Download 300-710 Dumps (2026) – Free PDF Exam Demo [Q135-Q159]

Download 300-710 Dumps (2026) – Free PDF Exam Demo [Q135-Q159]

Rate this post

Download 300-710 Dumps (2026) – Free PDF Exam Demo

Enhance your career with 300-710 PDF Dumps – True Cisco Exam Questions

Cisco 300-710 (Securing Networks with Cisco Firepower) Certification Exam is designed for individuals who want to validate their knowledge and skills in implementing and managing the Cisco Firepower Next-Generation Firewall (NGFW). 300-710 exam is part of the Cisco Certified Network Professional Security (CCNP Security) certification, which is a professional-level certification that validates a candidate’s ability to implement, configure, and troubleshoot Cisco network security solutions.

NEW QUESTION 135

Refer to the exhibit An engineer is modifying an access control pokey to add a rule to inspect all DNS traffic that passes through the firewall After making the change and deploying thepokey they see that DNS traffic is not bang inspected by the Snort engine What is the problem?

The rule must specify the security zone that originates the traffic

The rule must define the source network for inspection as well as the port

The action of the rule is set to trust instead of allow.

The rule is configured with the wrong setting for the source port

NEW QUESTION 136
Which command-line mode is supported from the Cisco Firepower Management Center CLI?

privileged

user

configuration

admin

NEW QUESTION 137

Refer to the exhibit. An engineer is configuring a high-availability solution that has the hardware devices and software versions:
* two Cisco Secure Firewall 9300 Security Appliances with FXOS SW 2.0(1.23)
* software Cisco Secure Firewall Threat Defense 6.0.1.1 (build 1023) on both appliances
* one Cisco Secure Firewall Management Center with SW 6.0.1.1 (build 1023) Which condition must be met to complete the high-availability configuration?

DHCP must be configured on at least one firewall interface.

The version numbers must have the same patch number.

Both firewalls must have the same number of interfaces.

Both firewalls must be in transparent mode.

NEW QUESTION 138
An engineer is reviewing an existing custom server fingerprint on a Cisco Secure Firewall because the current information is inaccurate. Which action must the engineer take to improve the accuracy of the network discovery rules?

Exclude the IP address that is used to communicate with the monitored host.

Exclude the ports that must be skipped.

Add NetFlow monitoring for the network segment.

Set one common rule to override the reports in the multidomain environment.

NEW QUESTION 139
Which two dynamic routing protocols are supported in Firepower Threat Defense without using FlexConfig? (Choose two.)

EIGRP

OSPF

static routing

IS-IS

BGP

NEW QUESTION 140

Refer to the exhibit. An engineer must import three network objects into the Cisco Secure Firewall Management Center by using a CSV file. Which header must be configured in the CSV file to accomplish the task?

NAME;DESCRIPTION;TYPE;VALUE;LOOKUP;

Name; Description; Type;Value;Lookup;

Name; Description; Type;Value;DN;

NAME;DESCRIPTION; TYPE;VALUE;DN;

NEW QUESTION 141
An engineer has been tasked with performing an audit of network objects to determine which objects are duplicated across the various firewall models (Cisco Secure Firewall Threat Defense, Cisco Secure Firewall ASA, and Meraki MX Series) deployed throughout the company. Which tool will assist the engineer in performing that audit?

Cisco Firepower Device Manager

Cisco Defense Orchestrator

Cisco Secure Firewall Management Center

Cisco SecureX

NEW QUESTION 142
Refer to the exhibit. A network engineer is analyzing a Network Risk Report generated in Cisco Secure Firewall Management Center that focuses on network security and efficient bandwidth utilization. Which application should be restricted?

SFTP

BitTorrent

Tivoli

SSH

NEW QUESTION 143
An engineer is setting up a new Firepower deployment and is looking at the default FMC policies to start the implementation. During the initial trial phase, the organization wants to test some common Snort rules while still allowing the majority of network traffic to pass. Which default policy should be used?

Balanced Security and Connectivity

Security Over Connectivity

Maximum Detection

Connectivity Over Security

NEW QUESTION 144
A security engineer is deploying Cisco Secure Endpoint to detect a zero day malware attack with an SHA-256 hash of
47ea931f3e9dc23ec0b0885a80663e30ea013d493f8e88224b570a0464084628. What must be configured in Cisco Secure Endpoint to enable the application to take action based on this hash?

access control rule

correlation policy

transform set

custom detection list

NEW QUESTION 145
An administrator needs to configure Cisco FMC to send a notification email when a data transfer larger than 10 MB is initiated from an internal host outside of standard business hours. Which Cisco FMC feature must be configured to accomplish this task?

file and malware policy

application detector

intrusion policy

correlation policy

NEW QUESTION 146
An engineer must permit SSH on the inside interface of a Cisco Secure Firewall Threat Defense device. SSH is currently permitted only on the management interface. Which type of policy must the engineer configure?

platform policy

access control policy

NAT policy

intrusion policy

NEW QUESTION 147
Encrypted Visibility Engine (EVE) is enabled under which lab on an access control policy in Cisco Secure Firewall Management Centre?

Network Analysis Policy

Advanced

Security Intelligence

SSL

NEW QUESTION 148
An engineer is troubleshooting an intermittent connectivity issue on a Cisco Secure Firewall Threat Defense appliance and must collect 24 hours worth of data. The engineer started a packet capture, however it stops prematurely during this time period. The engineer notices that the packet capture buffer size is set to the default of 32 MB. Which buffer size is the maximum that the engineer must set to enable the packet capture to run successfully?

64 MB

1 GB

10 GB

100 GB

NEW QUESTION 149
There is an increased amount of traffic on the network and for compliance reasons, management needs visibility into the encrypted traffic What is a result of enabling TLS’SSL decryption to allow this visibility?

It prompts the need for a corporate managed certificate

It has minimal performance impact

It is not subject to any Privacy regulations

It will fail if certificate pinning is not enforced

NEW QUESTION 150
Refer to the exhibit. An engineer generates troubleshooting files in Cisco Secure Firewall Management Center (FMC). A successfully completed task is removed before the files are downloaded. Which two actions must be taken to determine the filename and obtain the generated troubleshooting files without regenerating them? (Choose two.)

Use an FTP client Hi expert mode on Secure FMC to upload the files to the FTP server.

Go to the same screen as shown in the exhibit, click Advanced Troubleshooting, enter the rile name, and then start the download

Connect to CU on the FTD67 and FTD66 devices and copy the tiles from flash to the PIP server.

Go to expert mode on Secure FMC, list the contents of/Var/common, and determine the correct filename from the output

Click System Monitoring, then Audit to determine the correct filename from the line containing the Generate Troubleshooting Files string.

NEW QUESTION 151
Refer to the exhibit.

An engineer generates troubleshooting files in Cisco Secure Firewall Management Center (FMC). A successfully completed task Is removed before the files are downloaded. Which two actions must be taken to determine the filename and obtain the generated troubleshooting files without regenerating them? (Choose two.)

Use an FTP client Hi expert mode on Secure FMC lo upload the files to the FTP server.

Go to the same screen as shown in the exhibit, click Advanced Troubleshooting, enter the rile name, and then start the download

Connect to CU on the FTD67 and FTD66 devices and copy the tiles from flash to the PIP server.

Go to expert mode on Secure FMC. list the contents of/Var/common, and determine the correct filename from the output

Click System Monitoring, men Audit to determine the correct filename from the line containing the Generate Troubleshooting Files string.

NEW QUESTION 152
In which two ways do access control policies operate on a Cisco Firepower system? (Choose two.)

Traffic inspection is interrupted temporarily when configuration changes are deployed.

The system performs intrusion inspection followed by file inspection.

They block traffic based on Security Intelligence data.

File policies use an associated variable set to perform intrusion prevention.

The system performs a preliminary inspection on trusted traffic to validate that it matches the trusted parameters.

NEW QUESTION 153
An engineer is reviewing an existing custom server fingerprint on a Cisco Secure Firewall because the current information is inaccurate. Which action must the engineer take to improve the accuracy of the network discovery rules?

Add NetFlow monitoring for the network segment

Exclude the ports that must be skipped.

Set one common rule to override the reports in the multidomain environment.

Exclude the IP address that is used to communicate with the monitored host.

NEW QUESTION 154
An organization wants to secure traffic from their branch office to the headquarter building using Cisco Firepower devices, They want to ensure that their Cisco Firepower devices are not wasting resources on inspecting the VPN traffic. What must be done to meet these requirements?

Configure the Cisco Firepower devices to ignore the VPN traffic using prefilter policies

Enable a flexconfig policy to re-classify VPN traffic so that it no longer appears as interesting traffic

Configure the Cisco Firepower devices to bypass the access control policies for VPN traffic.

Tune the intrusion policies in order to allow the VPN traffic through without inspection

NEW QUESTION 155
An engineer is tasked with deploying an internal perimeter firewall that will support multiple DMZs Each DMZ has a unique private IP subnet range. How is this requirement satisfied?

Deploy the firewall in transparent mode with access control policies.

Deploy the firewall in routed mode with access control policies.

Deploy the firewall in routed mode with NAT configured.

Deploy the firewall in transparent mode with NAT configured.

NEW QUESTION 156
Which command must be run to generate troubleshooting files on an FTD?

system support view-files

sudo sf_troubleshoot.pl

system generate-troubleshoot all

show tech-support

NEW QUESTION 157
An organization has noticed that malware was downloaded from a website that does not currently have a known bad reputation. How will this issue be addresses globally in the quickest way possible and with the least amount of impact?

by denying outbound web access

Cisco Talos will automatically update the policies.

by Isolating the endpoint

by creating a URL object in the policy to block the website

NEW QUESTION 158
Which command should be used on the Cisco FTD CLI to capture all the packets that hit an interface?

configure coredump packet-engine enable

capture-traffic

capture

capture WORD

NEW QUESTION 159
What are two application layer preprocessors? (Choose two.)

CIFS

IMAP

SSL

DNP3

ICMP

Cisco 300-710 certification exam is a professional-level certification exam that validates the knowledge of network administrators and security professionals in securing networks with Cisco Firepower. Securing Networks with Cisco Firepower certification exam is designed to test the skills and knowledge required to deploy, configure, manage, and troubleshoot Cisco Firepower Next-Generation Firewall (NGFW) solutions. The Cisco 300-710 exam is a challenging exam that requires a strong understanding of network security concepts, Cisco Firepower technology, and best practices for securing network infrastructures.

100% Free 300-710 Files For passing the exam Quickly: https://www.test4engine.com/300-710_exam-latest-braindumps.html