication of effort. By standardising processes and ensuring all staff follow them, procurement activities become more streamlined.
For example, clear procedures for sourcing and ordering reduce delays and confusion among staff.
Value added:
Faster procurement cycles
Reduced administrative workload
Greater operational efficiency
5. Enhanced Skills and Professionalism
The case highlights inconsistent training and lack of formal procurement knowledge among staff. Improving compliance would require structured training and clear communication of policies.
This helps ensure all team members understand procurement best practices and their responsibilities.
For example, onboarding programmes and continuous professional development (CPD) can improve capability.
Value added:
More competent procurement team
Consistent application of best practices
Increased credibility of the procurement function
Conclusion
By improving compliance with procurement policies and procedures, Blake Corporation can achieve better cost control, reduce risks, enhance supplier relationships, increase efficiency, and develop staff capability. This will support the new procurement director’s goal of implementing a strategic and value-adding procurement function.

See the solution in Explanation part below.
Explanation:
How to approach this question:
– Your response will need 5 definitions. For 25 points that means 5 points per section so think about the level of detail you’ll need to include. It would be 5 points for electronic system (i.e. your introduction and conclusion), and then do a paragraph on each of the technologies. In the description you could talk about why it’s used and the advantages, and give some examples if you know any.
– Definition of electronic system – a system which uses some form of technology and automates a procurement process than would otherwise have been completed manually.
– E-Requisitioning – a way of ordering goods or services. Includes the use of integrated ordering systems such as: ERP/ ERP II / MRP / MRP II
– E-Catalogue- an electronic display of what goods can be ordered. A simple example of this may be a supplier displaying the goods they offer on their website and the prices to purchase the goods.
– E-Sourcing – this involves the early stages of the tender process- using an electronic portal to find a supplier and / or conduct a tender exercise.
– E-Payment – the P2P part of the cycle (procure to pay) – may involve electronic POs and Invoices, BACS, CHAPS and SWIFT payment systems, and the use of Purchasing Cards Example essay:
Electronic systems, commonly refered to as E-procurement, is the business-to-business or business-to- consumer purchase of goods or services, typically using the Internet or other information/ networking systems such as ERP systems. It has developed in the past 20 years as technology has improved and replaces time- consuming manual processes and is now considered the ‘norm’. Electronic systems and e-procurement can be used throughout the entire supply chain- not just between a single buyer and supplier. Examples of electronic systems including the following:
E-requisitioning
This is often used in manufacturing organisations to order raw materials. An electronic ‘bill of materials’ is created and stock levels are automatically updated. As materials get used and a pre-determined level is reached, this triggers a new order which is placed via an e-requisitioning system such as MRP. It is a technological version of the traditional kan-ban (2 bin) system. E-requisition tools are often cloud-based. It helps buyers simplify the buying process, track orders and provides higher levels of visibility on spend. The main disadvantage to this technology is that it requires technology interfacing between the buyer and suppler, which may be expensive.
E-catalogues
This is a digital or online version of a catalogue- a document that details what you can buy and at what price.
There are two main types – buy side catalogues and sell side catalogues. A buy-side catalogue is an internal system used by a buyer which hosts a list of pre-approved suppliers from whom purchases can be made. It may include details of commonly bought items and the prices. The use of this reduces maverick spending and ensures consistency in purchases (e.g. whenever lightbulbs need to be ordered, the same lightbulbs are ordered so the office lighting is consistent). A sell-side catalogue is provided by a supplier and details what they offer- it often includes prices, any discounts for bulk buying and may also let buyers know of availability (e.g. the website may say only two items remaining). This may be as simple as a price list on their website, available for anyone to view.
E-sourcing
This is a tool that helps a buyer find the most suitable supplier. Examples include e-tendering websites where a buyer can host a competition to find a supplier. E-auctions are also a type of e-sourcing tool. The tool (often a website) hosts all of the tendering documents and allows for buyers and suppliers to communicate during the tender process (for example if there are any clarifications needed on the specification). Using this tool allows for transparency and equal treatment, but also saves time in completing the tender exercise. PQQs can be automated and some e-sourcing tools include the use of Artificial Intelligence which can ‘read’ tender submissions and automatically exclude suppliers who do not fulfil the required criteria.
E-payment technologies
These are methods to pay for goods and services that replace the need for cash and cheques. Examples include online bank transfers, electronic Purchase Orders and Invoices and the use of Pre-Payment cards. These act like credit cards for employees to use when they need to buy supplies. For example, if you have a maintenance team that frequently need to purchase low-value items like screws and paint, you could issue the team with a Pre-Payment card with a certain limit (e.g. £500/ month) so they can buy what they need. The company will then automatically be sent a monthly invoice for all of the purchases. This saves time from having to issue the maintenance team with petty cash for the purchases and allows for greater visibility over spend (e.g. how many screws are typically bought per year?). Another typical use is for staff travel.
In conclusion, procurement teams benefit significantly from leveraging electronic tools, including e- requisitioning, e-catalogues, e-sourcing, and e-payment technologies. The adoption of these electronic tools brings about various advantages that enhance efficiency, transparency, cost-effectiveness, and overall effectiveness in the procurement process. Moreover E-procurement tools has helped develop the procurement function into a professional and respected function and allows for a more pro-active rather than reactive approach to purchasing.
Tutor Notes:
– Fun Fact! In the public sector, it is mandated that electronic systems are used in procurement (Public Contract Regulations 2015) as this helps to achieve the objectives of transparency and equal treatment. Where manual systems are used, it is easy to manipulate the tender process. For example, a buyer could read some tender submissions before the deadline for submission and no one would know, but with an electronic system this is impossible as it locks evaluators out until the deadline has passed and all bidders have submitted their responses. (note PCR 2015 is being replaced in 2024- details are still TBC but the above fun fact will still remain in the new legislation- they’re definitely still going to make it compulsory).
– You could also mention the names of systems if you know any. For example, e-sourcing tools include MyTenders.com and Delta E-Sourcing. PO / Invoice systems include Sage, Xero and QuickBooks.
– The question doesn’t ask for advantages of using these technologies but you could mention this in your answer. Just be sure that this isn’t the focus of your response- the question asks specifically for you to DESCRIBE the systems so detailed Explanation: s and examples are where you will secure the most points.
– p.108

See the solution in Explanation part below
Explanation:
How to approach this question
– This question is testing to see if you know the 4 procurement procedures allowed in the Public Sector which are: open, restricted, competitive dialogue, competitive dialogue with negotiation. The Public Sector is limited in how it can procure due to the Public Contract Regulations, so things like Early Supplier Involvement isn’t an option.
– The question doesn’t specifically say it has to be these four, but these are the ones in the book. Because of the vagueness you could say something like running a competition and awarding via a Framework instead. Talking about Public Private Partnerships could also be appropriate but that is outside of the scope of this module (and Level! It comes up in Level 5). These answers would be accepted.
– Also note that it doesn’t say the UK in the question, so if you answered this about your own country, that would be fine.
Example Essay
Each country’s government has its own regulations relating to how goods, services and works can be procured. The UK’s procurement rules is currently dictated by the Public Procurement Regulations 2015 which is based off EU Procurement Directives. This piece of legislation will likely be superseded in Autumn 2023 due to the UK leaving the EU. Until this point, the PCR allows UK public sector organisations to procure in the following ways: open, restricted, competitive dialogue, competitive dialogue with negotiation Open Procedure: This is the most straightforward and transparent method. A local government issues an open tender for office supplies. Any company that provides these supplies can submit a bid. The government then evaluates all bids based on price, quality, and delivery terms to select the supplier. Any interested supplier can submit a tender. The process is open from the outset, and all submissions are evaluated against pre-defined criteri a. This procedure is used when you wish to attract a large number of bidders for the opportunity and is often posted online on a platform such as Find A Tender.com so that suppliers can find the opportunity. If it is a large contract it is a requirement for details to be published on OJEU. The disadvantage of using this approach is that you may receive many bids which can be time-consuming.
Restricted Procedure: In this method, the public sector organization invites suppliers to express their interest. After a preliminary selection process, only those who meet the criteria are invited to submit tenders. This is used when the opportunity is more technical, for example a healthcare authority needs specialized medical equipment. The authority would requests expressions of interest from suppliers. After reviewing these, it invites a shortlist of qualified suppliers to submit detailed bids for further evaluation. The benefit of this approach is that unsuitable suppliers are weeded out early, this saving time.
Competitive Dialogue: This is used for complex contracts where the organization cannot define the technical means or legal or financial make-up of a project in advance. A dialogue with selected bidders is conducted to develop one or more suitable solutions, which are then put out to tender. For example, a local council is planning a new public transport system but is unsure of the best solution. It enters into a dialogue with several firms specializing in transport systems to explore various options before requesting final bids based on the developed solutions. Suppliers can be eliminated through the dialogue process based on pre-determined criteria.
Competitive Dialogue with Negotiation: Similar to competitive dialogue, but with an added phase of negotiation. It’s used for particularly complex projects where the needs cannot be met without adaptation of readily available solutions. For example: a government department requires a complex IT system that integrates various existing systems. It engages in a competitive dialogue to develop potential solutions and then negotiates with bidders to refine these solutions before finalizing the contract. This procedure allows for negotiations with the winning bidder to readjust requirements if needed.
The approach taken by a public sector organisation will depend on a number of factors, but in particular the complexity of the project and whether there is a pre-determined scope. Other factors to consider include; the time-sensitiveness of the project and how quickly the procurement exercise needs to be completed, the amount of suppliers in the marketplace, and whether suppliers need to be consulted on to create the specification.
Tutor Notes
– These four procedures are outlined on p.212. Post PCR 2015, these procedures may change, or be renamed, depending on what the UK government decide to do. So if you’re taking this exam in November 2024 or later, note that the study guide is now out of date and you should conduct a bit of your own research.
– You could also mention that the value of spend is a factor when public sector organisations are deciding on a procurement route. For really low value stuff, like they need a new sofa for the office, most organisation’s requirements are to get three quotes and compare them. That isn’t in the study guide, it’s just real life (I’ve worked in this sector so know this stuff). Each organisation will have it’s own thresholds for what procurement route needs to be taken, so I wouldn’t comment on that but generally if it’s under £10k there’s quite a bit of flexibility. Where you reach ‘threshold’ then things become very serious and there’s much more scrutiny.
– Thresholds are not part of the syllabus so don’t worry about learning this. But if you’re interested have a read here: New public procurement thresholds from 1 January 2024 – BM Insights – Blake Morgan

See the solution in Explanation part below.
Explanation:
Bottom of Form
Top of Form
– This is an open question. You could really talk about anything. Here’s some ideas of content:

Example Essay
The public and private sectors, while both essential to a nation’s economy, operate under different paradigms, primarily due to their distinct drivers, stakeholders, regulations, procurement aims, and supplier relationships.
Drivers
The most fundamental difference lies in their drivers. Private sector organizations are primarily profit-driven; their existence hinges on their ability to generate profits. This profit influences their strategies, operations, and overall objectives. Conversely, public sector organizations are not driven by profit. Funded by taxpayer money, their primary objective is to deliver services effectively and efficiently to the public. Their success is measured not in financial terms, but in how well they meet the service levels required by the citizens who finance them through taxes.
Stakeholders
The range and influence of stakeholders in the two sectors also differ markedly. In the public sector, the stakeholder base is much broader, encompassing every member of society who interacts with or benefits from public services like healthcare, policing, and road maintenance. However, these stakeholders typically have less power to influence policy or practices. In contrast, stakeholders in the private sector, such as shareholders and customers, often have a more significant influence on company policies and practices. The private sector’s narrower stakeholder base allows for more direct impact and influence from these groups.
Regulations
Regulations in the public sector are generally more stringent than in the private sector. Public sector entities, governed by regulations like PCR 2015, must demonstrate sound procurement practices and are accountable to society at large. This contrasts with the private sector, where companies have more latitude in choosing suppliers and are not obliged to justify their decisions publicly. The private sector faces fewer regulatory constraints, allowing for more flexibility in business decisions.
Procurement Aims
Procurement in the public sector is guided by the principles of efficiency, economy, and effectiveness, often summarized as the ‘3 Es’. The focus is on achieving value for money, considering both quality and price. In contrast, private sector procurement is more diverse in its aims, reflecting the organization’s specific goals, which could range from profit maximization to innovation or sustainability. The private sector’s procurement decisions are more closely aligned with the organization’s unique values and objectives.
Supplier Relationships
Finally, the nature of supplier relationships differs significantly between the two sectors. The public sector is mandated to maintain a certain distance from its suppliers, ensuring equal treatment and open competition, as dictated by regulations like the PCR. This contrasts with the private sector, where companies are free to develop closer, more strategic relationships with preferred suppliers. The private sector can engage in practices like partnerships and Early Supplier Involvement, which are typically not permissible in the public sector due to the need for impartiality and fairness.
In summary, while both sectors aim to deliver services or products effectively, the public sector’s focus on service delivery for the public good, stringent regulations, broad stakeholder base, and specific procurement principles, sets it apart from the private sector’s profit-driven, flexible, and more narrowly focused approach.
Tutor Notes
– At Level 4 the questions are usually explain or describe, so don’t worry too much about doing an in depth
‘compare and contrast’ style of answer. They don’t expect that level of detail here. Simply saying Public Sector does X and Private Sector does Y is all you need.
– I have mentioned PCR 2015 – if you’re taking this exam in 2025 you may need to update this reference with the new regulations.
– LO 4.3 p.220 / p. 226

See the solution in Explanation part below.
Explanation:
– Firstly give a short definition of Code of Ethics: a document that sets out moral principles or values about what is right and wrong.
– What an Ethical Policy should contain: Condition of workers, Environment, H+S, Discrimination, Gift / Bribery Policy, Whistleblowing, Confidentiality, Fair Dealings, Declaration of Conflict of Interests. You won’ t have time to go into depth on all of these, so pick a few where you want to give an example.
– Measures to take if there is a breach: depending on what the breach is and who breached it this could include: education/ training, sanctions, blacklisting, reporting to authorities, publicise the issue, use a performance improvement plan, issue warnings, dismissal.
Example Essay:
A code of ethics is a formal document or set of principles that outlines the values, ethical standards, and expected conduct for individuals within an organization. It serves as a guide for employees and stakeholders, shaping their behaviour and decision-making to align with the organization’s ethical framework. It may take the form of a Mission Statement, Core Values, Specific Guidelines or established reporting mechanisms. The purpose of the Code is to establish standards, promote integrity, mitigate risks and build trust- with both internal and external stakeholders.
A Code of Ethics may contain the following:
– Condition of workers – stating what the company will provide to the employees to make sure the environment is safe. This could include the physical environment but also hours worked, opportunities for breaks etc. Depending on the sector it could detail shift patterns, expectations regarding overtime and compensation.
– Environment – this section would discuss compliance with legislation regarding pollution, disposal of waste materials etc. Depending on the company’s goals- they may have higher commitments to the environment than those imposed by the government. Additional commitments may include NetZero targets or the use of renewable sources of energy.
– H+S- Health and Safety. Ensuring that the working environment is free of hazards and that workers have the training and equipment they need to complete the work safely. E.g. PPE
– Discrimination- a promise not to discriminate based on any characteristic. Aligns with the Equalities Act.
Policy should include how the company would handle situations, for example if an employee reports an issue of discrimination or harassment. This may involve the use of a whistleblowing hotline or details on how to contact HR.
– Gift / Bribery Policy – this area of the code of conduct would explain whether the company allows staff members to receive gifts (e.g. from suppliers) and the processes to complete if they do (e.g. return the item, complete an internal document, donate the gift to charity). Different companies and industries will have different rules surrounding this, the Public Sector is much more likely to reject gifts from suppliers for example.
– Declaration of conflict of interests- this explains what staff should do if there is a conflict. For example if they are running a tender and their father owns one of the suppliers who is bidding for the work. The conflict of interest policy will explain what the person should do, how to report it and have mechanisms in place to ensure that nothing untoward could come of the situation. This may be having another member of staff mark the tender to ensure unbiasedness.
Measures to take in case of a breach
A response to a breach will depend on who breached the policy – whether this is an employee or a supplier. It will also depend on the severity of the breach.
Remedies for a supplier breach could include: education / training if the breach is minor. Supplier development if the relationship with the supplier is very important (for example if there are no other suppliers the buyer could turn to) and the breach is minor. If the breach is major such as fraud or misappropriation of funds, a buyer could look to issue sanctions, claim damages and dismiss the supplier. There could be options to claim liquidated damages if this is included in the contract. For very serious offenses the buyer may blacklist the supplier- never use them ever again and could also report the issue to the police if the breech is also criminal (e.g. modern slavery or fraud).
Remedies for an employee breach could include: for minor breaches training may be required, particularly if it was a junior member of the team and it was an innocent mistake like forgetting to fill out a form when they received a Gift. The employee could be carefully monitored and put on an Improvement Plan. If internal issues are found, such as several staff are breaching the Code of Ethics, senior management could look to review policies to make sure issues are being flagged and responded to in the best way. Employees who fail to follow the Ethical Policy, either through routinely failing to adhere to it or through a major breach could be dismissed from the organisation. There would need to be strong evidence of this.
In conclusion it is important for all organisations regardless of size of industry to have an Ethics Policy.
Sharing the code of ethics with staff is a fundamental step in embedding ethical principles into the organizational culture. Regular communication and training reinforce these principles, fostering a shared commitment to ethical behaviour across all levels of the organization.
Tutor Notes
– In an essay like this it’s always a good example to use examples. They can be hypothetical – you don’t have to know any company’s Ethics policy off by heart. E.g. If a supplier breached a buyer’s Ethical Policy by employing Child Labour in their factories, an appropriate measure for the buyer to take would be to cancel the contract and find another supplier. This is because not only is Child Labour illegal, the buyer will not want to be associated with this supplier as it will have negative repercussions on their image. The best response would therefore be to distance themselves from the supplier.
– Code of Ethics and an Ethics Policy are the same thing. Just different language. The terms can be used interchangeably
– Study guide p. 128

See the solution inExplanation partbelow.
Explanation:
How to approach this question:
– There are 3 terms and an advantage and disadvantage for each you need to talk about. So that’s 9 things. Out of 25 points you can see you’ll probably only get 1-2 points for each aspect of the question. That shows you the level of detail you need to include – not that much!
– In terms of structure feel free to use headings and bullet points for this one Example Essay Outsourced procurement, shared service units (SSUs), and consortium procurement are distinct approaches to managing procurement activities within organizations. Each method carries its own set of advantages and disadvantages, catering to different organizational needs and circumstances.
Outsourced Procurement: Outsourced procurement involves engaging a procurement consultant or an external organization to provide advice or handle the entire procurement process on behalf of the company. The advantages of outsourced procurement are that it frees up internal resources, allowing them to focus on other tasks. The expertise and skills brought by external consultants can also fill gaps in the organization’s capabilities. Moreover, this approach is flexible, adapting well to irregular procurement needs. However, drawbacks include a potential loss of control, higher costs, the need for an additional management layer, and the risk of losing intellectual property (IP).
Shared Service Unit (SSU): A Shared Service Unit is an internal procurement support function within an organization that various divisions can access for assistance, resembling the outsourcing concept but within the organizational structure. The advantages of SSUs lie in potential cost savings, the ability to aggregate demand, and the establishment of common standards and processes across the company. The expertise utilized is internal, providing a sense of familiarity. The disadvantage is that measuring the success of an SSU can be challenging, and there is a risk of stifling innovation. The unit may also be perceived as remote from end users, and procurement processes might be slower due to serving multiple departments.
Consortium Procurement: Consortium procurement involves a collective effort where separate organizations join forces to purchase goods, thereby increasing their bargaining power. The advantages of this approach are in the aggregated demand, resulting in more economical purchases. Pooling knowledge and expertise within the consortium enhances the collective capabilities of its members, providing a sense of safety in numbers.
However, disadvantages include a potential loss of individual organizational power, prolonged decision-making processes within the consortium, challenges in responding quickly to demands, and the potential hindrance to small and medium-sized enterprises (SMEs) competing if demand is aggregated.
In conclusion, organizations must carefully consider their specific needs, priorities, and the nature of their procurement requirements when choosing between outsourced procurement, SSUs, or consortium procurement. Each approach offers unique benefits and challenges, and the decision-making process should align with the organization’s overall goals and strategies.
Tutor Notes:
– I’ve named lots of advantages and disadvantages for each of the models. 1-2 advantages and disadvantages of each is all you need to secure you the marks. Remember you only have 35 minutes to write this. A danger with this type of question is spending too long on one aspect of the question and running out of time to answer the rest of it.
– A good idea is to pace yourself and give yourself 10 minutes per term (outsourced, SSU and consortium) then 5 minutes at the end to review and edit your response.
– Some further details you may wish to include:
– Outsourced procurement – this is often used when the organisation doesn’t have the expertise to procure the item they need. This often happens for complex / technical procurements or highly regulated industries. An example may be a housing provider who runs a block of flats where the lift has just broken down and cannot be fixed. They need to procure a new lift but have no idea how to write a specification for this as they don’t have the technical knowledge of how lifts work. Hiring a consultant who is experienced in tendering for lifts, although expensive, may actually save money by reducing the risk of procuring the wrong thing.
– SSU – a Shared Service Unit acts as a support function for the organisation. This is described in Porter’s Value Chain- all other departments can call on the SSU when they require assistance. The SSU is responsible for managing its own costs, employs its own resources and may have contractual agreements with other divisions. The main aim of the SSU is to add value. SSUs are common in large organisations where the core activities don’t revolve around procurement (such as finance and service industries).
– Consortium – Consortium buying is encouraged in the public sector in order to maximise value for money.
Consortiums can create their own Frameworks. There is a risk that large consortia can abuse their dominant market position.
– LO 3.3 p. 161